loading
ASTM A788/A788M-26a - Standard Specification for Steel Forgings, General Requirements
August 1, 2026 - ASTM International

1.1 This specification covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM A788/A788M-26 - Standard Specification for Steel Forgings, General Requirements
July 1, 2026 - ASTM International

1.1 This specification covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM E569/E569M-26 - Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
May 1, 2026 - ASTM International

This practice provides guidelines for acoustic emission (AE) examination or monitoring of structures, such as pressure vessels, piping systems, or other structures that can be stressed by mechanical or thermal means. The basic functions of an AE monitoring system are to detect, locate, and classify...

ASTM E2551-25 - Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
December 1, 2025 - ASTM International

1.1 These test methods describe the humidity calibration (or conformance) of humidity generators for use with thermogravimetric analyzers and other thermal analysis apparatus. The humidity range covered is 5 % relative humidity (% RH) to 95?% RH and the temperature range is 0 °C to 80 °C. 1...

ASTM D6956-17(2026) - Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
January 1, 2026 - ASTM International

4.1 This guide is intended for use by both generators and users of analytical results. It is intended to promote consistent demonstration and documentation of the quality of the measurement results and facilitate determination of the validity of measurements for their intended use. 4.2 This...

ASTM D5011-17(2026) - Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
January 1, 2026 - ASTM International

1.1 These practices describe means for calibrating ambient, workplace or indoor ozone monitors, using transfer standards. 1.2 These practices describe five types of transfer standards: Practice A-Analytical instruments, Practice B-Boric acid potassium iodide (BAKI) manual analytical procedure,...

ASTM F1134-15(2025) - Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
June 15, 2025 - ASTM International

This specification covers monitoring devices (monitors) for the automatic detection and signaling of low insulation resistance values in idle electrical motors or generators, or both. Monitors are intended for permanent installation in both existing or new panels and controller enclosures...

ASTM F3263-17(2025) - Standard Guide for Packaging Test Method Validation
October 1, 2025 - ASTM International

4.1 Addressing consensus standards with inter-laboratory studies (ILS) and methods specific to an organization. Test methods need to be validated in many cases, in order to be able to rely on the results. This has to be done at the organization performing the tests but is also performed in the...

ASTM D5384-25 - Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
July 1, 2025 - ASTM International

5.1 Chlorinated compounds can lead to corrosion of equipment and poisoning of the catalyst. Chlorinated compounds also present a health hazard when incompletely combusted. Chlorine content of petroleum products is determined prior to their being recycled. Note 1: Federal Regulations mandate that...

ASTM E3379-25a - Standard Guide for Critical Airflow Visualization
August 1, 2025 - ASTM International

1.1 This guide is intended to provide best practices on how to visualize airflow in a critical area and be read in conjunction with relevant International Organization for Standardization (ISO), U.S. Food and Drug Administration (FDA), and EudraLex requirements for airflow visualization. 1.2 In...

ASTM E2534-20(2025) - Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
June 1, 2025 - ASTM International

5.1 PCRT Applications and Capabilities-PCRT has been applied successfully to a wide range of NDT applications in the manufacture and maintenance of metallic and non-metallic parts. Examples of anomalies detected are discussed in 1.1. PCRT has been shown to provide cost effective and accurate NDT...

ASTM E1065/E1065M-20(2025) - Standard Practice for Evaluating Characteristics of Ultrasonic Search Units
June 1, 2025 - ASTM International

1.1 This practice covers measurement procedures for evaluating certain characteristics of ultrasonic search units (also known as "probes") that are used with ultrasonic testing instrumentation. This practice describes means for obtaining performance data that may be used to define the acoustic and...

ASTM E2971-16(2025) - Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
June 1, 2025 - ASTM International

1.1 This test method is intended for quantitative determination of effective boron-10 (10B) areal density (mass per area of 10B, usually measured in grams-10B/cm2 ) in aluminum neutron absorbers. The attenuation of a thermal neutron beam transmitted through an aluminum neutron absorber is compared...

ASTM E3224-25 - Standard Guide for Building Energy Performance and Improvement Evaluation in the Assessment of Property Condition
July 1, 2025 - ASTM International

1.1 Purpose-The purpose of this guide is to define a commercially useful standard in the United States of America for incorporating building energy performance into an assessment of existing property condition, and specifically into a property condition assessment (PCA) on an existing building...

ASTM A788/A788M-25a - Standard Specification for Steel Forgings, General Requirements
May 1, 2025 - ASTM International

1.1 This specification2 covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM A788/A788M-25 - Standard Specification for Steel Forgings, General Requirements
March 1, 2025 - ASTM International

1.1 This specification2 covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM E3213-19(2024) - Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
December 15, 2024 - ASTM International

5.1 PCRT Applications and Capabilities-PCRT PTI examination has been applied successfully to a wide range of parts in manufacturing and maintenance environments. Examples of manufacturing processes, repair processes, and in-service damage mechanisms evaluated with PTI are discussed in 1.1. PCRT has...

ASTM E3379-25 - Standard Guide for Critical Airflow Visualization
January 15, 2025 - ASTM International

1.1 This guide is intended to provide best practices on how to visualize airflow in a critical area and be read in conjunction with relevant International Organization for Standardization (ISO), U.S. Food and Drug Administration (FDA), and EudraLex requirements for airflow visualization. 1.2 In...

ASTM A788/A788M-24a - Standard Specification for Steel Forgings, General Requirements
October 15, 2024 - ASTM International

1.1 This specification2 covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...

ASTM A531/A531M-24 - Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
May 1, 2024 - ASTM International

1.1 This practice covers ultrasonic examination of turbine-generator retaining rings produced in accordance with Specifications A288 and A289/A289M with an inside diameter to wall thickness ratio equal to or greater than 5:1 and with wall thicknesses from 1?in. to 4 in. [25?mm to 102 mm]. 1...

Advertisement