loading
API SMART LEAK DETECTION - Smart Leak Detection and Repair (LDAR) for Control of Fugitive Emissions
June 1, 2004 - API

This report presents technology background and test results on an improved Leak Detection and Control method for application in refineries and petrochemical plants. Smart Leak Detection and Repair (LDAR) focuses on locating and repairing the most significant leaking components,...

ASTM E2024/E2024M-11(2026)e1 - Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
July 1, 2026 - ASTM International

5.1 These test methods are useful for locating and estimating the size of pressurized gas leaks, either as quality control tests or as field inspection procedures. Also, they are valuable as pretests before other more time consuming and more sensitive leak tests are employed. These...

ASTM E2930-26 - Standard Practice for Pressure Decay Leak Test Method
July 1, 2026 - ASTM International

5.1 The equipment, test duration, and technique should be determined before commencement of the test based on the required test sensitivity or accuracy (see Annex A1 and Annex A2). If the test is used to certify that the vessel has a maximum specified leakage rate, then the test equipment and test...

ASTM F2523-13(2026) - Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
June 1, 2026 - ASTM International

5.1 This practice may be used to determine the viability of an RTV sealant to withstand pressure leak testing before cure at maximum gap conditions of a system. This practice may be used to indicate an RTV's acceptability to undergo an assembly line leak check without causing a...

ASTM B673-26 - Standard Specification for Nickel-Iron-Chromium-Molybdenum-Nitrogen Alloy Welded Pipe
July 1, 2026 - ASTM International

This specification covers UNS N08925, UNS 8354, and UNS N08926 welded pipes of specific dimensions for general corrosion applications. The pipe shall be made from flat-rolled alloy by an automatic welding process with no addition of filler material. Class 1 and Class 2 material shall be cold worked...

ASTM E2128-26 - Standard Guide for Evaluating Water Leakage of Building Walls
July 1, 2026 - ASTM International

4.1 This guide is intended to provide building professionals with a comprehensive methodology for evaluating water leakage through walls. It addresses the performance expectations and service history of a wall, the various components of a wall, and the interaction between these components and...

ASTM F2164-26 - Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
February 1, 2026 - ASTM International

5.1 If required by the authority having jurisdiction, hydrostatic pressure leak testing may be conducted to discover and correct leaks or faults in a newly constructed or modified polyethylene or crosslinked polyethylene pressure piping system before placing the system in service....

ASTM D8265-26 - Standard Practices for Electrical Methods for Mapping Leaks in Installed Geomembranes
April 1, 2026 - ASTM International

1.1 These practices describe standard procedures for using electrical methods to locate leaks in geomembranes covered with liquid or earthen materials, or both. 1.2 These practices are intended to ensure that leak location surveys are performed to the highest technical capability of...

ASTM E911-98(2026) - Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
June 1, 2026 - ASTM International

This specification covers dimensional interchangeability requirements of glass stopcocks with polytetrafluoroethylene (PTFE) plugs for use in ordinary laboratory and industrial applications. However, it does not cover the design characteristics of the stopcock-plug assembly nor the physical or...

ASTM F3535-26 - Standard Practice for Field Leak Testing of Polyamide-12 (PA12) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
February 1, 2026 - ASTM International

5.1 If required by the authority having jurisdiction, pressurized gaseous testing media leak testing is conducted after installation to discover and correct or repair leaks or faults in a newly constructed or modified PA12 pressure piping system before placing the system in service....

ASTM F2786-26 - Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
February 1, 2026 - ASTM International

5.1 If required by the authority having jurisdiction, pressurized gaseous testing media leak testing is conducted after installation to discover and correct or repair leaks or faults in a newly constructed or modified polyethylene pressure piping system before placing the system in...

ASTM F91-06(2026) - Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
July 1, 2026 - ASTM International

1.1 This practice covers the testing of the integrity of high-efficiency particulate air (HEPA) filters installed in laminar flow clean rooms of the ceiling to floor or wall to wall type, and laminar flow clean work stations. The recommended practice may be used to detect faults or voids in the...

ASTM E1316-26a - Standard Terminology for Nondestructive Examinations
March 15, 2026 - ASTM International

1.1 This standard covers the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gamma- and X-radiology, leak testing, liquid penetrant testing, magnetic...

ASTM E569/E569M-26 - Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
May 1, 2026 - ASTM International

This practice provides guidelines for acoustic emission (AE) examination or monitoring of structures, such as pressure vessels, piping systems, or other structures that can be stressed by mechanical or thermal means. The basic functions of an AE monitoring system are to detect, locate, and classify...

ASTM E1316-26 - Standard Terminology for Nondestructive Examinations
March 1, 2026 - ASTM International

1.1 This standard covers the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gamma- and X-radiology, leak testing, liquid penetrant testing, magnetic...

ASTM E1209-18(2026) - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
May 1, 2026 - ASTM International

1.1 This practice covers procedures for water-washable fluorescent penetrant testing of materials. It is a nondestructive testing method for detecting discontinuities that are open to the surface such as cracks, seams, laps, cold shuts, laminations, isolated porosity, through leaks, or lack...

ASTM E2256-26 - Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service
May 1, 2026 - ASTM International

1.1 This guide is intended to provide the reader with a knowledge of construction examination procedures and current technologies that can be used to give an owner or operator of an aboveground storage tank (AST) in petroleum service, relevant information on the hydraulic integrity of a new,...

ASTM F2981-15(2026) - Standard Test Method for Verifying Nonporous Flexible Barrier Material Resistance to the Passage of Air
April 1, 2026 - ASTM International

1.1 This test method is to be used to verify a specific material design property. Some flexible barrier materials are designed to have a resistance to the passage of air through the membrane structure. These materials are characterized as nonporous. This test method provides a means to verify this...

ASTM E1419/E1419M-26 - Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
May 1, 2026 - ASTM International

5.1 Because of safety considerations, regulatory agencies (for example, U.S. Department of Transportation) require periodic examinations of vessels used in transportation of industrial gases (see Section 49, Code of Federal Regulations). The AE examination has become accepted as an alternative to...

ASTM D7240-25 - Standard Practice for Electrical Leak Location Using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive-Backed Geomembrane Spark Test)
December 1, 2025 - ASTM International

1.1 This practice is a performance-based standard for an electrical method for locating leaks in exposed conductive-backed geomembranes. For clarity, this practice uses the term "leak" to mean holes, punctures, tears, knife cuts, seam defects, cracks, and similar breaches in an...

Advertisement