loading
IEEE INFORMATION - INFORMATION GRAPHICS: A COMPRHENSIVE ILLUSTRATED REFERENCE
IEEE
A description is not available for this item.
AIHA HEALTH & SAFETY - DIRECTORY OF HEALTH & SAFETY SOFTWARE (DISKETTE)
AIHA
A description is not available for this item.
HEALTH AND SAFETY - MANAGEMENT OF HEALTH AND SAFETY AT WORK: HMSO
TI/UK
A description is not available for this item.
IEEE INFORMATION THEORY: - INFORMATION THEROY: 50 YEARS OF DISCOVERY
IEEE
A description is not available for this item.
TIA HEALTHCARE SET - TIA HEALTHCARE SET OF 6 TIA STANDARDS. *** YOU SAVE 30% WHEN PURCHASING AS A SET ***
TIA

This focused set of Standards enables the planning and installation of a structured data/phone cabling system for healthcare facilities and those parts of networks in health care spaces. Supporting Standards for pathways & spaces, administration, bonding & grounding, and building automation...

ISO TR 20055 - Health informatics - Personowned document repository for PHR applications and health information exchange
August 1, 2018 - ISO

This document describes the concept of a person-owned repository (PoR) of health documents. It suggests representative uses for PoRs and surveys some of the existing technologies and projects that can be categorized as PoRs. It is, however, not intended to cover document formats (such as HL7...

DS/ISO/TR 20055 - Health informatics – Person-owned document repository for PHR applications and health information exchange
July 31, 2018 - DS

This document describes the concept of a person-owned repository (PoR) of health documents. It suggests representative uses for PoRs and surveys some of the existing technologies and projects that can be categorized as PoRs. It is, however, not intended to cover document formats (such as HL7...

JA6268_202303 - Design & Run-Time Information Exchange for Health-Ready Components
March 14, 2023 - SAE International

This Surface Vehicle & Aerospace Recommended Practice offers best practices and a methodology by which IVHM functionality relating to components and subsystems should be integrated into vehicle or platform level applications. The intent of the document is to provide practitioners with a structured...

ASTM B163-26 - Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
July 1, 2026 - ASTM International

This specification covers seamless tubes of nickel and nickel alloy for use in condenser and heat-exchanger service. This covers outside diameter and average wall, or outside diameter and minimum wall tube. Tube shall be furnished in the alloys and conditions defined by this specification....

ASTM D3087-26 - Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
January 1, 2026 - ASTM International

5.1 This test method can be used for evaluating performance of commercially available anion-exchange materials regardless of the basic strength of the ion exchange groups. When previous operating history is known, a good interpretation of resin fouling or malfunction can be obtained...

ASTM D4266-17(2026)e1 - Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
January 1, 2026 - ASTM International

1.1 These test methods cover the determination of the operating ion-exchange capacity of both powdered cation-exchange resins (hydrogen form) and powdered anion-exchange resins (hydroxide form). These test methods are intended for use in testing new powdered ion-exchange...

ASTM D5042-26 - Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins
January 1, 2026 - ASTM International

1.1 This test method provides a general estimate of the organic fouling of an anion exchange resin based upon total organic carbon measurements. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard...

ASTM D4456-17(2026)e1 - Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
January 1, 2026 - ASTM International

7.1 The particle size distribution of powdered ion exchange resins and, more importantly, the derived parameters of mean particle size and percent above and below specified size limits are useful for determining batch to batch variations and, in some cases, can be related to certain aspects...

ASTM D1782-26 - Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
January 1, 2026 - ASTM International

9.1 Cation exchange materials are frequently used in the sodium form to exchange divalent and trivalent ions in the influent water for sodium ions on the resin sites. This process is commonly referred to as softening water since it removes those ions that form a "hard" curd of...

ASTM B872-26 - Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
April 1, 2026 - ASTM International

1.1 This specification covers rolled precipitation hardenable nickel-iron-chromium-niobium-titanium-aluminum alloy (N09908), nickel-chromium-molybdenum-copper-titanium-niobium alloy (N09925), nickel-chromium-molybdenum-niobium-titanium alloy (N07725) and nickel-chromium-cobalt-titanium-niobium...

ASTM B626-26 - Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
April 1, 2026 - ASTM International

This specification covers welded tubes made from nickel and nickel-cobalt alloys with UNS Nos. N10001, N10242, N10665, N12160, N10629, N10624, N10675, N10276, N06455, N06007, N06975, N08320, N06985, N06002, N06022, N06030, N06035, N06058, N06059, N06200, N06210, N08031, R30556, N06230, N06686, and...

ASTM E2847-21(2026) - Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
April 1, 2026 - ASTM International

1.1 This test method covers electronic instruments intended for measurement of temperature by detecting the intensity of thermal radiation exchanged between the subject of measurement and the sensor. 1.2 The devices covered by this test method are referred to as infrared thermometers in this...

Advertisement