loading
API GASOLINE MARKETING - Gasoline Marketing in the 1980s: Structure, Practices, and Public Policy
May 1, 1988 - API

Introduction and Summary Gasoline marketing in this country has undergone significant changes in the last 15 years. In response to these changes, some dealers and other market participants have called for the enactment of divorcement and open supply legislation at both the state and federal levels....

API GASOLINE - GASOLINE
January 1, 1972 - API
A description is not available for this item.
API GASOLINE DISTRIBUTION - API GASOLINE DISTRIBUTION STAGE I MACT WORKSHOP
API
A description is not available for this item.
SEMI GASES - GASES
SEMI
A description is not available for this item.
ASTM D2880-23 - Standard Specification for Gas Turbine Fuel Oils
January 15, 2023 - ASTM International

1.1 This specification covers the grades of fuels for gas turbines, excepting gas turbines used in aircraft, for the guidance of interested parties such as turbine manufacturers and the suppliers and purchasers of fuel oils. These grades are described as follows:...

ASTM D4304-25 - Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
November 1, 2025 - ASTM International

1.1 This specification covers mineral and synthetic (API group I, II, III, or IV) oils used in steam and gas turbine lubrication systems where the performance requirements demand highly refined mineral or synthetic base oils compounded with rust and oxidation inhibitors plus selected...

ASTM D8579-24 - Standard Specification for Polyalkylene Glycol Lubricants Used in Gas Turbines
July 1, 2024 - ASTM International

1.1 This specification1 covers water insoluble and oil soluble polyalkylene glycol based (PAG) lubricants used in gas turbine lubrication systems. 1.2 This specification is intended to define the properties of water insoluble or oil soluble polyalkylene glycol-based turbine...

AIR1900B - Guide to Temperature Monitoring in Aircraft Gas Turbine Engines
September 7, 2023 - SAE International

This SAE Aerospace Information Report (AIR) provides an overview of temperature measurement techniques for various locations of aircraft gas turbine engines while focusing on current usage and methods, systems, selection criteria, and types of hardware.

AS681L - Gas Turbine Engine Performance Presentation for Computer Programs
August 21, 2023 - SAE International

This SAE Aerospace Standard (AS) provides the method for presentation of gas turbine engine steady-state and transient performance calculated using computer programs. It also provides for the presentation of parametric gas turbine data including performance, weight, and...

ASTM D6728-16(2025) - Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
November 1, 2025 - ASTM International

1.1 This test method covers the determination of contaminants and materials as a result of corrosion in gas turbine or diesel engine fuels by rotating disc electrode atomic emission spectroscopy (RDE-AES). 1.1.1 The test method is applicable to ASTM Grades 0-GT, 1-GT, 2-GT, 3-GT, and...

ASTM D2880 - Standard Specification for Gas Turbine Fuel Oils
May 1, 2020 - ASTM

This specification covers the selection of fuels for gas turbines, excepting gas turbines used in aircraft, for the guidance of interested parties such as turbine manufacturers and the suppliers and purchasers of fuel oils. The specification sets forth the...

ASTM D2880-20 - Standard Specification for Gas Turbine Fuel Oils
May 1, 2020 - ASTM International

1.1 This specification covers the selection of fuels for gas turbines, excepting gas turbines used in aircraft, for the guidance of interested parties such as turbine manufacturers and the suppliers and purchasers of fuel oils. The specification sets forth the...

ARP5435A - APU Gas Turbine Engine Test Cell Correlation
May 19, 2023 - SAE International

This paper describes a recommended practice and procedure for the correlation of test cells that are used for the performance testing of APU (auxiliary power unit) engines. Test cell correlation is performed to determine the effect of any given test cell enclosure and equipment on the performance...

AIR1423A - Electromagnetic Compatibility on Gas Turbine Engines for Aircraft Propulsion
February 20, 2023 - SAE International

The purpose of this AIR is to acquaint the aerospace industry with problems in attaining electromagnetic compatibility on gas turbine engines, particularly as used in aircraft. It is also the purpose of this AIR to present guidelines for the application of EMC controls to the engine,...

ASTM E2459-24 - Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
October 1, 2024 - ASTM International

5.1 All noise control features associated with the inlet or exhaust of large industrial fans and gas turbines are, or should be, based upon inlet or exhaust sound power levels in octave bands of frequency. Sound power levels are not directly measurable, however, so they must be...

AIR4548B - Real-Time Modeling Methods for Gas Turbine Engine Performance
January 20, 2022 - SAE International

This SAE Aerospace Information Report (AIR) provides a review of real-time modeling methodologies for gas turbine engine performance. The application of real-time models and modeling methodologies are discussed. The modeling methodologies addressed in this AIR concentrate on the...

ARP876F - Gas Turbine Jet Exhaust Noise Prediction
January 5, 2021 - SAE International

ARP876 is intended to provide specific recommended procedures for the prediction of gas turbine jet exhaust system noise sources. Procedures are issued as separate sections, to allow for future updating as additional methods, consistent with state-of-the-art, become available.

AIR1419D - Inlet Total-Pressure Distortion Considerations for Gas-Turbine Engines
August 1, 2023 - SAE International

This SAE Aerospace Information Report (AIR) addresses many of the significant issues associated with effects of inlet total-pressure distortion on turbine-engine performance and stability. It provides a review of the development of techniques used to assess engine stability margins in the...

Advertisement