5.1 The determination of the total volume?percent of saturates, olefins, and aromatics in petroleum fractions is important in characterizing the quality of petroleum fractions as gasoline blending components and as feeds to catalytic reforming processes. This information is also important in...
1.1 This test method covers the determination of the organically combined sulfuric anhydride existing in a sample of sulfated oil by boiling the sample with sulfuric acid and determining the acidity of the reaction mixture. This test method is applicable only to oils that split off their combined...
5.1 Zeolite composition with reference to silica and alumina is an important indicator of zeolite performance and is a valuable tool for assessing parameters in various industrial zeolite based catalyst processes. 5.2 This guide will be useful to zeolite manufacturers and end users...
1.1 These test methods cover establishment of procedures for conducting tests to determine the mechanical properties of externally and internally threaded fasteners, washers, direct tension indicators, and rivets. 1.2 Property requirements and the applicable tests for their determination are...
4.1 This classification provides a uniform set of usage definitions within the bicycle industry. Included within this classification is a set of graphical indicators to provide retailers and consumers with an indication of the intended use of a particular bicycle or aftermarket components.
5.1 This test method is designed to evaluate the shear strength, toughness, and strain tolerance of an asphalt binder under constant shear loading. 5.2 The peak stress is an indicator of the shear strength of an asphalt binder under constant loading at a given temperature or stiffness. 5.3...
1.1 These test methods cover establishment of procedures for conducting tests to determine the mechanical properties of externally and internally threaded fasteners, washers, direct tension indicators, and rivets. 1.2 Property requirements and the applicable tests for their determination are...
5.1 The only truly valid image quality indicator is a material or component, equivalent to the part being neutron radiographed, with a known standard discontinuity, inclusion, omission, or flaw (reference standard comparison part). The SI is designed to substitute for the reference standard,...
4.1 Screening methods are often used to determine the presence or absence of a specific analyte, groups of analytes, classes of compounds or other indicators of chemical compounds in order to determine if further analysis or action is necessary. The determination whether to proceed with...
1.1 This specification covers the requirements for compressible-washer-type direct tension indicators, (DTIs) capable of indicating the achievement of a specified minimum tension in a structural bolting assembly. 1.2 Eight types of DTIs in nominal diameter sizes 1/2 through 1 1/2 in. as well...
1.1 These test methods cover four procedures for determination of the permeability [relative permeability] of materials having a relative permeability not exceeding 6.0. 1.2 The test methods covered are as follows: 1.2.1 Test Method 1-Fluxmetric Method is suitable for materials with relative...
5.1 The ability of a substrate surface to readily absorb water is a key indicator in determining how to correctly install many types of flooring adhesives, primers, self-leveling underlayments, and other products. Several flooring industry publications such as CRI's Carpet Installation...
1.1 This test method covers a procedure for the determination of basic constituents in petroleum products and new and used lubricants. This test method resolves these constituents into groups having weak-base and strong-base ionization properties, provided the dissociation constants of the more...
5.1 The indirect tensile cracking test is used to determine asphalt mixture cracking resistance at an intermediate temperature which could range from 5?°C to 35?°C, depending on local climate. The specimens are readily obtained from Superpave gyratory compactor compacted cylinders with a diameter...
5.1 This test method permits accurate and nondestructive thickness determination of bound pavement layers. As such, this test method is widely applicable as a pavement system assessment technique. 5.2 Although this test method, under the right conditions, can be highly accurate as a layer-thickness...
5.1 In any sealant application, the sealant must be capable of maintaining an adhesive bond to the substrate when held in strain for its intended service life. 5.2 This test method is an indicator of a sealant's ability to adhere under strain to a given substrate. 5.3 The default test strain...
5.1 The energy input rate test is used to confirm that the booster heater is operating properly prior to further testing. 5.2 Booster heater flow capacity is an indicator of the booster heater's ability to supply hot water for sanitation. The booster heater's flow capacity can be used by the...
1.1 This practice provides recommended procedures for sampling synthetic turf fiber and finished fabric in a manufacturing location for further testing to identify and quantify per- and polyfluoroalkyl substances (collectively hereafter referred to as PFAS) in synthetic turf fiber and fabric. 1.2...
5.1 The standard method for obtaining a representative UF6 sample from a cylinder involves sampling from the liquid phase. Material homogeneity is primarily assessed based on the uranium isotope content, which serves as the key indicator. However, the representativeness of a sample with...