loading
GREEN VEGETABLE OIL PROCE - GREEN VEGETABLE OIL PROCESSING
AOCS
A description is not available for this item.
IEEE GREEN BOOK - GROUNDING OF INDUSTRIAL & COMMERCIAL PWR.SYSTEMS
IEEE
A description is not available for this item.
ISO STD THE GREEN ECONOMY - ISO STANDARDS AND THE GREEN ECONOMY
ISO
A description is not available for this item.
ASTM D6746-15(2026) - Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
April 1, 2026 - ASTM International

5.1 The stress-strain properties of unvulcanized rubber (either in a compound or in the raw state) are important to certain processing operations in the rubber industry. These unvulcanized rubber properties are frequently referred to as "green strength." 5.2 Green strength is...

ASTM D3021-01(2025) - Standard Specification for Phthalocyanine Green Pigments
July 1, 2025 - ASTM International

1.1 This specification covers chlorinated and chlorinated-brominated copper phthalocyanine green pigments in dry powder form, for use in paints, printing inks, and related products. A variety of commercial types are available to meet the requirements of different end uses. 1.2 The values...

ASTM B312-25 - Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
September 1, 2025 - ASTM International

1.1 This standard covers a test method that may be used to measure the transverse rupture strength of a compacted but unsintered (green) test specimen produced from lubricated or unlubricated metal powders or powder mixtures. 1.2 Green strength is measured by a quantitative laboratory...

ASTM D8152-26 - Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
February 15, 2026 - ASTM International

5.1 This practice shall only be used on soils having infiltration rates ranging from 2.5 mm/h (field hydraulic conductivity of 6.9?×?10-7 m/s) to 15000 mm/h (field hydraulic conductivity of 4.0?×?10-3 m/s). 5.2 This practice is useful for field measurement of the infiltration rate and calculation...

ASTM D4968-25a - Standard Practice for Review of Test Methods and Specifications for Plastics
December 1, 2025 - ASTM International

1.1 This practice is intended to assist the subcommittees and sections of Committee D20 on Plastics with the process of standards evaluation during the five-year review mandated by ASTM or when changes to test methods and specifications are required. It is intended to complement the Form and Style...

ASTM E708-25 - Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
October 1, 2025 - ASTM International

This specification covers particulate glass (cullet material) recovered from waste destined for disposal, smaller than 6 mm intended for reuse as a raw material in the manufacture of glass containers. Flint glass cullet is a particulate glass material that contains no more than 0.1 weight % Fe2O3,...

ASTM F3803-26 - Standard Guide for Applying Goods Movement Process Codes in Common Approaches to Transport Management
January 1, 2026 - ASTM International

5.1 This section elaborates how the GMPC may be used in the context of the two main approaches to managing the execution of transportation mentioned in 4.8. These elaborations do not go into every possible detail of these approaches. The purpose of the elaborations is to provide an outline of the...

ASTM F3804-26 - Standard Practice for Applying a Goods Movement Process Code as Suffix to the ISO Transport Unit Identifier
January 1, 2026 - ASTM International

5.1 This section elaborates how the GMPC may be used in the context of the two main approaches to managing the execution of transportation mentioned in 5.2. These elaborations do not go into every possible detail of these approaches. The purpose of the elaborations is to provide an outline of the...

ASTM D8093-25 - Standard Guide for Nondestructive Evaluation of Nuclear Grade Graphite
November 1, 2025 - ASTM International

5.1 Nuclear grade graphite is a composite material made from petroleum or a coal-tar-based coke and a pitch binder. Manufacturing graphite is an iterative process of baking and pitch impregnation of a formed billet prior to final graphitization, which occurs at temperatures greater than 2500?°C....

ASTM D3900-17(2025) - Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
September 1, 2025 - ASTM International

4.1 These test methods can be used for determining which EPDM polymers are evaluated in the different compounds in Test Methods D3568. 4.2 Differences in ethylene sequence distribution cause differences in crystallinity and green strength at the same ethylene content. Since these are...

ASTM D351-18(2025) - Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
September 1, 2025 - ASTM International

1.1 This classification covers the determination of commercially available natural muscovite block mica and is intended to be independent of the basic color of the mica or its source. 1.2 Muscovite mica is characterized by having an optical axial angle between 50 and 75° (see Appendix X1); and has...

ASTM D7851-25 - Standard Guide for Design of Sustainable, Low-Slope Roofing Systems
September 1, 2025 - ASTM International

1.1 This guide provides guidance and considerations related to designing sustainable low-sloped roofing systems, including exposed membrane roofs, membranes covered with landscaped and vegetative (green) overburden systems, ballasted roofs, and protected membrane roofing assemblies. A...

ASTM D8014-17(2025) - Standard Guide for Selection of Membranes Used in Vegetative Roofing Systems
July 1, 2025 - ASTM International

4.1 This guide provides the general information, procedures, and guidelines for the selection of the waterproofing membrane to create a waterproofing system for a vegetative (green) roof. 4.2 This guide is not all inclusive; this guide is intended to supplement detailed instructions from...

ASTM E3153-25 - Standard Practice for Development of Multi-attribute Sustainability Standards for Building Products
July 1, 2025 - ASTM International

4.1 Several industry-developed standards and specifications exist, or are being developed for characterizing building products, based on a range of environmental and social threshold criteria for products throughout different life-cycle stages of production, construction, use, and end of life....

ASTM D4968-25 - Standard Practice for Annual Review of Test Methods and Specifications for Plastics
July 1, 2025 - ASTM International

1.1 This practice is intended to assist the subcommittees and sections of Committee D20 on Plastics with the process of standards evaluation during the five-year review mandated by ASTM or when changes to test methods and specifications are required. It is intended to complement the Form and Style...

Advertisement