loading
ASTM D1250-25 - Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1
December 15, 2025 - ASTM International

5.1 The expanded limits of the Adjunct for VCF are defined in a mixture of terms of customary and metric units. Table 1 shows the defining limits and their associated units in bold italics. Also shown in Table 1 are the limits converted to their equivalent units (and, in the case of the densities,...

ASTM D6822-25 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
December 1, 2025 - ASTM International

5.1 Accurate determination of the density, relative density, or API gravity of petroleum and its products is necessary for the conversion of measured volumes to volumes or masses, or both, at the standard reference temperatures of 15?°C or (60?°F) during custody transfer. 5.2 This procedure is most...

ASTM D3142/D3142M-25 - Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
June 1, 2025 - ASTM International

1.1 This test method covers the laboratory determination, using a glass hydrometer, of the density, specific gravity, or API gravity of cutback asphalts as defined in Specifications D2026/D2026M, D2027/D2027M, and D2028/D2028M (Note 1). Values are measured on a hydrometer at...

ASTM D2111-10(2025) - Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures
August 1, 2025 - ASTM International

1.1 These test methods cover the determination of the specific gravity of halogenated organic solvents and solvent admixtures. They define suitable apparatus and procedures and furnish details underlying the interpretation of test data and the selection of numerical limits for agreement among...

ASTM D4659-25 - Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
July 1, 2025 - ASTM International

1.1 These test methods determine the specific gravity of toluenediisocyanate, polymeric (methylene phenylisocyanate), and liquid methylene di(phenylisocyanate). These test methods also are applicable to many other liquids. (See Note 1.) 1.1.1 Test Method A-Specific gravity by pycnometer, for...

ASTM D4441-20(2025) - Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
July 1, 2025 - ASTM International

This specification establishes the properties and test methods for aqueous dispersions of polytetrafluoroethylene (PTFE) resins, and is used to determine if a shipment, lot, or container of PTFE dispersions is suitable for its intended use. These resins are homopolymers of tetrafluoroethylene, or...

ASTM D891-25 - Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
May 1, 2025 - ASTM International

1.1 These test methods cover the determination of the specific gravity, apparent, of liquid industrial chemicals. Two test methods are covered as follows: 1.1.1 Test Method A, specific gravity, apparent, by means of a hydrometer. 1.1.2 Test Method B, specific gravity, apparent, by means of a...

ASTM D1298-24 - Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
November 1, 2024 - ASTM International

1.1 This test method covers the laboratory determination using a glass hydrometer in conjunction with a series of calculations, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures of petroleum and nonpetroleum products normally handled as...

ASTM D4221-25 - Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
March 15, 2025 - ASTM International

5.1 Dispersive clays are those which normally deflocculate when exposed to water of low-salt concentration, the opposite of aggregated clays that would remain flocculated in the same soil-water system (3, 4, 7). Generally, dispersive clays are highly erosive, possibly subject to high shrink-swell...

ASTM D891-24 - Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
August 1, 2024 - ASTM International

1.1 These test methods cover the determination of the specific gravity, apparent, of liquid industrial chemicals. Two test methods are covered as follows: 1.1.1 Test Method A, specific gravity, apparent, by means of a hydrometer. 1.1.2 Test Method B, specific gravity, apparent, by means of a...

ASTM D6822-24 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
July 1, 2024 - ASTM International

5.1 Accurate determination of the density, relative density, or API gravity of petroleum and its products is necessary for the conversion of measured volumes to volumes or masses, or both, at the standard reference temperatures of 15?°C or (60?°F) during custody transfer. 5.2 This procedure is most...

ASTM E100-19(2024) - Standard Specification for ASTM Hydrometers
May 1, 2024 - ASTM International

This specification covers glass hydrometers of various scale graduation systems, as required by the ASTM test methods in which they are used. Hydrometers shall be of the constant-mass, variable-displacement type. Hydrometers shall be made of glass, except for the scale,...

ASTM E126-19(2024) - Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
May 1, 2024 - ASTM International

1.1 This test method describes the principles, apparatus, and procedures for the inspection, calibration, and verification of ASTM glass hydrometers. This test method is applicable to ASTM hydrometers and may be used for other general hydrometers of the constant-mass,...

ASTM D7777-24 - Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
July 1, 2024 - ASTM International

1.1 This test method covers the determination of the density, relative density, or API gravity of liquid petroleum products using portable digital density meters at test temperatures between 0?°C and 40?°C (32?°F to 104?°F). Its application is restricted to samples with a dry vapor pressure...

ASTM C494/C494M-24 - Standard Specification for Chemical Admixtures for Concrete
June 15, 2024 - ASTM International

This specification covers the materials and the test methods for use in chemical admixtures to be added to hydraulic-cement concrete mixtures in the field. The seven types of admixtures are indicated as follows: Type A-water reducing; Type B-retarding; Type C-accelerating; Type D-water reducing and...

ASTM D6822-23 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
December 1, 2023 - ASTM International

5.1 Density and API gravity are used in custody transfer quantity calculations and to satisfy transportation, storage, and regulatory requirements. Accurate determination of density or API gravity of crude petroleum and liquid petroleum products is necessary for the conversion of measured volumes...

ASTM D287-22 - Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
December 1, 2022 - ASTM International

1.1 This test method covers the determination by means of a glass hydrometer in conjunction with a series of calculations of the API gravity of crude petroleum and petroleum products normally handled as liquids and having a Reid vapor pressure (Test Method D323) of 14.696 psi (101.325?kPa)...

ASTM D1657-22 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
July 1, 2022 - ASTM International

1.1 This test method covers the determination of the density or relative density of light hydrocarbons including liquefied petroleum gases (LPG) having Reid vapor pressures exceeding 101.325?kPa (14.696?psi). 1.2 The prescribed apparatus should not be used for materials having vapor pressures...

ASTM D1657-22e1 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
July 1, 2022 - ASTM International

1.1 This test method covers the determination of the density or relative density of light hydrocarbons including liquefied petroleum gases (LPG) having Reid vapor pressures exceeding 101.325?kPa (14.696?psi). 1.2 The prescribed apparatus should not be used for materials having vapor pressures...

ASTM D1122-22 - Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
September 1, 2022 - ASTM International

4.1 The relative density of an engine coolant may be used to determine the approximate percent glycol, freezing point, and boiling point, provided the glycol type is known. 4.2 The relative density of an engine coolant concentrate can be used as a production control test. 4.3 ASTM specifications...

Advertisement