loading
NAS1412 - GASKET, SEALING, CUSTOM DESIGN
June 30, 2015 - AIA/NAS

This document sets forth design considerations for gasket type static seals of custom design, to be used between mating surfaces of parts and/or equipment transmitting or confining liquid or gaseous fluid media.

AND 10201 - SCREENS AND GASKETS - DESIGN REQUIREMENTS FOR CARBURETOR
October 9, 1973 - NPFC
A description is not available for this item.
CRSI DESIGN - CRSI Design Handbook 2008
January 1, 2008 - CRSI

The CRSI Design Handbook has been the reference book for cast-in-place reinforced concrete design since 1952. The 10th edition provides the necessary information needed for common reinforced concrete structural members such as columns, beams, footings, pile caps, retaining walls, and...

MPIF DESIGN MANUAL - Powder Metallurgy Design Manual
January 1, 1998 - MPIF
A description is not available for this item.
AIA DESIGN MANUAL - DESIGN MANUAL ON AIRCRAFT ELECTRICAL INSTALLATIONS
AIA/NAS
A description is not available for this item.
DS/EN 12308 - Installations and equipment for LNG – Suitability testing of gaskets designed for flanged joints used on LNG piping
September 10, 1998 - DS

This standard defines the tests carried out in order to assess the suitability of gaskets designed for flanged joints used on LNG pipes.

ASTM F2836-26 - Standard Practice for Gasket Constants for Bolted Joint Design
June 1, 2026 - ASTM International

1.1 This practice determines room temperature gasket tightness design constants for pressurized bolted flanged connections such as those designed in accordance with the ASME Boiler and Pressure Vessel Code. 1.2 This practice applies mainly to all types of circular gasket...

ASTM F2836-18(2024) - Standard Practice for Gasket Constants for Bolted Joint Design
September 1, 2024 - ASTM International

1.1 This practice determines room temperature gasket tightness design constants for pressurized bolted flanged connections such as those designed in accordance with the ASME Boiler and Pressure Vessel Code. 1.2 This practice applies mainly to all types of circular gasket...

ASTM F2836-18 - Standard Practice for Gasket Constants for Bolted Joint Design
August 1, 2018 - ASTM International

1.1 This practice determines room temperature gasket tightness design constants for pressurized bolted flanged connections such as those designed in accordance with the ASME Boiler and Pressure Vessel Code. 1.2 This practice applies mainly to all types of circular gasket...

PIP VEEVJ001 - Gasket Guidelines
March 1, 2015 - PIP

This Practice describes guidelines for use of gaskets with the following types of flanges a. Standard flanges in accordance with ASME B16.1, B16.5, B16.42, or B16.47 b. Custom flanges designed in accordance with Code, Division 1 Appendix 2 or Division 2, Paragraph 4.16 or Part 5 This...

ASTM F2836 - Standard Practice for Gasket Constants for Bolted Joint Design
August 1, 2018 - ASTM

This practice determines room temperature gasket tightness design constants for pressurized bolted flanged connections such as those designed in accordance with the ASME Boiler and Pressure Vessel Code. This practice applies mainly to all types of circular gasket...

ARP674D - Groove Design, Metal O-Ring Gasket
March 30, 2018 - SAE International

Groove designs presented herein are applicable for use with the following "MS" metal O-ring gaskets conforming to the applicable "AS" standard drawings listed in 1(a) or 1(b), or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 AS9141 - 0.035 tube...

ARP674C - Groove Design, Metal O-Ring Gasket
October 23, 2012 - SAE International

Groove designs presented herein are applicable for use with the following "MS" metal O-ring gaskets conforming to the applicable "AS" standard drawings listed in 1(a) or 1(b), or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 AS9141 - 0.035 tube...

ARP674A - GROOVE DESIGN, METAL O-RING GASKET
June 20, 1988 - SAE International

Groove designs presented herein are applicable for use with the following MS metal o-ring gaskets, or to dimensionally equivalent gaskets of other materials: AMS 5570 or AMS 5576 Plain AMS 5570 or AMS 5576 Silver P1. MS9141 - 0.035 tube x 0.006 wall MS9371 - 0.035 tube x 0.006 wall...

ARP674B - GROOVE DESIGN, METAL O-RING GASKET
January 1, 1998 - SAE International

Groove designs presented herein are applicable for use with the following MS metal O-ring gaskets, or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 MS9141 - 0.035 tube x 0.006 wall 2 MS9142 - 0.062 tube x 0.006 wall 3 MS9202 - 0.062 tube x 0...

Advertisement