loading
SEMI MATERIALS - MATERIALS
SEMI
A description is not available for this item.
ASTM E2231-26 - Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
April 15, 2026 - ASTM International

1.1 This practice describes procedures for specimen preparation and mounting when testing pipe and duct insulation materials to assess flame spread and smoke development as surface burning characteristics using Test Method E84. 1.2 If the pipe or duct insulation...

ASTM C1616-25 - Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
September 1, 2025 - ASTM International

5.1 Some insulation materials contain moisture, which will affect the thermal and other physical properties of the insulation.

ASTM C1763-20(2025) - Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
September 1, 2025 - ASTM International

6.1 This test method provides a means of measuring the water absorption of flat or cylindrical specimens of thermal insulation materials under isothermal conditions as a result of direct immersion in liquid water. It is intended for quality control and product and material...

ASTM E2231-25 - Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
December 1, 2025 - ASTM International

1.1 This practice describes procedures for specimen preparation and mounting when testing pipe and duct insulation materials to assess flame spread and smoke development as surface burning characteristics using Test Method E84. 1.2 If the pipe or duct insulation...

ASTM C930-19(2025) - Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
April 15, 2025 - ASTM International

1.1 This classification identifies potential concerns and effects that could result from direct contact with thermal insulation materials and accessories, or be caused by indirect action of events such as aging, fire, or physical disturbance. 1.2 Intent of Classification: 1.2.1 It is...

ASTM C1338-25 - Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
April 1, 2025 - ASTM International

2.1 The type of materials used in the manufacture of insulation products and the type of membrane used to face these products can sometimes affect fungi sustenance in the presence of high humidity. 2.2 This test method is used to determine the relative ability of an insulation...

ASTM C929-14(2026) - Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
March 1, 2026 - ASTM International

1.1 This practice is intended to provide guidance and direction in the handling, transporting, shipping, storage, receiving, and application of thermal insulating materials to be used as a surface treatment or as part of the thermal insulation system in contact with austenitic...

ASTM D5470-17(2024) - Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
December 1, 2024 - ASTM International

1.1 This standard covers a test method for measurement of thermal impedance and calculation of an apparent thermal conductivity for thermally conductive electrical insulation materials ranging from liquid compounds to hard solid materials. 1.2 The term "thermal conductivity"...

GMW16653 - Thermal Insulation Materials
January 1, 2021 - GMW

Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose/Material Description. Materials shall be identified by Types (see Table 1) according...

ASTM C1642-20(2024) - Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
November 1, 2024 - ASTM International

5.1 This practice is intended to measure air flow through materials used to fill joints found in building construction. 5.2 This practice does not purport to establish all required criteria for the selection of an air barrier assembly. Therefore, the results should be used only for...

ASTM C1304-23 - Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
June 1, 2023 - ASTM International

4.1 Thermal insulating materials that produce objectionable odors could cause discomfort to persons occupying a structure insulated with such materials. Therefore, an examination to determine the odor potential of a particular insulation is desirable.

ASTM D7446-09(2026) - Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
January 1, 2026 - ASTM International

This specification addresses the physical, chemical and test requirements for structural insulated panel (SIP) adhesives suitable for the bonding of oriented strand boards (OSB) to rigid cellular polystyrene thermal insulation core materials for general structural use. Douglas-fir to...

ASTM D229-26 - Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
June 1, 2026 - ASTM International

18.1 This test method provides useful engineering information for evaluating the mechanical behavior of rigid electrical insulation at elevated temperature. When the proper exposure and test temperatures are chosen, depending on the material and end-use operating temperature, use the...

ASTM C1338-19(2022) - Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
September 1, 2022 - ASTM International

2.1 The type of materials used in the manufacture of insulation products and the type of membrane used to face these products can sometimes affect fungi sustenance in the presence of high humidity. 2.2 This test method is used to determine the relative ability of an insulation...

ASTM C871-18(2023) - Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
May 1, 2023 - ASTM International

1.1 These test methods cover laboratory procedures for the determination of water-leachable chloride, fluoride, silicate, and sodium ions in thermal insulation materials in the parts per million range. 1.2 Selection of one of the test methods listed for each of the ionic...

PIP INSH1000 - Hot Service Insulation Materials and Installation Specification
August 1, 2018 - PIP

This Practice provides requirements for materials and installation of hot service insulation systems on the external surfaces of piping and equipment, ambient to 649°C (1200°F). This Practice describes requirements for hot service insulation materials and accessories,...

ASTM D8647-25 - Standard Test Methods for Flammability of Rigid Plastic Materials Used for Electrical Insulation
December 1, 2025 - ASTM International

4.1 Two fire test methods are contained in this standard. Both test methods provide procedures which make relative comparisons of the ignitability and continued flaming (if ignition occurs) of the rigid electrical insulation materials being tested after the application of an ignition...

JIS A 9510 - Inorganic porous thermal insulation materials
August 22, 2016 - JSA

This Japanese Industrial Standard specifies inorganic porous thermal insulation boards (hereafter referred to as "board insulation") and inorganic porous thermal insulation pipes (hereafter referred to as "pipe insulation") used for thermal insulation...

Advertisement