5.1 Advanced ceramic powders and porous ceramic bodies often have a very fine particulate morphology and structure that are marked by high surface-to-volume (S-V) ratios. These ceramics with high S-V ratios commonly exhibit enhanced chemical reactivity and lower sintering temperatures. Results of...
5.1 The indirect tensile cracking test is used to determine asphalt mixture cracking resistance at an intermediate temperature which could range from 5?°C to 35?°C, depending on local climate. The specimens are readily obtained from Superpave gyratory compactor compacted cylinders with a...
1.1 This specification covers floor covering having a vinyl plastic wear layer with backing. Products may also contain non-PVC specialty performance top layer(s) or intermediate layer(s), or both. 1.2 Two types of floor covering based on binder content are covered. The floor covering is...
1.1 This specification covers plastics and products made from plastics that are designed to be composted under aerobic conditions in municipal and industrial aerobic composting facilities, where thermophilic conditions are achieved. 1.2 This specification is intended to establish the requirements...
4.1 The temperature of an asphalt mixture during production, placement, and compaction is one of the primary factors that affect the long-term performance of an asphalt pavement due to temperature's effect on the ability to compact an asphalt mixture. In general, the higher the temperature of an...
1.1 This test method covers vibration testing of filled intermediate bulk containers (IBCs) intended to contain liquid hazardous materials (dangerous goods) and is suitable for testing IBCs of any design or material type. This test method is required as part of the qualification of IBCs in...
4.1 This guide establishes the minimum knowledge, skills, and abilities required to use a GNSS receiver to navigate on land and small bodies of water. A person trained to this guide shall be endorsed for Intermediate Land GNSS Receiver Use (GNSS-II Endorsed). 4.1.1 Every person who is...
5.1 This test method provides a means of using rheological measurements for characterizing the hardness and relaxation properties of an asphalt binder in the high-stiffness region.
4.1 This practice may be used to evaluate the microbial retentivity of any membrane filter used for liquid sterilization where validation is required in the manufacturing of pharmaceutical, biopharmaceutical, and biological products or their intermediates (where applicable). These processes...
1.1 These test methods describe procedures for assessing the adhesion of metallic and inorganic coatings and other thin films to metallic and nonmetallic substrates. Assessment is made by applying pressure-sensitive tape to a coated surface and then utilizing a mechanical device to remove the tape...
1.1 This specification covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high-temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Selection will...
1.1 This general requirements specification covers a group of common requirements that, unless otherwise specified in the applicable product specification, apply to rolled structural steel bars, plates, shapes, and sheet piling covered by each of the following product specifications issued by ASTM:...
5.1 ASTM test methods are frequently intended for use in the manufacture, selling, and buying of materials in accordance with specifications and therefore should provide such precision that when the test is properly performed by a competent operator, the results will be found satisfactory for...
4.1 Organic peroxides are widely used as chemical intermediates, catalysts, and initiators. These test methods provide procedures for assaying organic peroxides to determine if they are suitable for their intended use.
5.1 The total fluorine, chlorine, and sulfur contained in LPG, similar low molecular weight hydrocarbons, and DME can be harmful to many catalytic chemical processes, lead to corrosion, and contribute to pollutant emissions. While LPG specifications limit sulfur, some specifications also contain...
1.1 This specification covers two types of methyl ethyl ketone that are used primarily as solvents in lacquers and industrial coatings, but also in adhesives, printing inks, lube oil dewaxing, and as chemical intermediates. 1.2 The values stated in SI units are to be regarded as standard. No...
This specification covers cold-rolled, high-carbon strip. The strip shall be furnished cold rolled spheroidized annealed, soft annealed, intermediate hardness, or full hard, as specified. The heat or cast analysis shall conform to that specified requirement. Hardness test and bend test shall...
1.1 This test method covers the determination of the distillation range of liquids boiling between 30?°C and 350?°C, that are chemically stable during the distillation process, by manual or automatic distillation procedures. 1.2 This test method is applicable to organic liquids such as...
5.1 This test method provides a means for evaluating materials, products, or assemblies, for the mass loss, and fire behavior (and, optionally, smoke obscuration) they exhibit under specified exposure conditions. 5.2 Results of this test method depend on the actual specimen tested, in the form and...
1.1 This practice covers procedures for the sampling and data reporting of bulk shipments of carbon black in three-compartment hopper rail cars and compartmented bulk hopper trailers. Note 1: The tests to be made on the samples obtained by this practice, how many samples are taken, where they are...
Narrow Your Results