loading
ASTM D6400-26 - Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities
June 1, 2026 - ASTM International

1.1 This specification covers plastics and products made from plastics that are designed to be composted under aerobic conditions in municipal and industrial aerobic composting facilities, where thermophilic conditions are achieved. 1.2 This specification is intended to establish the requirements...

ASTM F2388-21(2026) - Standard Consumer Safety Specification for Baby Changing Products for Domestic Use
July 1, 2026 - ASTM International

1.1 This consumer safety specification covers performance requirements, test methods, and labeling requirements to promote the safe use of baby changing products including changing tables, changing table accessories, contoured changing pads, and add-on changing units. 1.2 This specification...

ASTM D7611/D7611M-26 - Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
July 1, 2026 - ASTM International

4.1 Resin Identification Codes are used solely to identify the plastic resin used in a manufactured article. The intended manufactured articles include, but are not limited to, packaging. 4.1.1 Fig. 1 and Table 1 present the appropriate information on the way the RIC is to be incorporated onto the...

ASTM D4236-26 - Standard Practice for Labeling Art Materials for Chronic Health Hazards
January 1, 2026 - ASTM International

This practice describes the standard procedure for developing precautionary labels for art materials to provide chronic health hazard and precautionary statements based on knowledge that exists in the scientific and medical communities. These statements concern hazards known to be associated...

ASTM D6688-20(2026) - Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique
June 1, 2026 - ASTM International

4.1 Many types of printed matter, notably container labels, packaging materials, magazine and book covers, must be resistant to liquid materials that may contact them advertently or inadvertently. This practice permits an assessment of resistance of printed matter to several types of liquids...

ASTM F3679-26 - Standard Consumer Safety Specification for Commercial Electric-Powered Scooters for Adults
July 1, 2026 - ASTM International

1.1 This consumer safety specification covers the establishment of performance requirements and corresponding test methods used to minimize the hazards to users of electric-powered scooters for rent or lease by multiple users but not individually owned units. For example, electric-powered scooters...

ASTM F2598-22(2026) - Standard Consumer Safety Specification for Sealed Storage Chests such as Cedar Chests, Hope Chests, Blanket Chests, Keepsake Chests
July 1, 2026 - ASTM International

1.1 This consumer safety specification covers the performance requirements and test methods to ensure the safety of chests. 1.2 This consumer safety specification is intended to minimize the incidents and injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of...

ASTM F3728-26 - Standard Specification for Release Characteristics of Ski-Binding-Boot (S-B-B) Systems for Recreational Skiing
July 1, 2026 - ASTM International

1.1 This specification covers the required release and retention characteristics of ski-binding-boot (S-B-B) systems. This specification is applicable to all recreational snow skiing bindings that have safety release mechanisms. Specifically, this performance standard establishes the minimum...

ASTM E3215-19a(2026) - Standard Practice for Certification of Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers
June 1, 2026 - ASTM International

1.1 This practice establishes the certification requirements for less lethal aerosol devices used by law enforcement, corrections officers, and other public safety officers. 1.1.1 This practice is intended to be used by certification bodies and by purchasers and suppliers in the procurement of less...

ASTM F2503-26 - Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
May 1, 2026 - ASTM International

4.1 Interactions of items with the MR environment have resulted in serious injuries and death of patients and other individuals. This practice lists hazards that may be present in the MR environment. It specifies marking of items anticipated to enter the MR environment and recommends information...

ASTM E2905/E2905M-26 - Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
July 1, 2026 - ASTM International

Note 1: Throughout the practice, "gear" means gear or pinion unless the gear is specifically identified. 1.1 This practice describes a two-part procedure for examination of gear teeth on mill and kiln gear drives and pinions using eddy current array (ECA) methods. The first part of this practice...

ASTM F3176-20(2026) - Standard Specification for Special Needs Shopping Carts
June 1, 2026 - ASTM International

1.1 This standard covers performance requirements, test methods, and marking/labeling requirements for special needs shopping carts. 1.2 This standard is intended to address special needs shopping carts for use by children and adults with special needs. 1.3 This standard does not include any...

ASTM E3347/E3347M-26 - Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
June 1, 2026 - ASTM International

1.1 This standard specifies minimum performance requirements and test methods for the ballistic resistance of shields used by U.S. law enforcement officers to protect against handgun and rifle ammunition. 1.1.1 The option for testing either handgun-rated or rifle-rated shields with a shotgun threat...

ASTM F3095-17a(2026) - Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System
June 1, 2026 - ASTM International

1.1 This practice covers the procedure for the post installation verification and acceptance of buried pipe deformation using a visible rotating laser light diode(s), a pipeline and conduit inspection analog or digital CCTV camera system and image processing software. The combination CCTV pipe...

ASTM F2573-06(2026) - Standard Specification for Low Velocity Resilient Material Projectile
May 1, 2026 - ASTM International

This specification covers critical characteristics of low velocity resilient material projectiles made from a resilient material. Material diameter, shape, projectile hardness, and weight shall conform to the dimensions indicated in this specification. This specification establishes minimum warning...

ASTM F3080-21(2026) - Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector, Infrared Measurement, and CCTV Camera System
June 1, 2026 - ASTM International

1.1 Laser profiling is a non-contact inspection method used to create a pipe wall profile and internal measurement using a standard CCTV pipe inspection system, 360° laser light projector, a measurement by means of infrared sensors and geometrical profiling software. This practice covers the...

ASTM C1468-19a(2026) - Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
June 1, 2026 - ASTM International

1.1 This test method covers the determination of transthickness tensile strength under monotonic uniaxial tensile loading of continuous fiber-reinforced ceramics (CFCC) at ambient temperature. This test method addresses, but is not restricted to, various suggested test specimen geometries, test...

ASTM F1449-20(2026) - Standard Guide for Industrial Laundering Care and Maintenance of Flame Resistant or Arc Rated Clothing
May 1, 2026 - ASTM International

1.1 This guide provides recommendations for the care and maintenance of clothing that is flame resistant or arc rated. 1.2 These recommendations address the industrial laundering process. Industrial laundering is an effective cleaning process for flame resistant or arc rated clothing; follow all...

ASTM F2574-06(2026) - Standard Specification for Low Velocity Projectile Marker
May 1, 2026 - ASTM International

This specification covers low velocity projectile (LVP) markers that eject a low velocity resilient material (LVRM) projectile using compressed air, compressed gas, or a combination of both. Included in this specification are performance requirements and test methods for LVP markers as well as the...

ASTM F2757-20(2026) - Standard Guide for Home Laundering Care and Maintenance of Flame Resistant or Arc Rated Clothing
May 1, 2026 - ASTM International

1.1 This guide provides recommendations for home laundering of clothing that is flame resistant or arc rated. These recommendations address the home laundering process. Home laundering is an effective cleaning process for flame resistant or arc rated garments; follow all label care...

Advertisement