loading
API GASOLINE MARKETING - Gasoline Marketing in the 1980s: Structure, Practices, and Public Policy
May 1, 1988 - API

Introduction and Summary Gasoline marketing in this country has undergone significant changes in the last 15 years. In response to these changes, some dealers and other market participants have called for the enactment of divorcement and open supply legislation at both the state and federal levels....

SEMI GASES - GASES
SEMI
A description is not available for this item.
API GASOLINE - GASOLINE
January 1, 1972 - API
A description is not available for this item.
API GASOLINE DISTRIBUTION - API GASOLINE DISTRIBUTION STAGE I MACT WORKSHOP
API
A description is not available for this item.
API INVENTORIES OF GAS - INVENTORIES OF NATURAL GAS LIQUIDS AND LIQUIFIED REFINERY GASES
December 1, 2019 - API

Inventories of Natural Gas Liquids and Liquefied Refinery Gases presents data on the inventory levels of ethane, propane, isobutane, normal butane and pentanes plus. These inventories, located at natural gas plants, refineries, bulk terminals and in underground storage, are...

ASTM D3452-06(2026) - Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
June 1, 2026 - ASTM International

1.1 This practice covers the identification of polymers in raw rubbers, and cured and uncured compounds, based on a single polymer, by the gas chromatographic patterns of their pyrolysis products (pyrograms). Implementation of this guide presupposes a working knowledge of the principles and...

ASTM D5790-18(2026) - Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
July 1, 2026 - ASTM International

5.1 Purgeable organic compounds have been identified as contaminants in treated drinking water, wastewater, ground water, and Toxicity Characteristic Leaching Procedure (TCLP) leachate. These contaminants may be harmful to the environment and to people. Purge and trap sampling is a generally...

ASTM D3902-90(2026) - Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
June 1, 2026 - ASTM International

2.1 Rubber hose has an inherent characteristic of permitting diffusion of a gas through the hose structure. This test method quantitatively measures the loss of liquefied petroleum gas.

ASTM D4128-18(2026) - Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
July 1, 2026 - ASTM International

1.1 This guide covers the identification and quantitation of organic compounds by gas chromatography/mass spectrometry (GC-MS) (electron impact) that are present or extracted from water and are capable of passing through a gas chromatograph without alteration. This guide can be used...

ASTM D6387-19(2026) - Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
June 1, 2026 - ASTM International

5.1 Earlier methods for characterizing turpentine and related terpene products were based on physical properties, such as those in Specification D13 and Test Methods D801 and D802, and packed column gas chromatography for the major constituents (for example, a-pinene, ß-pinene) as in Test...

ASTM D8681-26 - Standard Test Method for Analysis of Methanol by Gas Chromatography (External Standard)
July 1, 2026 - ASTM International

1.1 This test method covers the determination of organic impurities in commercial methanol and uses those values to determine the purity of methanol (methanol in dry basis) by gas chromatography. 1.2 This test method is applicable to the measurement of methyl formate, ethanol, acetone,...

ASTM D8430-26 - Standard Test Method for Determination of Ammonia Nitrogen by Semi-Automated Gas Diffusion Colorimetry
July 1, 2026 - ASTM International

1.1 This test method covers the determination of ammonia nitrogen in surface water, ground water, drinking water, municipal and industrial wastewater, seawater, and potassium chloride soil extracts. A gas diffusion step eliminates the need for preliminary distillation. 1.2 The applicable...

ASTM G211-14(2026) - Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
July 1, 2026 - ASTM International

1.1 This test method is concerned with the determination of material loss by gas-entrained solid particle impingement erosion with jet nozzle type erosion equipment. This test method can be used in the laboratory to measure the solid particle erosion of different materials and has been used...

ASTM C1457-26 - Standard Test Method for Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
July 1, 2026 - ASTM International

1.1 This test method applies to the determination of hydrogen in nuclear-grade uranium oxide powders and pellets to determine compliance with specifications. Gadolinium oxide (Gd2O3) and gadolinium oxide-uranium oxide powders and pellets may also be analyzed using this test method. 1.2 This...

ASTM D4069-95(2026)e1 - Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
June 1, 2026 - ASTM International

1.1 This standard covers the specifications for physical properties and performance requirements of virgin impregnated activated carbon to be used for the removal of gaseous radioiodine species from gas streams. 1.2 The values stated in SI units are to be regarded as standard. No other units...

ASTM E2024/E2024M-11(2026)e1 - Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
July 1, 2026 - ASTM International

1.1 This practice covers procedures for detecting the sources of gas leaking at the rate of 1?×?10 -5 Pa m3/s [1?×?10-4 std cm3/s] or greater. The tests may be conducted on any object that can be pressurized with a tracer gas that is detectable by a thermal conductivity detector. The...

ASTM D1712-09(2026) - Standard Practice for Resistance of Plastics to Sulfide Staining
July 1, 2026 - ASTM International

4.1 Plastic compositions containing salts of lead, cadmium, copper, antimony, and certain other metals (as stabilizers, pigments, driers, or fillers) may stain due to the formation of a metallic sulfide when in contact with external materials that contain sulfide. The external sulfide source may be...

ASTM D6231/D6231M-26 - Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)
July 1, 2026 - ASTM International

This specification covers the requirements for HFC-125 (pentafluoroethane, C2HF5) as a fire-fighting medium. It does not however address the fire-fighting equipment or hardware that employs HFC-125, the conditions of employing such equipment like hand helds, fixed installations, etc., or the...

Advertisement