1.1 This specification covers tin and tin/lead coatings applied by the hot dip process on ferrous and non-ferrous metals. Hot tin and tin/lead coatings are used to provide a low contact-resistance surface, to protect against corrosion, to facilitate soldering, to provide anti-galling...
1.1 This terminology covers definitions for the following: 1.1.1 Terms that are commonly used in the field of management of lead hazards in facilities; 1.1.2 Architectural terms, particularly those associated with older buildings; and, 1.1.3 Specialized terms that may be encountered by users...
1.1 This terminology covers definitions for the following: 1.1.1 Terms that are commonly used in the field of management of lead hazards in facilities; 1.1.2 Architectural terms, particularly those associated with older buildings; and, 1.1.3 Specialized terms that may be encountered by users...
5.1 This guide is intended to help prevent lead poisoning of children by providing standardized procedures for conducting a lead hazard assessment and providing information needed to develop and recommend lead hazard control options as described in Practice E2252. 5.2 This...
1.1 This practice describes procedures for conducting visual assessments in buildings to visually identify the type and location of potential lead hazards. These potential hazards are associated with deteriorated leaded paint, lead in dust, or lead in soil. 1.2 This...
4.1 Plastic compositions containing salts of lead, cadmium, copper, antimony, and certain other metals (as stabilizers, pigments, driers, or fillers) may stain due to the formation of a metallic sulfide when in contact with external materials that contain sulfide. The external sulfide source...
1.1 This practice describes the selection of lead hazard reduction methods for controlling lead hazard risks identified during risk assessments of residential dwellings and child occupied facilities. 1.2 The values stated in SI units are to be regarded as standard. The values given in...
This specification covers wrought heat-resisting alloy UNS N08330 in the form of billets and bars only for reforging. The material shall undergo chemical and product analysis and conform to the requirements as to chemical composition specified for carbon, manganese, phosphorus, sulfur, silicon,...
1.1 This practice covers visual assessment for the presence of deteriorated paint, surface dust, painted debris, and paint chips with environmental sampling of surface dust to determine whether a lead hazard exists at the time of sample collection, or following lead-hazard reduction...
1.1 This specification covers four grades of red pigment commercially known as red lead. The pigment may be purchased in the dry form or as a paste in oil. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions...
This specification deals with refined silver cast bar form in three different grades as indicated by the degree of fineness of silver: Grade 99.90 (UNS P07020) which is also commonly referred to as commercial bar or bullion; Grade 99.95 (UNS P07015); and Grade 99.99 (UNS P07010). The material shall...
This specification deals with consumer safety for clothing storage chests. It is intended to minimize the incidents and injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of these chests. The design of the lid support, closures, and locks shall conform to...
1.1 This practice covers the use of commercial spot test kits based on either sulfide or rhodizonate anions for the qualitative determination of the presence of lead in dry paint films. 1.2 This practice may also be used as a qualitative procedure for other dry coating films such as...
This specification covers the general requirements for steel sheet in coils and cut length, metallic-coated on continuous lines by the hot-dip process. This material is intended for applications requiring corrosion resistance. Hot-dip metallic coatings are available in six different types: zinc and...
This guide covers standard specification for wrought-carbon steel butt-welding seamless or welded fittings specially processed to ensure better notch toughness. Heat treatment shall be required for all types of fittings. Fittings with mandatory radiographic examination of welds shall be included....
5.1 These test methods determine the concentration of lead (from alkyl addition) in gasoline. These alkyl additives improve the antiknock properties. 5.2 Test Method C is used to ensure compliance of trace lead as required by federal regulations for lead-free gasoline (40 CFR...
Narrow Your Results