1.1 This test method covers the determination of the formic acid (and other reducing substances) content of glacial acetic acid by oxidation with lead tetraacetate. 1.2 For purposes of determining conformance of an observed or a calculated value using this test...
1.1 This specification establishes minimum characteristics for those factors that determine particle size, consistency, purity, and ability to drain. 1.2 Engineered wood fiber that meets the requirements of this specification must comply with Specification F1292, if the surface is in the use zone...
5.1 Ultrasonic extraction using dilute nitric acid is a simpler and easier method for extracting lead from environmental samples than are traditional digestion methods that employ hot plate or microwave digestion with concentrated acids (3), (5), (7), (8). Hence, ultrasonic...
1.1 This test method covers the determination of lead and cadmium extracted by acetic acid from the lip and rim area of glassware used for drinking and which is exteriorly decorated with ceramic glass enamels. The procedure of extraction may be expected to accelerate the...
1.1 This practice provides considerations for the in vitro assessment of cellular responses to wear particles and degradation products from medical device materials with direct or indirect contact with tissues that may lead to a cascade of biological responses resulting in damage to adjacent...
5.1 This practice is intended for the digestion of lead in dust wipe samples collected during various lead hazard activities performed in and around buildings and related structures. 5.2 This practice is also intended for the digestion of lead in dust wipe samples collected...
5.1 There is a need to monitor the lead content in and around buildings and related structures in order to determine the potential lead hazard. Hence, effective and efficient methods are required for the preparation of soil samples for determination of their lead content. 5.2...
1.1 This test method covers the precise determination of lead and cadmium extracted by acetic acid from glazed ceramic surfaces. The procedure of extraction may be expected to accelerate the release of lead from the glaze and to serve, therefore, as a severe test...
1.1 This test method covers the determination of lead and cadmium extracted by acetic acid from the lip and rim area of glassware used for drinking and which is exteriorly decorated with ceramic glass enamels. The procedure of extraction may be expected to accelerate the...
1.1 The purpose of this guide is to provide standard methods for the safe use of lithium ion (Li-ion) batteries onboard vessels. The guidelines in this document were developed primarily for larger Li-ion marine battery installations, such as for propulsion or ships service electrical...
1.1 This test method covers procedures for using graphite furnace atomic absorption spectroscopy (GFAAS) to quantitatively determine lead and cadmium extracted by acetic acid at room temperature from the food-contact surface of foodware. The method is applicable to food-contact...
1.1 When conducting test methods, it is important to consider the role that the environmental conditions play in measurement of exoskeleton safety and performance. Exoskeletons are designed to be operated both indoors and outdoors under conditions specified by the manufacturer. Likewise, end...
1.1 This test method covers the determination of the composition and monomer sequence of alginate intended for use in biomedical and pharmaceutical applications as well as in tissue engineered medical products (TEMPs) by high-resolution proton NMR (1H NMR). A guide for the characterization...
1.1 This test method covers the precise determination of lead and cadmium extracted by acetic acid from porcelain enamel surfaces. 1.2 Values stated in SI units are to be regarded as the standard. Inch-pound units are given for information only. 1.3 This standard does not...
1.1 This test method2 covers the determination of the mineral-acid-insoluble matter content of copper and iron powders in amounts under 1.0?%. 1.2 Units-With the exception of the values for density and the mass used to determine density, for which the use of the gram per cubic...
1.1 This practice describes the partial digestion of solid waste using nitric acid for the subsequent determination of the total recoverable content of inorganic constituents. 1.2 This practice is to be used when the concentrations of total recoverable elements are to be determined from a...
Narrow Your Results