loading
ISO HL7 16527 - Health informatics - HL7 Personal Health Record System Functional Model, Release 1 (PHRS FM)
April 1, 2016 - ISO

The HL7 PHR-S FM defines a standardized model of the functions that may be present in PHR Systems. It is beyond the scope of the PHR system to control the use (or intended use) of PHR data. On the contrary, it is within the scope of the PHR system to manage the authorization of an individual...

DS/ISO/HL7 27931 CD-ROM - Health informatics - HL7 Messaging Standard Version 2.5 - An application protocol for electronic data exchange in healthcare environments
July 6, 2009 - DS

This document contains the specifications for Version 2.5 of the Health Level Seven (HL7) Standard for electronic data exchange in all healthcare environments, with special emphasis on inpatient acute care facilities (i.e., hospitals). It summarizes the work of a committee of healthcare...

SAA TR 2966 - STANDARDIZATION OF HIERARCHIC DESIGNATORS IN HL7 MESSAGING
SAI
A description is not available for this item.
ITU-T H.836 - Conformance of ITU-T H.810 personal health devices: WAN interface Part 6: PCD-01 HL7 messages: Receiver
January 1, 2015 - ITU-T

The scope of this Recommendation1 is to provide a test suite structure and the test purposes (TSS & TP) for the WAN interface based on the requirements defined in the Continua Design Guidelines (CDG) [ITU-T H.810]. The objective of this test specification is to provide a high probability of air...

ITU-T H.835 - Conformance of ITU-T H.810 personal health devices: WAN interface Part 5: PCD-01 HL7 messages: Sender
January 1, 2015 - ITU-T

The scope of this Recommendation1 is to provide a test suite structure and the test purposes (TSS & TP) for the WAN interface based on the requirements defined in the Continua Design Guidelines (CDG) [ITU-T H.810]. The objective of this test specification is to provide a high probability of air...

ASTM D7-27 - Test Method for Sieve Analysis of Fine and Aggregates (Withdrawn 1938)
January 1, 2027 - ASTM International
A description is not available for this item.
ITU-T H.830.5 - Conformance of ITU-T H.810 personal health system: Services interface Part 5: PCD-01 HL7 messages: Health & Fitness Service sender
April 1, 2017 - ITU-T

The scope of this Recommendation1 is to provide a test suite structure (TSS) and the test purposes (TP) for the Services interface based on the requirements defined in the Continua Design Guidelines (CDG) [ITU-T H.810 (2016)]. The objective of this test specification is to provide a high...

ITU-T H.830.6 - Conformance of ITU-T H.810 personal health system: Services interface Part 6: PCD-01 HL7 messages: Health & Fitness Service receiver
April 1, 2017 - ITU-T

The scope of this Recommendation1 is to provide a test suite structure (TSS) and the test purposes (TP) for the Services interface based on the requirements defined in the Continua Design Guidelines (CDG) [ITU-T H.810 (2016)]. The objective of this test specification is to provide a high...

ASTM D4833/D4833M-07(2026) - Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
June 1, 2026 - ASTM International

5.1 This test method is an index test for determining the puncture resistance of geomembranes and related products. The use of this test method is to establish an index value by providing standard criteria and a basis for uniform reporting. 5.2 This test method is considered satisfactory for...

ASTM C315-07(2026) - Standard Specification for Clay Flue Liners and Chimney Pots
May 1, 2026 - ASTM International

1.1 This specification establishes the criteria for acceptance, prior to installation, of clay flue liners and chimney pots used for conveying hot gases in masonry chimneys. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical...

ASTM A764-07(2026) - Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
April 1, 2026 - ASTM International

1.1 This specification covers two finishes of round, metallic coated, hard-drawn, carbon steel spring wire having properties and quality for the manufacture of mechanical springs and wire forms that are not subject to high stress or require high fatigue properties. 1.2 The values stated in...

ASTM D3186-07(2026) - Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
April 1, 2026 - ASTM International

3.1 These test methods are intended mainly for referee purposes but may be used for quality control of masterbatch production. They may also be used in research and development work and for comparison of different rubber samples in a standard formula. 3.2 These test methods may also be used to...

ASTM D3403-07(2026) - Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)
April 1, 2026 - ASTM International

3.1 These tests are mainly intended for referee purposes but may be used for quality control of rubber production. They may also be used in research and development work and for comparison of different rubber samples in a standard formula. 3.2 These tests may also be used to obtain values for...

ASTM D3896-07(2026) - Standard Practice for Rubber From Synthetic Sources—Sampling
April 1, 2026 - ASTM International

3.1 The sampling plan is intended for referee purposes only in establishing the properties or quality of a lot or shipment of synthetic rubber.

ASTM D1485-07(2026) - Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation
April 1, 2026 - ASTM International

3.1 This practice outlines a procedure for sampling and sample preparation of natural rubber. A statistical method for determining a quality index and lot acceptability is given. The sampling plan is optional for quality control or production, but may be used when needed for referee purposes.

ASTM D2066-07(2026) - Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
March 1, 2026 - ASTM International

5.1 Tinting strength is an essential property of printing ink dispersions. Although test results on wet drawdowns and tints do not guarantee equivalency of dry printed ink films, they provide useful parameters for quality assurance of established formulations, gauging relative degree of dispersion,...

ASTM D6687-07(2026) - Standard Guide for Testing Printing Ink Vehicles and Components Thereof
March 1, 2026 - ASTM International

1.1 This guide covers a list of test methods, practices, guides, and specifications that can be used for the testing and evaluation of printing ink vehicles and components thereof (see Table 1). 1.2 This guide includes methods that were developed to test impact and non-impact inks and vehicles...

ASTM D7381-07(2026) - Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material
March 1, 2026 - ASTM International

4.1 This practice is primarily intended for use by associations, third-party grading agencies, technical societies and other groups that develop national design standards and use recommendations for round timber piles. 4.2 This practice provides procedures for establishing compression parallel to...

ASTM F2141-07(2026) - Standard Test Method for Performance of Self-Serve Hot Deli Cases
March 1, 2026 - ASTM International

5.1 The energy input rate is used to confirm that the deli case is operating properly prior to further testing. 5.2 Holding temperature range is useful for food service operators in selecting a unit that matches their holding requirements. 5.3 Capacity is used by food service operators to choose a...

Advertisement