loading
API REPORT GROUND MOTION - Ground Motion Intensity Factors and Acceleration Response Spectra Ninth Edition API RP 2A Earthquake Design Provisions Eastern Gulf of Alaska Region
November 1, 1978 - API

PERSPECTIVE This report documents a study of earthquake design criteria for the eastern Gulf of Alaska. This study backgrounded a portion of the development of the Ninth Edition of API RP 2A's Section 2.10 earthquake design guideline effective ground acceleration and response spectra. This...

ANSI/NEMA GR 1 - Ground Rod Electrodes and Ground Rod Electrode Couplings
January 1, 2017 - NEMA

This standards publication applies to ground rod electrodes and ground rod electrode couplings that function in accordance with the National Electrical Code® (NFPA 70-2014) and/or the National Electrical Safety Code (ANSI C2-2012). Included are materials, construction,...

ASTM B737-10(2026) - Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
July 1, 2026 - ASTM International

1.1 This specification covers hot- or cold-worked hafnium rod and wire. 1.2 This specification contains two material grades, one specifically for nuclear applications (Grade R1) and one for commercial alloying applications (Grade R3). 1.3 The products covered include the following: 1.3.1...

NEMA PH 30 - GALVANIZED FERROUS GROUND RODS
January 1, 1971 - NEMA
A description is not available for this item.
ASTM B335-25 - Standard Specification for Nickel-Molybdenum Alloy Rod
April 15, 2025 - ASTM International

1.1 This specification2 covers rod of nickel-molybdenum alloys (UNS N10001, N10665, N10675, N10629, and N10624)3 as shown in Table 1, for use in general corrosive service. 1.2 The following products are covered under this specification: 1.2.1 Rods 5/16 in. to 3/4 in. (7.94?mm to 19.05...

ASTM D6067/D6067M-25 - Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity
December 1, 2025 - ASTM International

4.1 Environmental site characterization projects almost always require information regarding subsurface soil stratigraphy and hydraulic parameters related to groundwater flow rate and direction. Soil stratigraphy often is determined by various drilling procedures and interpreting the data collected...

ANSI C135.30 - Zinc-Coated Ferrous Ground Rods for Overhead or Underground Line Construction
January 1, 1988 - IEEE

This standard covers zinc-coated ferrous ground rods used in overhead or underground line construction, or both.

ASTM F90-24 - Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
October 15, 2024 - ASTM International

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought cobalt-20chromium-15tungsten-10nickel alloy used for surgical implants. The properties specified apply specifically to wrought bar, rod, wire, sheet, and strip, but do not apply to surgical...

ASTM B574-23 - Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
November 1, 2023 - ASTM International

1.1 This specification2 covers rod and bar of low-carbon nickel-chromium-molybdenum alloys (UNS N10276, N06022, N06035, N06044, N06455, N06058, and N06059), low-carbon nickel-molybdenum-chromium (USN N10362), low-carbon nickel-molybdenum-chromium-tantalum (UNS N06210), low-carbon...

ASTM D6724/D6724M-16(2024)e1 - Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
March 15, 2024 - ASTM International

5.1 The direct push ground method is a rapid and economical procedure for installing groundwater monitoring wells to obtain representative groundwater samples and location-specific hydrogeologic measurements. Direct push installations may offer an advantage over conventional rotary drilled...

W-R-550 - ROD,GROUND(WITH ATTACHMENTS)
NPFC
A description is not available for this item.
ASTM B581-17(2023) - Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
April 1, 2023 - ASTM International

This specification covers nickel-chromium-iron-molybdenum-copper alloy rods (UNS N06007, N06975, N06985, N06030, and N08031), hot- or cold-finished, solution annealed, ground, or turned, for use in general corrosive service. Heat and product (check) analysis of the alloy shall conform...

ASTM E1364-95(2023) - Standard Test Method for Measuring Road Roughness by Static Level Method
December 1, 2023 - ASTM International

1.1 This test method covers the measurement of a longitudinal profile of a travelled surface using a static level for the purpose of obtaining a road roughness index. This test method is suitable for all surface types that are travelled by conventional ground vehicles, including paved and...

ASTM D6951/D6951M-18(2023) - Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
August 1, 2023 - ASTM International

1.1 This test method covers the measurement of the penetration rate of the dynamic cone penetrometer with an 8 kg [17.6 lb] hammer (8 kg [17.6 lb] DCP) through undisturbed soil or compacted materials, or both. The penetration rate may be related to in situ strength such as an estimated in situ CBR...

ASTM B351/B351M-13(2023) - Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
May 1, 2023 - ASTM International

1.1 This specification covers four grades of wrought zirconium and zirconium alloy bars, rod, and wire as follows: 1.1.1 R60001-Unalloyed grade, 1.1.2 R60802-Zirconium-Tin alloy (Zircaloy 2), 1.1.3 R60804-Zirconium-Tin alloy (Zircaloy 4), and 1.1.4 R60901-Zirconium-Niobium alloy. 1.2 Unless...

ASTM F90-23 - Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
April 1, 2023 - ASTM International

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought cobalt-20chromium-15tungsten-10nickel alloy used for surgical implants. The properties specified apply specifically to wrought bar, rod, wire, sheet, and strip, but do not apply to surgical...

AMS4958F - Titanium Alloy, Bars and Rods 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Centerless Ground or Peeled and Polished
November 2, 2022 - SAE International

This specification covers a titanium alloy in the form of bars and rods 1.00 inch (25.4 mm) and under in nominal diameter.

ASTM C833-23 - Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors
June 1, 2023 - ASTM International

1.1 This specification covers finished sintered and ground (U, Pu)O2 pellets for use in light water reactors. It applies to (U, Pu)O2 pellets containing a plutonium mass fraction up to 15?% (that is, mass of Pu divided by the sum of masses U, Pu, and Am yielding 0.15 or less). 1.2 Pellets...

Advertisement