loading
NEBB ENVIRONMENTAL SYSTEM - Enviromental Systems Technology
January 1, 1999 - NEBB

This publication has more than 1,020 pages written specifically for persons who need extensive information on heating, ventilating, and air-conditioning (HVAC) systems for background, reference, and practical applications. A true collector's item, this handsomely appointed, hard-back book brings...

International Environmental Risk Management A Systems Approach
August 14, 2020 - CRC

Based on the first edition with extensive analysis of practical applications of environmental risk management and compliance management systems, this second edition of International Environmental Risk Management reflects updates made in the understanding and application of risk...

International Environmental Standards Handbook
June 23, 1999 - CRC

Lack of knowledge about, and noncompliance with, international standards can result in loss of sales and partnership opportunities as well as possible legal action. The International Environmental Standards Handbook provides the necessary historical background to understand the...

ASTM F3227/F3227M-26 - Standard Specification for Environmental Systems in Aircraft
July 1, 2026 - ASTM International

1.1 This specification covers international standards for the environmental system aspects of airworthiness and design for "small" aircraft. 1.2 The applicant for a design approval must seek the individual guidance of their respective CAA body concerning the use of this specification...

ASTM D7584-16(2026) - Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber
July 1, 2026 - ASTM International

6.1 The environmental chamber method is an accelerated test for determining the resistance of Wet Blue and Wet White to the growth of fungi, the causal agent of mold. See Test Method D3273., 6.2 The environmental chamber method is useful in estimating the performance of fungicides and...

ASTM D1119-22(2026) - Standard Test Method for Percent Ash Content of Engine Coolants
August 1, 2026 - ASTM International

1.1 This test method covers the determination of ash content after ignition of commercial engine coolants and antirusts, as packaged or after use. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does...

ASTM D6752/D6752M-26 - Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
August 1, 2026 - ASTM International

1.1 This test method covers the determination of bulk specific gravity of compacted asphalt mixtures by the vacuum sealing method. 1.2 This method can be used for compacted cylindrical and cubical laboratory and field asphalt mixture specimens. 1.3 The bulk specific gravity of the compacted asphalt...

ASTM F2199-26 - Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
August 1, 2026 - ASTM International

1.1 This test method covers the determination of the change in linear dimensions of resilient floor tile/plank products after exposure to heat and reconditioning to ambient temperature. 1.2 This test method allows one to also measure curling that can occur after a specimen has been exposed to heat...

ASTM D1177-22(2026) - Standard Test Method for Freezing Point of Aqueous Engine Coolants
August 1, 2026 - ASTM International

1.1 This test method covers the determination of the freezing point of an aqueous engine coolant solution in the laboratory. Note 1: Where solutions of specific concentrations are to be tested, they shall be prepared from representative samples as directed in Practice D1176. Secondary phases...

ASTM F3519-21(2026)e1 - Standard Guide for Establishing a Reporting Structure for Exoskeleton Analysis
July 15, 2026 - ASTM International

1.1 This guide provides a structure for exoskeleton manufacturers to document their analysis. Furthermore, this guide should be used in conjunction with Practice F3474, Guide F3518, Guide F3688, and other future documents. 1.2 This standard does not purport to address all of the safety concerns, if...

ASTM D1992-17(2026) - Standard Guide for Testing Synthetic Plasticizers Used in Rubber
July 1, 2026 - ASTM International

1.1 This guide covers test methods for synthetic plasticizers that are used in rubber applications. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety,...

ASTM B930-03(2026) - Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
July 1, 2026 - ASTM International

1.1 This test method describes a procedure for measuring abnormally large grains and the frequency of those grains in cemented tungsten carbides (hardmetals). 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the...

Advertisement