This standard describes a functional specification of the Host Controller Interface (HCI) for Universal Flash Storage (UFS). The objective of UFSHCI is to provide a uniform interface method of accessing the UFS hardware capabilities so that a standard/common Driver can...
This document provides a comprehensive definition of the requirements for implementation of a UFS Host Controller, which supports the optional Unified Memory extension.
This International Standard specifies a flexible disk cartridge drive and defines the necessary functional and electrical requirements (including logic signals) and the mechanical requirements of the interface for the connection of conforming flexible disk drives to a host system.
Specifies and defines the necessary functional and electrical requirements (including logic signals) and the mechanical requirements of the interface for the connection of conforming flexible disk drives to a host system. Includes drives using media specified in many standards but...
An NVDIMM-P device is defined as a LRDIMM memory module which provides host controller access to DRAM and/or other memory devices such as persistent memory. In order to enable access to media that may have non-deterministic access latencies, and/or on-board media management...
The host-base storage portion of the Storage Management Technical Specification defines management profiles for autonomous, component and abstract profiles for management of host-based storage devices. The autonomous profiles describe the management of a stand-alone host-based...
This part of ISO/IEC 24775 defines management profiles for autonomous, component and abstract profiles for management of host-based storage devices. The autonomous profiles describe the management of a stand-alone host-based storage entity. The component profiles (or subprofiles)...
The host-base storage portion of the Storage Management Technical Specification defines management profiles for autonomous, component and abstract profiles for management of host-based storage devices. The autonomous profiles describe the management of a stand-alone host-based...
This document defines new options to discover the Broadcast and Multicast Service (BCMCS) controller in an IP network. BCMCS is being developed for Third generation (3G) cellular telephone networks. Users of the service interact with a controller in the network via the Mobile Node...
This standard defines the data interfaces between a host aircraft ("platform") and an Electro-Optic/Infrar
This standard defines the data interfaces between a host aircraft ("platform") and an Electro-Optic/Infrar
NTCIP 1202 v03 specifies the logical interface between an Actuated Signal Controller (ASC) and the host systems that control them. NTCIP 1202 v03 describes the supported ASC functionality in terms of user needs and requirements; however, the nature of the interface is...
This part of ISO/IEC 9318 describes the logical level (generic level) interface for tape drives and it provides a definition of the device-generic portion of a family of standards called the Intelligent Peripheral Interface (IPI). The purpose of this standard is to facilitate the...
This part of ISO/IEC 9318 describes the logical level (generic level) interface for tape drives and it provides a definition of the device-generic portion of a family of standards called the Intelligent Peripheral Interface (IPI). The purpose of this standard is to facilitate the...
Discover over 70 real-world examples to overcome the most complex concepts you will face developing with Visualforce About This Book • This book provides an enhanced user experience with dynamically-generate
This standard defines the mechanical, electrical, timing, and protocol requirements of the SCSI parallel interface to allow conforming SCSI devices to inter-operate. The SCSI parallel interface is a local I/O bus that may be operated over a wide range of transfer rates. The objectives...
The stimulus analogue line package defines ITU-T H.248 signals and events that are exchanged between a media gateway (MG) and a media gateway controller (MGC) for controlling analogue plain old telephone service (POTS) lines which can, for example, be used to host telephones, analogue...
Narrow Your Results