loading
GMW3044 - Zinc Plating
October 1, 2017 - GMW

Material Description. This coating system must be free of hexavalent chromium, per GMW3059 requirements. The plating shall be shown on the part drawing. Table 1 lists the common plating thickness codes covered by this specification. It is recommended to use these common codes...

AMS2402F - ZINC PLATING
October 1, 1991 - SAE International

This specification covers the engineering requirements for electrodepositton of zinc and the properties of the deposit.

NAVISTAR MPAPS G-20 - Zinc Plating
October 1, 2020 - NAVISTAR
A description is not available for this item.
AMS2402E - ZINC PLATING
September 30, 1966 - SAE International
A description is not available for this item.
AMS2402D - ZINC PLATING
October 1, 1951 - SAE International
A description is not available for this item.
AMS2402C - ZINC PLATING
June 1, 1949 - SAE International
A description is not available for this item.
AMS2402A - ZINC PLATING
November 1, 1944 - SAE International
A description is not available for this item.
AMS2402B - ZINC PLATING
October 1, 1945 - SAE International
A description is not available for this item.
AMS2402 - ZINC PLATING
December 1, 1942 - SAE International
A description is not available for this item.
GMW3044 (J) - ZINC-PLATING
GMW
A description is not available for this item.
ISUZU ISC-B11-004 - ZINC PLATING AND ZINC ALLOY PLATING
ISUZU
A description is not available for this item.
NAVISTAR CEMS G-23 - VOID - Tin-Zinc Plating
April 1, 2015 - NAVISTAR
A description is not available for this item.
NAVISTAR MPAPS G-23 - Tin-Zinc Plating
December 1, 2014 - NAVISTAR
A description is not available for this item.
NAVISTAR CEMS G-20 - VOID - Zinc Plating
June 1, 2014 - NAVISTAR
A description is not available for this item.
FORD S-M1P3-A - CADMIUM AND ZINC PLATING
January 1, 1994 - FORD
A description is not available for this item.
HN 1168 - BRIGHT ZINC PLATING
HOLDEN
A description is not available for this item.
GMSA EMS 735 - OLIVE DRAB ZINC PLATING
GMSA
A description is not available for this item.
FORD M2B93-A - ZINC PLATING BATH CAUSTIC/BRIGHTENER
December 1, 1991 - FORD

1. SCOPE: The material defined by this standard is a combination, highly soluble, liquid caustic, with brightener enhancers and degassers.

GMW4700 - Zinc Alloy Plating
February 1, 2014 - GMW

Material Description. This specification covers the basic requirements for barrel or rack electrodeposited zinc alloy over a ferrous substrate. Various alloy platings with supplemental treatments are covered by this specification. This specification covers functional requirements only...

AMS2402L - Plating, Zinc
January 4, 2019 - SAE International

This specification covers the requirements for electrodeposited zinc plating.

Advertisement