1.1 Infrared (IR) spectroscopy is a valuable method for the identification and comparison of paints and coatings (1-11). This guide provides basic recommendations and information about infrared spectrometers and accessories, with an emphasis on sampling techniques specific to paint...
1.1 Infrared spectroscopy (IR) is a valuable method for the identification and comparison of pressure sensitive tapes (1-23). This guide covers basic recommendations and information about IR spectrometers and accessories, with an emphasis on sampling techniques specific to pressure sensitive...
1.1 Infrared spectroscopy (IR) is a valuable method for the identification and comparison of pressure sensitive tapes (1-23). This guide covers basic recommendations and information about IR spectrometers and accessories, with an emphasis on sampling techniques specific to pressure sensitive...
5.1 This test method provides guidelines and basic test methods for the accuracy verification of infrared thermometers. It includes test set-up and calculation of uncertainties. It is intended to provide the user with a consistent method, while remaining flexible in the choice of calibration...
1.1 Laser profiling is a non-contact inspection method used to create a pipe wall profile and internal measurement using a standard CCTV pipe inspection system, 360° laser light projector, a measurement by means of infrared sensors and geometrical profiling software. This practice covers the...
1.1 These test methods cover procedures for the chemical and mass spectrometric analysis of nuclear-grade gadolinium oxide powders to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Carbon by Direct Combustion-Thermal Conductivity...
1.1 This test method covers the determination of methyl groups (that is, comonomer content) in polyethylenes by infrared spectrophotometry. The test method is applicable to copolymers of ethylene with 1-butene, 1-hexene, or 1-octene having densities above 900 kg/m3. High-pressure low-density...
1.1 This test method determines fatty acid methyl esters (FAME or biodiesel) in diesel fuel oils. FAME can be quantitatively determined from 1.0?% to 30.0?% by volume. This test method uses linear variable filter (LVF) array based mid-infrared spectroscopy for monitoring FAME concentration....
1.1 This test method covers the determination of fatty acid methyl ester (FAME) biodiesel and triglyceride (TAG) concentrations in traditional diesel and renewable diesel fuel blends using a portable mid-infrared spectrometer. 1.2 The method applies to samples with biodiesel concentrations...
1.1 This method covers the proper use of handheld digital, bimetal, and infrared thermometers for monitoring the temperature of asphalt mixtures during production, placement, and compaction, and with temperatures typically 50?°C to 220?°C [122?°F to 428?°F]. Each type of thermometer has...
1.1 This guide covers basic standards and procedures for the use of infrared thermography in evaluation of buildings, building envelopes, systems, and equipment. This guide is intended to be used by construction professionals, restoration professionals, engineers, and other design...
1.1 This specification covers electronic instruments intended for intermittent monitoring of patient temperatures. 1.2 This specification does not cover infrared thermometers. Specification E1965 covers specifications for IR thermometers. 1.3 The values stated in either SI units or...
5.1 Biodiesel is a blendstock commodity primarily used as a value-added blending component with diesel fuel. 5.2 This test method is applicable for quality control in the production and distribution of diesel fuel and biodiesel blends containing FAME.
4.1 This practice provides general guidelines for the practice of liquid chromatography or size exclusion chromatography coupled with infrared spectrometric detection and analysis (LC/IR, SEC/IR). This practice assumes that the chromatography involved is adequate to resolve a sample into...
5.1 The ability to collect an infrared spectrum of a liquid paint as supplied in the container from the manufacturer is of significant importance when performing qualification testing. Historically, fingerprinting a material for such purpose involved separating the components of the paint...
1.1 This practice covers a simple, rapid practice to prove the identity of a rubber chemical before incorporation into a rubber mix by comparison of its infrared absorption spectrum with that of a reference specimen. 1.2 This technique can also be used to detect gross contamination or large...
4.1 This practice details a fiber training program that identifies the information and guidelines necessary for preparing a trainee to become a qualified FSP. The trainee is under the direct supervision of a qualified FSP throughout their training. Upon successful completion of the program, a...
This guide covers method for evaluating the relative extent of oxidation in ultra-high-molecular
1.1 This test method covers the determination of the content of biodiesel (fatty acid methyl esters (FAME)) in diesel fuel oils for volume fractions of 0.1?% to 40.0?% by mid-infrared analyzer. Note 1: ASTM and ISO specification fuels falling within the scope of this test method include...
1.1 This test method for the determination of carbon in mixed oxide (MOX) pellets consists of combusting carbon with oxygen in a high-frequency induction furnace and subsequent detection of the resulting carbon dioxide (CO2) using a non-dispersive infrared detector (NDIR). Sulfur oxide is...
Narrow Your Results