1.1 This specification covers castings made of ductile iron, also known as spheroidal or nodular iron, which is described as cast iron with the graphite substantially spheroidal in shape and essentially free of other forms of graphite, as defined in Terminology A644. 1.2 No...
4.1 The casting process has demonstrated radiographic similarities between internal discontinuities for ductile cast iron and cast steel to the extent that the reference radiographs for steel castings are applicable. The exact application and usage of discontinuity classifications contained...
1.1 This specification covers the materials and testing of shielded hubless couplings to join hubless cast iron soil pipe and fittings. 1.2 Several different types of hubless couplings are available for use in hubless cast iron sanitary and storm drain, waste, and vent piping...
1.1 This specification covers castings made of ductile iron, also known as spheroidal or nodular iron, which is described as cast iron with the graphite substantially spheroidal in shape and essentially free of other forms of graphite, as defined in Terminology A644. 1.2 No...
1.1 This test method measures the ability of inhibited and uninhibited Ethanol Fuel Blends defined by Specification D5798 and Denatured Fuel Ethanol defined by Specification D4806 to resist corrosion of iron should water become mixed with the fuel, using an accelerated laboratory test method...
This specification covers the performance evaluation of heavy duty shielded couplings to join hubless cast iron soil pipe and fittings. Physical properties of all stainless steel and gaskets shall comply with the specified values. Requirements for the elastomeric gasket, clamp assembly, and...
1.1 This specification covers UNS N08034, UNS N08935, and UNS N08354 welded pipe for general corrosion applications. 1.2 This specification covers pipe sizes in schedules shown in Table 1. 1.3 ASTM International has adopted definitions whereby some grades, such as UNS N08904, previously in this...
1.1 This specification covers UNS N08034, UNS N08354, and UNS N08935 seamless, cold-worked or hot-finished pipe and tube intended for general corrosive service. 1.2 ASTM International has adopted definitions whereby some grades, such as UNS N08904 previously in this specification, were recognized...
1.1 This specification covers rolled nickel-chromium-alum
1.1 These reference radiographs for gray iron castings consist of one set of illustrations of centerline shrinkage with severity levels 1 to 5 using three radiation source types as follows: 1.1.1 Volume I: Medium Voltage (Nominal 250 kVp) X-ray Reference Radiographs-Set of 5 severity levels...
1.1 These test methods cover the chemical analysis of glass sands. They are useful for either high-silica sands (99?%+?silica (SiO2)) or for high-alumina sands containing as much as 12?% to 13?% alumina (Al2O3). Generally nonclassical, these test methods are rapid and accurate. They include the...
This specification covers cast gray iron soil pipe and fittings for use in gravity flow plumbing, drain, waste and vent sanitary, and storm water applications. These pipe and fittings are not intended for pressure applications. The cast iron shall be produced by an established...
1.1 This specification covers the requirements for 28 grades of titanium and titanium alloy tubing intended for surface condensers, evaporators, and heat exchangers, as follows: 1.1.1 Grade 1-UNS R50250. Unalloyed titanium, 1.1.2 Grade 2-UNS R50400. Unalloyed titanium, 1.1.2.1 Grade 2H-UNS R50400....
1.1 This test method covers the determination of acid-soluble iron content in granular and powdered activated carbons using suitable analytical equipment. This test method involves extracting the iron with hydrochloric acid and quantifying it through analytical techniques appropriate...
1.1 This specification covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel...
This specification covers wrought heat-resisting alloy UNS N08330 in the form of billets and bars only for reforging. The material shall undergo chemical and product analysis and conform to the requirements as to chemical composition specified for carbon, manganese, phosphorus, sulfur, silicon,...
This specification covers unalloyed and alloyed tantalum rod and wire. The materials covered are: R05200, R05400, R05255, R05252, and R05240. These materials shall be made from vacuum-arc melted or electron-beam melted ingots or powder-metallurgy consolidated unalloyed tantalum. The chemical...
This specification covers polyester grade ethylene glycol. Sampled specimens shall undergo tests, for which the following chemical and physical requirements should be met: acidity (as acetic acid); aldehydes (acetaldehyde) content; appearance; chloride content; color (Pt-Co scale); glycols (as...
Narrow Your Results