This test method covers the procedures for the standard practice of performing magnetic particle examination of continuous grain flow crankshaft forgings intended for medium speed diesel engines. Crankshafts shall be divided into four zones of decreasing operational stress, each of which have been...
4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...
1.1 This practice covers guidelines for acoustic emission (AE) examinations of non-pressure, paper machine rolls. 1.2 This practice utilizes a slow rotation of the roll to produce a full load cycle where load is provided by the weight of the roll suspended from its bearings or other journal...
5.1 APC is the foundation to smart manufacturing. Smart manufacturing has emerged as one key concept as the industry transitions to an Industry 4.0 paradigm. FDA has also recognized this industry trend and published a perspective paper on Industry 4.0 in the International Journal of...
1.1 Undesirable timing-chain wear has been observed with gasoline, turbocharged, direct-injection (GTDI) engines in field service, and data from correlating laboratory engine tests have shown that chain wear can be affected by appropriately formulated engine lubricating. A laboratory engine test...
Narrow Your Results