loading
IEEE IMAGE PROCESSING - IMAGE PROCESSING HANDBOOK, THIRD EDITION
IEEE
A description is not available for this item.
Essential Principles of Image Sensors
August 12, 2014 - CRC

Providing a succinct introduction to the systemization, noise sources, and signal processes of image sensor technology, Essential Principles of Image Sensors discusses image information and its four factors: space, light intensity, wavelength, and time. Featuring...

Digital Converters for Image Sensors
January 1, 2015 - SPIE

This book is intended for image sensor professionals and those interested in the boundary between sensor systems and analog and mixed-signal integrated circuit design. It provides in-depth tips and techniques necessary to understand and implement these two types of complex...

High Dynamic Range Imaging: Sensors and Architectures
January 1, 2013 - SPIE

Illumination is a crucial element in many applications, matching the luminance of the scene with the operational range of a camera. When luminance cannot be adequately controlled, a high dynamic range (HDR) imaging system may be necessary. These systems are being increasingly used in...

ASTM E2905/E2905M-26 - Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
July 1, 2026 - ASTM International

5.1 Visual interpretation of gear teeth condition, such as contact patterns, scuffing, and wear, differs from examination for surface-breaking cracks or early signs of macro-pitting. Guidance for visual interpretation of gear tooth condition is provided in ASNI/AGMA 1010-F14. 5.2 Eddy current array...

ASTM F3080-21(2026) - Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector, Infrared Measurement, and CCTV Camera System
June 1, 2026 - ASTM International

1.1 Laser profiling is a non-contact inspection method used to create a pipe wall profile and internal measurement using a standard CCTV pipe inspection system, 360° laser light projector, a measurement by means of infrared sensors and geometrical profiling software. This practice covers the...

ASTM E2847-21(2026) - Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
April 1, 2026 - ASTM International

1.1 This test method covers electronic instruments intended for measurement of temperature by detecting the intensity of thermal radiation exchanged between the subject of measurement and the sensor. 1.2 The devices covered by this test method are referred to as infrared thermometers in this...

ASTM ISO/ASTM52953-25 - Additive manufacturing for metals — General principles — Registration of data acquired from process monitoring and for quality control
January 1, 2025 - ASTM International

1.1 This document sets and defines the minimum requirements for registration of data acquired from process monitoring and for quality control in additive manufacturing (AM), including the description of a procedure. 1.2 Furthermore, this document comprises actions that users shall execute to...

Multi-Sensor Image Fusion and Its Applications
July 28, 2005 - CRC

Taking another lesson from nature, the latest advances in image processing technology seek to combine image data from several diverse types of sensors in order to obtain a more accurate view of the scene: very much the same as we rely on our five senses. Multi-Sensor...

ASTM D8559-24 - Standard Specification for Ambient Outdoor Air Quality Sensors and Sensor-Based Instruments for Portable and Fixed-Point Measurement
March 1, 2024 - ASTM International

1.1 This specification covers performance criteria for ambient outdoor air quality sensors based on the evaluation described in Practice D8406. 1.2 This specification does not apply to sensors or instruments that remotely measure atmospheric pollutants using open path, lidar, or...

ASTM E2566/E2566M-24 - Standard Test Method for Evaluating Response Robot Sensing: Visual Acuity
November 1, 2024 - ASTM International

5.1 Various levels of visual acuity are essential when remotely operating robots in unstructured and often hazardous environments. Missions typically include establishing situational awareness, finding available paths, maneuvering through obstacles, identifying objects of interest, and performing...

ASTM D8571-24 - Standard Practice for Detection of Hydrocarbon Liquids in Soils by Fluorescence with an Optical Imaging Profiler Using Direct Push Methods
May 1, 2024 - ASTM International

1.1 This practice presents a method for delineating the subsurface presence of nonaqueous phase liquids (NAPLs) consisting of petroleum hydrocarbons, coal tars, and similar waste materials using an optical image profiler (OIP) system. The OIP probe is advanced into waste materials, soils,...

ASTM F3327-23 - Standard Practice for Recording the A-UGV Test Configuration
December 1, 2023 - ASTM International

5.1 The significance of the information to be recorded in a test report allows for A-UGV performance to be contextualized with A-UGV configuration. 5.2 Limitations of the practice are that not all A-UGVs have the same capabilities or configuration parameters. For example, for capabilities, a...

ISO/IEC 18038 - Information technology — Computer graphics, image processing and environmental representation — Sensor representation in mixed and augmented reality
April 1, 2020 - ISO

This document defines the framework and information reference model for representing sensor-based 3D mixed-reality worlds. It defines concepts, an information model, architecture, system functions, and how to integrate 3D virtual worlds and physical sensors in order to provide...

ASTM F3615-23 - Standard Practice for Additive Manufacturing — Powder Bed Fusion — Condition-Defined Maintenance for Optical Systems
July 1, 2023 - ASTM International

4.1 The overall objective of this practice is to provide recommendations for the systematic acquisition of image data that indicate the health condition of the wear-sensitive SPW in PBF-LB/M machines. These data may allow a user to determine calibration and maintenance cycles based on the...

ASTM D8406-22 - Standard Practice for Performance Evaluation of Ambient Outdoor Air Quality Sensors and Sensor-based Instruments for Portable and Fixed-point Measurement
September 1, 2022 - ASTM International

1.1 This practice establishes standardized tests for the performance evaluation of sensor-based continuous instruments for ambient outdoor air quality measurements. It describes both laboratory and field tests that provide information on candidate sensor repeatability, sensitivity,...

ASTM E3353-22 - Standard Guide for In-Process Monitoring Using Optical and Thermal Methods for Laser Powder Bed Fusion
July 1, 2022 - ASTM International

1.1 This guide provides information on emerging in-process monitoring sensors, sensor configurations, sensor data analysis, and sensor data uses for the laser powder bed fusion additive manufacturing process. 1.2 The sensors covered produce data related to and...

ASTM F1166-23 - Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
January 1, 2023 - ASTM International

1.1 This practice provides ergonomic design criteria from a human-machine perspective for the design and construction of maritime vessels and structures and for equipment, systems, and subsystems contained therein, including vendor-purchased hardware and software. 1.1.1 The focus of these design...

AS6060A - JAUS Environment Sensing Service Set
October 28, 2021 - SAE International

This document defines a set of standard application layer interfaces called JAUS Environment Sensing Services. JAUS Services provide the means for software entities in an unmanned system or system of unmanned systems to communicate and coordinate their activities. The Environment Sensing Services...

Advertisement