loading
AS681L - Gas Turbine Engine Performance Presentation for Computer Programs
August 21, 2023 - SAE International

This SAE Aerospace Standard (AS) provides the method for presentation of gas turbine engine steady-state and transient performance calculated using computer programs. It also provides for the presentation of parametric gas turbine data including...

API GASOLINE MARKETING - Gasoline Marketing in the 1980s: Structure, Practices, and Public Policy
May 1, 1988 - API

Introduction and Summary Gasoline marketing in this country has undergone significant changes in the last 15 years. In response to these changes, some dealers and other market participants have called for the enactment of divorcement and open supply legislation at both the state and federal levels....

API GASOLINE - GASOLINE
January 1, 1972 - API
A description is not available for this item.
API GASOLINE DISTRIBUTION - API GASOLINE DISTRIBUTION STAGE I MACT WORKSHOP
API
A description is not available for this item.
SEMI GASES - GASES
SEMI
A description is not available for this item.
AIR4548B - Real-Time Modeling Methods for Gas Turbine Engine Performance
January 20, 2022 - SAE International

This SAE Aerospace Information Report (AIR) provides a review of real-time modeling methodologies for gas turbine engine performance. The application of real-time models and modeling methodologies are discussed. The modeling methodologies addressed in this AIR concentrate on...

ARP7998 - Shared Memory Interface for Gas Turbine Engine Performance Programs
March 23, 2023 - SAE International

This is an initial release of a recommended practice for an interface to supplier simulations that utilize traditional inter-process communication (IPC) methods of shared memory and semaphore communications. These IPC methods are standard practice in the computer science world and allow for...

Gas Turbine Performance 2nd Edition Complete Document
January 1, 2004 - WILEY

This book provides a practical guide to the fundamentals of performance, including the requirements of all major applications: power generation, mechanical drive, automotive, marine and aircraft installations. The new edition includes two additional chapters on performance issues of...

AS4191A - Gas Turbine Engine Performance Presentation for Computer Programs Using Fortran
May 13, 2021 - SAE International

This SAE Aerospace Standard (AS) provides a method for gas turbine engine performance computer programs to be written using Fortran COMMON blocks. If a "function-call application program interface" (API) is to be used, then ARP4868 and ARP5571 are recommended as alternatives to...

ASTM D3241-26 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
March 1, 2026 - ASTM International

5.1 The test results are indicative of fuel performance during gas turbine operation and can be used to assess the level of deposits that form when liquid fuel contacts a heated surface that is at a specified temperature.

ASTM D3241-25a - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
December 1, 2025 - ASTM International

5.1 The test results are indicative of fuel performance during gas turbine operation and can be used to assess the level of deposits that form when liquid fuel contacts a heated surface that is at a specified temperature.

AS681K - Gas Turbine Engine Performance Presentation for Computer Programs
June 6, 2016 - SAE International

This SAE Aerospace Standard (AS) provides the method for presentation of gas turbine engine steady-state and transient performance calculated using computer programs. It also provides for the presentation of parametric gas turbine data including...

ASTM D3241-25 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
October 1, 2025 - ASTM International

5.1 The test results are indicative of fuel performance during gas turbine operation and can be used to assess the level of deposits that form when liquid fuel contacts a heated surface that is at a specified temperature.

ASTM D4304-25 - Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
November 1, 2025 - ASTM International

1.1 This specification covers mineral and synthetic (API group I, II, III, or IV) oils used in steam and gas turbine lubrication systems where the performance requirements demand highly refined mineral or synthetic base oils compounded with rust and oxidation inhibitors plus...

ASTM D3427-26 - Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
June 1, 2026 - ASTM International

1.1 This test method covers the ability of turbine, hydraulic, and gear oils to separate entrained air. Note 1: This test method was developed for hydrocarbon based oils. It may be used for some synthetic fluids; however, the precision statement applies only to hydrocarbon based oils. 1.2...

ASTM D7171-26 - Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
March 1, 2026 - ASTM International

5.1 Hydrogen content represents a fundamental quality of a petroleum distillate that has been correlated with many of the performance characteristics of that product. Combustion properties of gas turbine fuels are related primarily to hydrogen content. As hydrogen content of...

ASTM D6728-16(2025) - Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
November 1, 2025 - ASTM International

1.1 This test method covers the determination of contaminants and materials as a result of corrosion in gas turbine or diesel engine fuels by rotating disc electrode atomic emission spectroscopy (RDE-AES). 1.1.1 The test method is applicable to ASTM Grades 0-GT, 1-GT, 2-GT, 3-GT, and...

Advertisement