loading
ASTM D6542-05(2026) - Standard Practice for Tonnage Calculation of Coal in a Stockpile
July 15, 2026 - ASTM International

4.1 The physical inventory of tons of coal in a stockpile, as calculated by this practice, may be used for accounting and tax purposes. 4.2 The inventory results may be compared to other estimates of the inventory, such as: 4.2.1 Tons from a previous inventory less tons...

ASTM D6172/D6172M-18(2026) - Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
July 15, 2026 - ASTM International

4.1 This test method audits the volume of material in a stockpile and is used with a density value to calculate a tonnage calculation value used to compare the book value to the physical inventory results. This test method is used to determine the volume of coal or other materials in a...

ASTM D6347/D6347M-05(2026) - Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
July 15, 2026 - ASTM International

5.1 The measured mean bulk density of a coal stockpile is used with a measurement of the stockpile volume per Test Method D6172/D6172M. Procedures to determine the quantity of stockpiled coal. This measure of quantity is often used as a reference value for adjusting inventory records.

ASTM E2132-25 - Standard Practice for Inventory Verification: Electronic and Physical Inventory of Assets
December 1, 2025 - ASTM International

1.1 This practice addresses inventory verification which includes either physically or electronically confirming the existence, location, and quantity of assets. 1.2 Inventory verification is a key element in the asset management process. 1.3 An appropriate level to track assets is...

ASTM D8655-26 - Standard Classification System for Cell Classification of Pre- and Post-Consumer Recycled Rigid Poly(Vinyl Chloride)(PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Materials
April 15, 2026 - ASTM International

4.1 While end-use product performance and durability remain critical for functionality, the focus on recycling rigid PVC products or components at their end of life needs to be intensified. Participants in the value chain (for example, material scientists, product designers, procurement, and...

ASTM E2631-25 - Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label
December 1, 2025 - ASTM International

5.1 There is no consistent method for the physical placement of an identifying label on equipment in the possession of an entity. 5.2 This practice is intended to expedite and improve the physical inventory and self-assessment processes and other occasions in which the instant identification...

ASTM E2497-11(2025) - Standard Practice for Calculation of Asset Movement Velocity (AMV)
December 1, 2025 - ASTM International

1.1 This practice calculates asset movement velocity (AMV) based on the movement of assets. 1.2 There is no existing, recognized practice for calculating AMV. 1.3 This practice is designed to be applicable and appropriate for all asset-holding entities. 1.4 This practice does not cover material...

ASTM C998-26 - Standard Practice for Sampling Surface Soil for Radionuclides
February 1, 2026 - ASTM International

5.1 Soil provides a source material for the determination of selected radionuclides and serves as an integrator of the deposition of airborne materials. Soil sampling should not be used as the primary measurement system to demonstrate compliance with applicable radionuclides in air standards. This...

ASTM E543-26 - Standard Specification for Agencies Performing Nondestructive Testing
January 1, 2026 - ASTM International

This specification covers the minimum requirements for agencies performing nondestructive testing. It can also be used as a basis to evaluate testing or inspection agencies, or both that are intended for use in qualifying or accrediting, or both of testing or inspection agencies that are either...

ASTM D4695-03(2025) - Standard Guide for General Pavement Deflection Measurements
October 1, 2025 - ASTM International

5.1 NDT measurement of pavement surface deflections provides information that can be used for the structural evaluation of new or in-service pavements. These deflection measurements may be used to determine the following pavement characteristics: 5.1.1 Modulus of each layer. 5.1.2 Overall stiffness...

ASTM E1565-00(2025) - Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures
May 1, 2025 - ASTM International

4.1 The proper handling of material stored at low temperatures ensures that the stability of sensitive biological materials is not comprised. 4.2 Properly designed inventory control systems ensure the maximum use of freezer space, that all material can be located easily, and that any item is...

ASTM E2986-25 - Standard Guide for Evaluation of Environmental Aspects of Sustainability of Manufacturing Processes
September 1, 2025 - ASTM International

1.1 This guide provides guidance to develop manufacturer-specific procedures for evaluating the environmental sustainability performance of manufacturing processes. This guide introduces decision support methods that can be used to improve sustainability performance. 1.2 The scope of this guide is...

ASTM E3504-25 - Standard Guide for CERCLA Section 128(a) Response Program Grant Conformance Assessment
July 1, 2025 - ASTM International

4.1 To be eligible for a CERCLA Section 128(a) response program grant to address contamination at brownfields properties, federally-recognized Tribes and States must demonstrate that they meet one of the property eligibility requirements below; grant recipients are prohibited from using grant money...

ASTM F2943-25 - Standard Guide for Presentation of End User Labeling Information for Musculoskeletal Implants
March 1, 2025 - ASTM International

1.1 The goal of this guide is to recommend a universal label format (across manufacturers and various implants) of content and relative location of information necessary for final implant selection within an implant's overall package labeling. 1.2 This guide recommends package labeling for...

ASTM D4463/D4463M-25 - Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
January 1, 2025 - ASTM International

1.1 This guide covers the deactivation of fresh fluid catalytic cracking (FCC) catalyst by hydrothermal treatment prior to the determination of the catalytic cracking activity in the microactivity test (MAT) or the Advanced Cracking Evaluation (ACE) test. 1.2 The hydrothermal treatment of fresh FCC...

ASTM F3209-24a - Standard Guide for Autologous Platelet-Rich Plasma, Platelet Gels, and Whole Blood Gels for Use in Tissue Engineering and Cell Therapy
December 1, 2024 - ASTM International

1.1 This guide defines terminology and identifies key fundamental properties of autologous platelet-rich plasma (PRP), platelet gels, and whole blood gels (WBGs) intended to be used for tissue engineered medical products (TEMPS) or for cell therapy applications. This guide provides a common...

ASTM C1458-24 - Standard Test Method for Nondestructive Assay of Plutonium, Tritium and?241Am by Calorimetric Assay
December 1, 2024 - ASTM International

5.1 This test method is useful for determining the quantity of one or more isotopes present in a container like in the context of process monitoring, safeguard and inventory of nuclear materials. 5.1.1 Calorimetry is considered to be an established NDA method for the measurement of tritium....

ASTM D8570-24 - Standard Practice for Vented and Fugitive Gaseous Emissions Destruction by Thermal Oxidizer
October 1, 2024 - ASTM International

1.1 This practice covers the destruction of gaseous vented and fugitive emissions by thermal oxidization (Test Method D4891) (non-catalytic, electrically heated) in the 0?kJ/h to 158?258?kJ/h (150?000?Btu/h) (Practice D3588) range with a high destruction or removal efficiency (DRE) of 95?% to 99...

ASTM F3209-24 - Standard Guide for Autologous Platelet-Rich Plasma for Use in Tissue Engineering and Cell Therapy
October 1, 2024 - ASTM International

1.1 This guide defines terminology and identifies key fundamental properties of autologous platelet-rich plasma (PRP) and PRP-derived platelet gels intended to be used for tissue engineered medical products (TEMPS) or for cell therapy applications. This guide provides a common nomenclature and...

ASTM E1166-24 - Standard Guide for Network Level Pavement Management
May 1, 2024 - ASTM International

4.1 This guide provides network level PMS users with an outline of the basic components of a PMS to ensure the specific system the user selects or develops fulfills the agency needs and requirements. 4.2 This guide may be used by agencies or organizations wishing to develop, evaluate, or refine a...

Advertisement