loading
ISA CALIBRATION: A TECHNI - Calibration: A Technician's Guide
January 1, 2005 - ISA

This comprehensive review of calibration provides an excellent foundation for understanding principles and applications of the most frequently performed tasks of a technician. Topics addressed include terminology, bench vs. field calibration, loop vs. individual instrument...

API GASOLINE MARKETING - Gasoline Marketing in the 1980s: Structure, Practices, and Public Policy
May 1, 1988 - API

Introduction and Summary Gasoline marketing in this country has undergone significant changes in the last 15 years. In response to these changes, some dealers and other market participants have called for the enactment of divorcement and open supply legislation at both the state and federal levels....

API GASOLINE - GASOLINE
January 1, 1972 - API
A description is not available for this item.
API GASOLINE DISTRIBUTION - API GASOLINE DISTRIBUTION STAGE I MACT WORKSHOP
API
A description is not available for this item.
SEMI GASES - GASES
SEMI
A description is not available for this item.
TEMA FLOW INDUCED - Flow Induced Vibration Analysis Software (FIV)
TEMA
A description is not available for this item.
ASTM D7237-18(2026) - Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
July 15, 2026 - ASTM International

1.1 This test method is used to establish the concentration of free cyanide in an aqueous wastewater, effluent and in-stream free cyanide concentrations after mixing treated water with receiving water. The test conditions of this test method are used to measure free cyanide (HCN and CN-) and...

ASTM F2022-01(2026) - Standard Test Method for Performance of Booster Heaters
March 1, 2026 - ASTM International

5.1 The energy input rate test is used to confirm that the booster heater is operating properly prior to further testing. 5.2 Booster heater flow capacity is an indicator of the booster heater's ability to supply hot water for sanitation. The booster heater's flow capacity can be used...

ASTM E295-82(2025) - Standard Test Method for Measured Speed of Oil Diffusion Pumps
December 1, 2025 - ASTM International

This test method establishes the apparatuses required, calibration and precision of the devices to be used, and the standard procedures for determining the measured speed, or volumetric flow rate, of oil diffusion pumps. This method shall make use of test dome, gage attachment or...

ASTM E1930/E1930M-25 - Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
September 1, 2025 - ASTM International

5.1 General-This procedure is used for evaluation of the structural integrity of atmospheric storage tanks. The AE method can detect flaws which are in locations that are stressed during pressurization. Such locations include the tank wall, welds attaching pads to the tank, nozzle attachments, and...

ASTM D8256-25 - Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
July 1, 2025 - ASTM International

1.1 This test method is commonly referred to as the Sequence VH test, and it has been correlated with the Sequence VG test. The Sequence VG test was previously correlated with vehicles used in stop-and-go service prior to 1996, particularly with regard to sludge and varnish formation.3 It is one of...

ASTM D8256-24b - Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
December 15, 2024 - ASTM International

1.1 This test method is commonly referred to as the Sequence VH test, and it has been correlated with the Sequence VG test. The Sequence VG test was previously correlated with vehicles used in stop-and-go service prior to 1996, particularly with regard to sludge and varnish formation.3 It is one of...

ASTM D3796-09(2024) - Standard Practice for Calibration of Type S Pitot Tubes
May 1, 2024 - ASTM International

1.1 This practice covers the determination of Type S pitot tube coefficients in the gas velocity range from 305?m/min to 1524?m/min or 5.08?m/s to 25.4?m/s (1000?ft/min to 5000?ft/min). The method applies both to the calibration of isolated Type S pitot tubes (see 5.1), and pitobe...

ASTM D3796-09(2024)e1 - Standard Practice for Calibration of Type S Pitot Tubes
May 1, 2024 - ASTM International

1.1 This practice covers the determination of Type S pitot tube coefficients in the gas velocity range from 305?m/min to 1524?m/min or 5.08?m/s to 25.4?m/s (1000?ft/min to 5000?ft/min). The method applies both to the calibration of isolated Type S pitot tubes (see 5.1), and pitobe...

ASTM F2338-24 - Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
November 1, 2024 - ASTM International

5.1 Leaks in medical device, pharmaceutical, and food packages may result in the ingress of unwanted gases (most commonly oxygen), harmful microbiological, or particulate contaminants. Package leaks may appear as imperfections in the package components themselves or at the seal juncture...

ASTM D6331-24 - Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
October 1, 2024 - ASTM International

1.1 This test method2 covers a method for the measurement of particulate matter (dust) concentration in emission gases in concentrations below 20 mg/m3 under standard conditions, with special emphasis of concentrations around 5 mg/m3. 1.2 To meet the requirements of this test method, the...

ASTM D8256-24a - Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
July 1, 2024 - ASTM International

1.1 This test method is commonly referred to as the Sequence VH test, and it has been correlated with the Sequence VG test. The Sequence VG test was previously correlated with vehicles used in stop-and-go service prior to 1996, particularly with regard to sludge and varnish formation.3 It is one of...

ASTM D8256-24 - Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
May 1, 2024 - ASTM International

1.1 This test method is commonly referred to as the Sequence VH test, and it has been correlated with the Sequence VG test. The Sequence VG test was previously correlated with vehicles used in stop-and-go service prior to 1996, particularly with regard to sludge and varnish formation.3 It is one of...

Advertisement