5.1 General Utility: 5.1.1 This practice is suitable for research, quality control, specification testing and process control. 5.1.2 It is useful to define and verify the reactivity of non-foam polyurethane formulations. 5.2 Limitations: 5.2.1 Operator-to-operator
1.1 This test method covers the determination of Bromine Index in aromatic hydrocarbons, their derivatives, and related chemicals. 1.2 This test method is applicable to samples with Bromine Index concentrations to 100 Bromine Index. The limit of detection (LOD) is for 1.5 Bromine Index and the...
5.1 This test method can be used to determine in-place density of topsoil and blended soils prior to planting or in the development of a maintenance programs for natural turf sports fields, planting areas, lawns and golf courses. 5.2 This test method can provide builders and maintenance staff with...
1.1 These practices cover laboratory procedures for preparing a solvent or water based ink resin solution in low boiling solvent or alkaline water using two types of lab equipment; (1) an industrial blender (Sections 3 - 7), and (2) a laboratory roller mill (Sections 8 - 12). Note 1: ASTM...
5.1 This practice is specifically designed to describe simple robust statistical methods for use in proficiency testing programs. 5.2 Proficiency testing programs can use the methods in this practice for the purpose of comparing testing results obtained from a group of participating laboratories....
1.1 These practices describe laboratory procedures for preparing an oil-based ink resin solution in a high-boiling solvent using four pieces of lab equipment: (1) A hot oil bath (Sections 4 to 11), (2) A stirrer/hot plate (Sections 12 to 16), (3) An industrial blender (Sections 17 to 22),...
1.1 This specification establishes minimum characteristics for those factors that determine particle size, consistency, purity, and ability to drain. 1.2 Engineered wood fiber that meets the requirements of this specification must comply with Specification F1292, if the surface is in the use zone...
1.1 This practice provides recommended procedures for sampling synthetic turf fiber and finished fabric in a manufacturing location for further testing to identify and quantify per- and polyfluoroalkyl substances (collectively hereafter referred to as PFAS) in synthetic turf fiber and fabric. 1.2...
1.1 Equine surfaces containing wax-oil based coatings/binders must be treated and cleaned prior to the subsequent material tests described for sand and fiber surfaces. Note: skip this test for surfaces that are not wax coated. 1.2 The procedures described for wax separation employ Soxhlet...
1.1 This guide covers procedures for using the ASTM Standard Reference Blacks (SRBs) reference materials, the HT and INR (Iodine Number Reference) Iodine Number reference materials and, the High Nitrogen Surface Area (HNSA) reference materials, to continuously monitor the precision of those carbon...
5.1 This practice can be used to establish the validity of the results obtained by an infrared (IR) spectrophotometer or Raman spectrometer at the time the calibration is developed. The ongoing validation of PPTMRs produced by analysis of unknown samples using the multivariate model is covered...
1.1 Purpose: 1.1.1 The purpose of this test method is to quantitatively assess how much a back exoskeleton affects low back loading (musculoskeletal forces in the lumbar region of the back) and low back disorder (LBD) risk. LBDs refer to a broad range of medical conditions, injuries, or issues of...
Narrow Your Results