loading
ASTM D4127-18a(2026) - Standard Terminology Used with Ion-Selective Electrodes
May 1, 2026 - ASTM International

1.1 This terminology covers those terms recommended by the International Union of Pure and Applied Chemistry (IUPAC), and is intended to provide guidance in the use of ion-selective electrodes for analytical measurement of species in water, wastewater, and brines. 1.2 This international...

ASTM F3306-26 - Standard Test Method for Ion Release Evaluation of Medical Implants
June 1, 2026 - ASTM International

5.1 Components of implanted medical devices can release ions, which may lead to adverse biological effects if released in sufficient quantities. Therefore, it may be necessary to characterize the ion release behavior over time to verify that a medical device or device components or...

ASTM D6581-18(2026) - Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
May 1, 2026 - ASTM International

1.1 These multi-test methods cover the determination of the oxyhalides-chlorite, bromate, and chlorate, and bromide, in raw water, finished drinking water and bottled (non-carbonated) water by chemically and electrolytically suppressed ion chromatography. The ranges tested using these test...

ASTM D2624-26 - Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
July 1, 2026 - ASTM International

5.1 The ability of a fuel to dissipate charge that has been generated during pumping and filtering operations is controlled by its electrical conductivity, which depends upon its content of ion species. If the conductivity is sufficiently high, charges dissipate fast enough to prevent their...

ASTM D8430-26 - Standard Test Method for Determination of Ammonia Nitrogen by Semi-Automated Gas Diffusion Colorimetry
July 1, 2026 - ASTM International

5.1 This test method is used for measuring ammonia and ammonium ion in water samples and soil or plant extracts. 5.2 Ammonia compounds are widely distributed in the environment and may be applied as fertilizer, used as cleaning compounds, or used in water treatment. 5.3 Ammonia nitrogen...

ASTM D6064-26 - Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
July 1, 2026 - ASTM International

This specification covers the requirements for 1,1,1,2,3,3,3-Heptafluoropropane (HFC-227ea) for use as a fire-fighting medium. However, this specification does not include the fire-fighting equipment or hardware that employs HFC-227ea, the conditions for employing such equipment, nor the storage or...

ASTM D8456-26 - Standard Test Method for Determination of Nitrosamines in Water by Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
July 1, 2026 - ASTM International

1.1 This test method covers the liquid chromatography tandem mass spectrometry (LC-MS/MS) detection and quantitation of N-nitrosamines after direct injection. It has been validated for groundwater, surface water, wastewater influents, and wastewater effluents. This test method is not limited to...

ASTM E1151-93(2026) - Standard Practice for Ion Chromatography Terms and Relationships
January 1, 2026 - ASTM International

This practice deals primarily with identifying the terms and relationships of those techniques that use ion exchange chromatography to separate mixtures and a conductivity detector to detect the separated components. However, most of the terms should also apply to ion chromatographic...

ASTM C889-26 - Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
July 1, 2026 - ASTM International

1.1 These test methods cover procedures for the chemical and mass spectrometric analysis of nuclear-grade gadolinium oxide powders to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Carbon by Direct Combustion-Thermal Conductivity...

ASTM D7237-18(2026) - Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
July 15, 2026 - ASTM International

1.1 This test method is used to establish the concentration of free cyanide in an aqueous wastewater, effluent and in-stream free cyanide concentrations after mixing treated water with receiving water. The test conditions of this test method are used to measure free cyanide (HCN and CN-) and...

ASTM D4128-18(2026) - Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
July 1, 2026 - ASTM International

1.1 This guide covers the identification and quantitation of organic compounds by gas chromatography/mass spectrometry (GC-MS) (electron impact) that are present or extracted from water and are capable of passing through a gas chromatograph without alteration. This guide can be used to provide...

ASTM D5790-18(2026) - Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
July 1, 2026 - ASTM International

1.1 This test method covers the identification and simultaneous measurement of purgeable volatile organic compounds. It has been validated for treated drinking water, wastewater, and ground water. This test method is not limited to these particular aqueous matrices; however, the applicability of...

ASTM D4328-18(2026) - Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines
May 1, 2026 - ASTM International

1.1 This practice covers the calculation of supersaturation of barium sulfate, strontium sulfate, and calcium sulfate dihydrate (gypsum) in brackish water, seawater, and brines in which barium, strontium, and calcium ions either coexist or exist individually in solution in the presence of...

ASTM D4266-17(2026)e1 - Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
January 1, 2026 - ASTM International

1.1 These test methods cover the determination of the operating ion-exchange capacity of both powdered cation-exchange resins (hydrogen form) and powdered anion-exchange resins (hydroxide form). These test methods are intended for use in testing new powdered ion-exchange resins when...

ASTM D7513-26 - Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges
January 1, 2026 - ASTM International

5.1 This test method can be used to evaluate the performance of unused mixed bed ion exchange cartridges for conformance to specifications. 5.2 This test method provides for the calculation of capacity in terms of the volume of water treated to a conductivity end point. 5.3 The test method...

ASTM D4765-26 - Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
April 1, 2026 - ASTM International

5.1 The capability of this test method to collect and quantitate both particulate and gaseous fluorides over the ranges normally encountered in industrial atmospheres makes it applicable for industrial hygiene evaluation and control purposes. The recommended range of this test method for fluoride...

ASTM D5627-26 - Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
January 1, 2026 - ASTM International

5.1 The presence of water extractables in ion-exchange resins can cause fouling of other materials downstream and contamination of process water. The quantity of water extractables is sometimes used as a specification to indicate resin quality, and typical values are 0.01?% to 0.1?%. 5.2 It...

ASTM D7319-26 - Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
March 1, 2026 - ASTM International

1.1 This test method covers a direct injection ion chromatographic procedure for determining existent and potential inorganic sulfate and total inorganic chloride content in hydrous and anhydrous denatured ethanol and butanol to be used in motor fuel applications. It is intended for the...

ASTM C1422/C1422M-26 - Standard Specification for Chemically Strengthened Flat Glass
March 1, 2026 - ASTM International

1.1 This specification covers the requirements for chemically strengthened glass products that are used in general building construction, transportation, solar energy, and other electronic applications, such as PC screens, notebooks, tablets, smart phones, and e-readers, as well as copy machine...

ASTM F3782-26 - Standard Practice for Sampling and Testing Synthetic Turf Fiber and Fabric for PFAS
April 1, 2026 - ASTM International

1.1 This practice provides recommended procedures for sampling synthetic turf fiber and finished fabric in a manufacturing location for further testing to identify and quantify per- and polyfluoroalkyl substances (collectively hereafter referred to as PFAS) in synthetic turf fiber and fabric. 1.2...

Advertisement