Introduction and Summary Gasoline marketing in this country has undergone significant changes in the last 15 years. In response to these changes, some dealers and other market participants have called for the enactment of divorcement and open supply legislation at both the state and federal levels....
1.1 This practice covers the sampling of gas above the insulating liquid of a transformer. A gas sampling bottle collects the gas sample from the gas space that is at a positive pressure. 1.2 Representative samples of gas are taken for analysis to determine their...
1.1 This specification covers selection and application requirements for the design of a thermal insulation system used on cryogenic liquefied natural gas (LNG) Type C tanks that can store LNG at a higher pressure than Type A or Type B tanks. 1.2 Methods and materials for...
5.1 Trace elemental analysis is used to indicate the level of contamination of middle distillate fuels. Trace metals in turbine fuels can cause corrosion and deposition on turbine components at elevated temperatures. Some diesel fuels have specification limit requirements for trace metals to guard...
5.1 General-This procedure is used for evaluation of the structural integrity of atmospheric storage tanks. The AE method can detect flaws which are in locations that are stressed during pressurization. Such locations include the tank wall, welds attaching pads to the tank,...
1.1 This specification provides requirements for the design of thermal insulation systems for cryogenic piping and equipment for liquefied natural gas (LNG)-fueled ship applications. Methods and materials for installation, including jacketing and vapor retarders, are also detailed. 1.2 The...
1.1 This practice addresses sampling of organic compounds (that is, PCBs, dioxins, many pesticides, and similar compounds) from smooth nonporous surfaces using a solvent-wetted wipe sampling method. Samples are collected in a manner that permits the solvent extraction of the organic compound(s) of...
5.1 This test method is used to identify FAMEs and petroleum distillates found in biodiesel products. Derivatization is not necessary to identify FAMEs. 5.1.1 The identification of biodiesel in debris and liquid samples from a fire scene can provide data relevant to judgments regarding...
1.1 This practice covers guidelines for acoustic emission (AE) examinations of pressurized containers made of fiberglass reinforced plastic (FRP) with balsa cores. Containers of this type are commonly used on tank trailers for the transport of hazardous chemicals. 1.2 This practice is...
1.1 This guide is a framework to facilitate moving petroleum underground storage tank (UST) release sites to closure in a manner protective of human and ecological receptors. Alternative ways to assess and address the potential for exposure to human and ecological receptors resulting from...
The purpose of this EEMUA Publication is to supply the outline information necessary for the categorisation, inspection and maintenance of single, double and full containment tanks for the bulk storage of refrigerated liquefied gases down to -165°C, and essentially at atmospheric...
1.1 This specification defines the minimum fuel quality requirements for gaseous fuels consisting primarily of methane blended with up to 10 % hydrogen (H2) by volume when used as an internal combustion engine fuel. 1.2 This specification defines the criteria for blending hydrogen with natural...
1.1 This specification defines the minimum fuel quality requirements for gaseous fuels consisting primarily of methane when used as an internal combustion engine fuel. 1.2 This specification defines the criteria for compressed natural gas (CNG), liquefied natural gas (LNG), renewable...
Narrow Your Results