loading
AIHA ACCOUNTING - ACCOUNTING AND RECORDKEEPING MADE EASY FOR THE SELF-EMPLOYED
AIHA
A description is not available for this item.
ASTM D6542-05(2026) - Standard Practice for Tonnage Calculation of Coal in a Stockpile
July 15, 2026 - ASTM International

4.1 The physical inventory of tons of coal in a stockpile, as calculated by this practice, may be used for accounting and tax purposes. 4.2 The inventory results may be compared to other estimates of the inventory, such as: 4.2.1 Tons from a previous inventory less tons shipped or consumed....

ASTM D4211-26 - Standard Guide for Fish Sampling
July 1, 2026 - ASTM International

4.1 Fish sampling includes a number of lethal and non-lethal practices. 4.2 This guide provides an overview of commonly used fish sampling practices. 4.3 This summary serves as a brief accounting of options available to personnel responsible for determining the fish sampling practice or...

DS/ISO 13616-1 - Financial services – International bank account number (IBAN) – Part 1: Structure of the IBAN
October 5, 2020 - DS

This document specifies the elements of an international bank account number (IBAN) used to facilitate the processing of data internationally in data interchange, in financial environments as well as within and between other industries. The IBAN is designed for automated...

ISO 13616-1 - Financial services — International bank account number (IBAN) — Part 1: Structure of the IBAN
September 1, 2020 - ISO

This document specifies the elements of an international bank account number (IBAN) used to facilitate the processing of data internationally in data interchange, in financial environments as well as within and between other industries. The IBAN is designed for automated...

ASTM F1939-26 - Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
June 15, 2026 - ASTM International

1.1 This test method rates the non-steady state thermal resistance or insulating characteristics of flame resistant clothing materials subjected to a continuous, standardized radiant heat exposure. 1.1.1 This test method is not applicable to clothing materials that are not flame resistant. Note 1:...

ASTM D5201-26 - Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
June 1, 2026 - ASTM International

1.1 This practice covers procedures commonly used in the paint industry to formulate paints and coating materials. It describes procedures for calculating formulation values for weight solids, volume solids, solvent content, volatile organic compound (VOC) content, hazardous air pollutant (HAP)...

ASTM E1935-26 - Standard Practice for Calibrating and Measuring CT Density
June 15, 2026 - ASTM International

6.1 This practice allows specification of the density calibration procedures to be used to calibrate and perform material density measurements using CT image data. Such measurements can be used to evaluate parts, characterize a particular system, or compare different systems, provided that observed...

ASTM G203-10(2026) - Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
June 1, 2026 - ASTM International

5.1 Many sliding systems exhibit intermittent high friction force excursions compared to competing tribosystems. However, where friction forces or friction coefficients are averaged, the test data may show that the two systems have the same friction characteristics, when in fact they were not the...

ASTM E1125-16(2026) - Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
June 1, 2026 - ASTM International

5.1 The electrical output of a photovoltaic device is dependent on the spectral content of the illumination source, its intensity, and the device temperature. To make standardized, accurate measurements of the performance of photovoltaic devices under a variety of light sources when the intensity...

ASTM D4211-21(2026) - Standard Guide for Fish Sampling
May 1, 2026 - ASTM International

4.1 Fish sampling includes a number of lethal and non-lethal practices. 4.2 This guide provides an overview of commonly used fish sampling practices. 4.3 This summary serves as a brief accounting of options available to personnel responsible for determining the fish sampling practice or...

ASTM F2703-26 - Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Burn Injury Prediction
May 1, 2026 - ASTM International

1.1 This test method measures the non-steady state heat transfer through flame-resistant materials for clothing subjected to a combined convective and radiant heat exposure. 1.1.1 This test method is not applicable to materials that are not flame resistant. Note 1: The determination of a material's...

ASTM F2700-26 - Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Continuous Heating
May 1, 2026 - ASTM International

1.1 This test method measures the non-steady state heat transfer through flame-resistant materials for clothing subjected to a continuous, combined convective and radiant heat exposure. 1.1.1 This test method is not applicable to materials that are not flame resistant. Note 1: The determination of...

ASTM C1131-26 - Standard Practice for Life Cycle Cost Analysis (LCCA) of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
May 1, 2026 - ASTM International

3.1 The significance of the LCA method is that it is a comprehensive technique for taking into account all relevant monetary values over the project design life and provides a measure of the total cost of the material, system, or structure. 3.2 The LCA method can be effectively applied in...

ASTM D6780/D6780M-26 - Standard Test Methods for Water Content and Dry Density of Soil In situ by Time Domain Reflectometry (TDR)
June 1, 2026 - ASTM International

1.1 These test methods may be used to determine the water content of soils and the dry density of soils in place using Time Domain Reflectometry. 1.2 These test methods apply to soils that have 30?% or less by weight of their particles retained on the 19.0-mm [3/4-in.] sieve. 1.3 These test methods...

Advertisement