loading
HYDRAULICS - HYDRAULICS OF PIPELINES: PUMPS, VALVES, CAVITATION, TRANSLENTS
HI/HYDRAUL
A description is not available for this item.
JIS HYDRAULIC & PNEUMATIC - JIS Hydraulic and Pneumatic Equipments Handbook
January 1, 2019 - JSA
A description is not available for this item.
ASTM C1708/C1708M-26 - Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
June 1, 2026 - ASTM International

1.1 These test methods are appropriate to evaluate the performance of self-leveling mortars containing hydraulic cements that are used to improve the levelness, smoothness, and flatness of existing floors. These materials may be used as an underlayment to receive floor finishes, or as an...

ASTM D7853-13(2026) - Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
June 1, 2026 - ASTM International

5.1 Due to hydraulic pressure that may be present on some applications, engineers need to understand the capability of these products to resist this pressure. This test allows engineers to compare products and verify pullout strength. 5.2 Hydraulic pullout resistance is a function of...

ASTM C109/C109M-26a - Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50 mm [2 in.] Cube Specimens)
June 15, 2026 - ASTM International

5.1 This test method provides a means of determining the compressive strength of hydraulic cement and other mortars and results may be used to determine compliance with specifications. Further, this test method is referenced by numerous other specifications and test methods. Caution must be...

ASTM D2070-26 - Standard Test Method for Thermal Stability of Hydraulic Oils
May 1, 2026 - ASTM International

1.1 This test method is designed primarily to evaluate the thermal stability of hydrocarbon based hydraulic oils although oxidation may occur during the test. 1.2 The values stated in SI units are to be regarded as standard. 1.3 This standard does not purport to address all of the safety...

ASTM C1933/C1933M-26 - Standard Test Methods for Floor Patching and Skim Coating Compounds Containing Hydraulic Cements
June 1, 2026 - ASTM International

1.1 These test methods are appropriate to evaluate the performance of floor patching compounds containing hydraulic cements that are used to improve the levelness, smoothness, and flatness of existing floors. These materials may be used as an underlayment to receive floor finishes. The...

ASTM C188-26 - Standard Test Method for Density and Relative Density of Hydraulic Cement
May 1, 2026 - ASTM International

4.1 This test method provides a procedure for the determination of density of hydraulic cement samples using non-instrumental techniques. 4.2 Relative density is used to calculate the volume occupied by hydraulic cement in various mixtures containing hydraulic cement. This is...

ASTM C430-26 - Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
June 1, 2026 - ASTM International

This test method covers hydraulic cement fineness tests performed using a sieve. The sieve frame should be made of a circular metal matching the specified dimensions, fitted with either a stainless steel woven-wire sieve cloth or an electroformed forced nickel sieve sheet. Both the nozzle...

ASTM C1679-26 - Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
June 1, 2026 - ASTM International

1.1 This practice describes the apparatus and procedure for measuring relative differences in hydration kinetics of hydraulic cementitious mixtures, either in paste or mortar (see Note 1), including those containing admixtures, various supplementary cementitious materials (SCM), and other...

ASTM D8112-26 - Standard Guide for Sampling, In-Service Lubricating Oils and Hydraulic Fluids in Industrial Applications
May 1, 2026 - ASTM International

5.1 Analyzing in-service lubricating oil and hydraulic fluid samples is crucial for assessing the condition of both the fluid and the equipment. The results of the fluid analysis guide the planning of any necessary corrective maintenance activities. 5.2 The objective of this guide is to...

ASTM E2256-26 - Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service
May 1, 2026 - ASTM International

1.1 This guide is intended to provide the reader with a knowledge of construction examination procedures and current technologies that can be used to give an owner or operator of an aboveground storage tank (AST) in petroleum service, relevant information on the hydraulic integrity of a new,...

ASTM D7752-26 - Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
March 1, 2026 - ASTM International

5.1 Hydraulic fluid compatibility is important to hydraulic equipment users because a mixture of incompatible fluids may produce a substance that is markedly inferior to its constituents. Even in identical base stocks, the formation of a precipitate may occur as a result of additive...

ASTM C129-26 - Standard Specification for Dry-Cast Nonloadbearing Concrete Masonry Units
July 15, 2026 - ASTM International

1.1 This specification covers dry-cast hollow and solid nonloadbearing concrete masonry units machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. These units are intended for use in nonloadbearing partitions, but under...

ASTM D7483-26 - Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
July 1, 2026 - ASTM International

5.1 Many petroleum products, as well as non-petroleum materials, are used as lubricants for bearings, gears, compressor cylinders, hydraulic equipment, etc. Proper operation of this equipment depends upon the viscosity of these liquids. 5.2 Oscillating piston viscometers allow viscosity...

ASTM C778-26 - Standard Specification for Standard Sand
July 1, 2026 - ASTM International

1.1 This specification covers standard sand for use in the testing of hydraulic cements. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 Values in SI units shall be obtained by measurement in SI units or by appropriate conversion, using the Rules for Conversion and...

ASTM C1702-26 - Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
May 1, 2026 - ASTM International

5.1 This method is suitable for determining the total heat of hydration of hydraulic cement at constant temperature at ages up to 7 days to confirm specification compliance. 5.2 This method compliments Practice C1679 by providing details of calorimeter equipment, calibration, and operation....

ASTM D3427-26 - Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
June 1, 2026 - ASTM International

1.1 This test method covers the ability of turbine, hydraulic, and gear oils to separate entrained air. Note 1: This test method was developed for hydrocarbon based oils. It may be used for some synthetic fluids; however, the precision statement applies only to hydrocarbon based oils. 1.2...

ASTM C1623-26 - Standard Specification for Solid Dry-Cast Manufactured Concrete Masonry Lintels
June 1, 2026 - ASTM International

1.1 This specification covers dry-cast concrete masonry lintels (beams) that are solid in cross-section, are reinforced for flexure, and are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. These lintels are suitable...

ASTM C109/C109M-26 - Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50 mm [2 in.] Cube Specimens)
April 1, 2026 - ASTM International

5.1 This test method provides a means of determining the compressive strength of hydraulic cement and other mortars and results may be used to determine compliance with specifications. Further, this test method is referenced by numerous other specifications and test methods. Caution must be...

Advertisement