loading
ASTM E557-12(2026) - Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions
April 1, 2026 - ASTM International

3.1 Rooms formed by operable partitions often need to be isolated acoustically. Sound-isolating properties of operable partitions are specified by architects in terms of sound transmission class (STC) and so advertised by the manufacturer on the basis of laboratory tests in accordance with Test...

ASTM F2840-26 - Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft
March 1, 2026 - ASTM International

3.1 This specification provides designers and manufacturers of electric propulsion for light sport aircraft design references and criteria to use in designing and manufacturing EPUs. 3.2 Declaration of compliance is based on testing and documentation during the design, ground testing and flight...

ASTM D5782-18(2026) - Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
March 1, 2026 - ASTM International

4.1 The application of direct air-rotary drilling to geoenvironmental exploration may involve sampling, coring, in situ or pore-fluid testing, installation of casing for subsequent drilling activities in unconsolidated or consolidated materials, and for installation of subsurface water-quality...

ASTM E3527-26 - Standard Guide for Preservation of Microorganisms
April 1, 2026 - ASTM International

1.1 There is an ongoing need to maintain, preserve, and standardize microbiological cultures for research. This guide is focused on three parts of microbe preservation: 1.1.1 Process Description-This includes detailed microbe characterization data and documentation of microbial passaging,...

ASTM E336-25a - Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
November 1, 2025 - ASTM International

1.1 The sound isolation between two spaces in a building is influenced most strongly by a combination of the direct transmission through the separating partition between the spaces (as normally measured in a laboratory) and any transmission along a number of indirect paths, referred to as...

ASTM F1870-26 - Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
January 1, 2026 - ASTM International

1.1 This is a fire-test-response guide. 1.2 This guide is intended to provide guidance for the selection of test methods that are applicable to determining fire-test-response characteristics of upholstered furniture items contained within a detention cell. 1.3 This guide is intended for use by...

ASTM F3809-26 - Standard Test Method for Assessment of Fire Behavior of Mattresses in Detention and Correctional Facilities by Mass Loss
January 1, 2026 - ASTM International

1.1 This is a fire-test-response standard. 1.2 This test method covers a means of measuring mass loss and fire behavior (and, optionally, smoke obscuration), from mattresses intended for detention or correctional facilities, by igniting the mattress, or mattress insert, with sheets of newspaper. 1...

ASTM F3794-25 - Standard Practice for Multivariate Fit and Accommodation for Exoskeleton Manufacturers and Designers
November 1, 2025 - ASTM International

1.1 The design and engineering of an exoskeleton is expensive. Therefore, designs typically fit more than one person; think one-size-fits-most or an exoskeleton provided in multiple sizes (for example, small, medium, and large). However, to accurately fit and accommodate a specific design range of...

ASTM E2881-25 - Standard Test Method for Extraction and Derivatization of Fatty Acid-Based Products from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry
November 1, 2025 - ASTM International

1.1 This test method covers the extraction, base-catalyzed derivatization, and identification of fatty acids indicative of vegetable oils and fats in fire debris and liquid samples. This procedure will also extract animal oils and fats, as these are similar in chemical composition to vegetable oils...

ASTM D8623-25 - Standard Practice for Environmental Odor Screening for Single, Character-Defining Odorants; Using Gas Chromatography-Mass Spectrometry Olfactometry (GC-MS-O) Analysis and On-Instrument Odor-Matching Confirmation
October 1, 2025 - ASTM International

5.1 Historically, environmental odor issues have been assumed to be inherently complex with respect to chemical composition. However, environmental odor issues are often driven by relatively small subsets of odorants from otherwise complex source emissions; in extreme cases, driven by single...

ASTM E336-25 - Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
August 1, 2025 - ASTM International

1.1 The sound isolation between two spaces in a building is influenced most strongly by a combination of the direct transmission through the separating partition between the spaces (as normally measured in a laboratory) and any transmission along a number of indirect paths, referred to as...

ASTM D865-11(2025) - Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)
July 1, 2025 - ASTM International

1.1 This test method covers a procedure to determine the deterioration induced by heating rubber specimens in individual test tube enclosures with circulating air. This isolation prevents cross contamination of compounds due to loss of volatile materials (for example, antioxidants) and their...

ASTM D8384-25 - Standard Practice for Extraction of Water-Soluble Amines from Crude Oils
July 1, 2025 - ASTM International

5.1 Amine-based scavengers are commonly used to abate sour gas from hydrocarbon streams via a stoichiometric reaction with hydrogen sulfide. Some of these amines can contribute to downstream amine-chloride corrosion and fouling of crude oil fractionation towers and overhead condensers. The...

ASTM E1007-25 - Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
August 1, 2025 - ASTM International

1.1 This test method covers the measurement of the transmission of impact sound generated by a standard tapping machine through floor-ceiling assemblies and associated supporting structures in field situations. 1.2 Results are measurable for all types of floor-ceiling assemblies, including those...

ASTM E492-25 - Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
August 15, 2025 - ASTM International

5.1 The spectrum of the noise in the room below the test specimen is determined by the following: 5.1.1 The size and the mechanical properties of the floor-ceiling assembly, such as its construction, surface, mounting or edge restraints, stiffness, or internal damping, 5.1.2 The acoustical response...

ASTM D5783-18(2025) - Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
July 1, 2025 - ASTM International

4.1 Direct-rotary drilling may be used in support of geoenvironmental exploration and for installation of subsurface water-quality monitoring devices in unconsolidated and consolidated materials. Direct-rotary drilling may be selected over other methods based on advantages over other methods. In...

ASTM D5872/D5872M-18(2025) - Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
July 1, 2025 - ASTM International

4.1 Casing advancement may be used in support of geoenvironmental exploration and for installation of subsurface water-quality monitoring devices in both unconsolidated and consolidated sediment. Casing advancement systems and procedures used for geoenvironmental exploration and instrumentation...

ASTM E2047-10(2025) - Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
June 1, 2025 - ASTM International

5.1 The design of a PV module or system intended to provide safe conversion of the sun's radiant energy into useful electricity must take into consideration the possibility of hazard should the user come into contact with the electrical potential of the array. In addition, the insulation system...

ASTM F2100-25 - Standard Specification for Performance of Materials Used in Medical Face Masks
May 1, 2025 - ASTM International

1.1 This specification covers testing and requirements for materials used in the construction of medical face masks that are used in providing healthcare services such as surgery and patient care. 1.1.1 This specification addresses medical masks with ties (surgical masks) and ear loops (procedure...

ASTM E2846-20(2025) - Standard Guide for Thermocouple Verification
May 1, 2025 - ASTM International

1.1 This guide describes tests that may be applied to new or previously used thermocouples for the purpose of verification. Some of the tests perform a suitable verification by themselves, but many tests merely alert the user to serious problems if the thermocouple fails the test. Some of the tests...

Advertisement