loading
ASTM D4814-26 - Standard Specification for Automotive Spark-Ignition Engine Fuel
July 1, 2026 - ASTM International

This specification describes the various characteristics and requirements of automotive fuels for use over a wide range of operating conditions in ground vehicles equipped with spark-ignition engines. It provides for a variation of the volatility and water tolerance of automotive fuel in accordance...

ASTM E2253-26 - Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
July 1, 2026 - ASTM International

1.1 This test method provides procedures for validating temperature and enthalpy measurements of differential scanning calorimeters (DSC) and analytical methods based upon the measurement of temperature or enthalpy (or heat), or both, by DSC. Performance parameters determined include temperature...

ASTM D5482-26 - Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)
May 1, 2026 - ASTM International

5.1 Vapor pressure is an important physical property of volatile liquids. 5.2 Vapor pressure is critically important for both automotive and aviation gasolines, affecting starting, warm-up, and tendency to vapor lock with high operating temperatures or high altitudes. Maximum vapor pressure limits...

ASTM E3510-26 - Standard Terminology Relating to Trace Materials Analysis
June 1, 2026 - ASTM International

1.1 This terminology standard is a compilation of terms and corresponding de?nitions related to the analysis of Trace Materials, including but not limited to fibers, glass, hair, paint, tape, and geological materials. Legal or scienti?c terms that are generally understood or de?ned...

ASTM D323-26 - Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
May 1, 2026 - ASTM International

5.1 Vapor pressure is an important physical property of volatile liquids. This test method is used to determine the vapor pressure at 37.8?°C (100?°F) of petroleum products and crude oils with initial boiling point above 0?°C (32?°F). 5.2 Vapor pressure is critically important for both automotive...

ASTM E1605-26a - Standard Terminology Relating to Lead in Buildings
April 1, 2026 - ASTM International

3.1 The purpose of this terminology standard is to help users understand and apply the large number of specialized terms used in connection with the management of lead hazards by providing a single, comprehensive, and consistent terminology. 3.1.1 This terminology standard includes some terms that...

ASTM E2548-26 - Standard Practice for Sampling Seized Drugs for Qualitative and Quantitative Analysis
April 1, 2026 - ASTM International

4.1 This practice provides information for the sampling of seized-drug submissions. 4.2 The principal purpose of sampling in the context of this practice is to answer relevant questions about a population by examination of a portion of the population. For example: What is the net weight of the...

ASTM E3436-26 - Standard Guide for Cross-Cultural Consumer Product Testing
May 15, 2026 - ASTM International

3.1 As businesses and industries continue to expand globally, understanding unique consumer behavior and preferences across countries, regions, or cultures is critical for success. Implementing best practices, to design research and collect data and insights within and across countries or cultures,...

ASTM E2807-11(2026) - Standard Specification for 3D Imaging Data Exchange, Version 1.0
May 1, 2026 - ASTM International

1.1 This specification describes a data file exchange format for three-dimensional (3D) imaging data, known as the ASTM E57 3D file format, Version 1.0. The term "E57 file" will be used as shorthand for "ASTM E57 3D file format" hereafter. 1.2 An E57 file is capable of storing 3D point data, such...

ASTM F3062/F3062M-26 - Standard Specification for Aircraft Powerplant Installation
April 1, 2026 - ASTM International

1.1 This specification covers minimum requirements for the installation and integration of powerplant system units. 1.2 This specification is applicable to small aeroplanes as defined in the F44 terminology standard. Use of the term airplane is used throughout this specification and will mean...

ASTM E2271/E2271M-26 - Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
April 1, 2026 - ASTM International

4.1 A clearance examination of abatement areas and other areas associated with other lead-hazard control activities, or building maintenance or modification activities in multifamily dwellings having similar units, common areas or exterior sites is performed to determine that the clearance area is...

ASTM E1605-26 - Standard Terminology Relating to Lead in Buildings
March 1, 2026 - ASTM International

3.1 The purpose of this terminology standard is to help users understand and apply the large number of specialized terms used in connection with the management of lead hazards by providing a single, comprehensive, and consistent terminology. 3.1.1 This terminology standard includes some terms that...

ASTM E3345-26 - Standard Practice for Opinions on the Interpretation of Primer Gunshot Residue (pGSR) Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
February 1, 2026 - ASTM International

4.1 This practice is of use to persons who present opinions regarding primer gunshot residue analysis results and to provide guidance to those in the legal community who use such opinions. 4.2 This practice is intended to be used in conjunction with Practice E620, Test Method E1588, and...

ASTM D6008-26 - Standard Practice for Determining the Environmental Condition of Federal Property
April 1, 2026 - ASTM International

1.1 Purpose-The purpose of this practice is to define good commercial and customary practice in the United States for assessing the environmental condition of property (ECP) of federal real property. This practice applies to property under consideration for lease, excess and surplus property at...

ASTM E3452-26 - Standard Guide for Forensic Photogrammetry
February 1, 2026 - ASTM International

1.1 This guide covers basic information on conducting photogrammetric examinations as a part of forensic analysis. The intended audience is examiners in a laboratory or field setting, or both. 1.2 This guide is not intended to be used as a step-by-step practice for conducting a proper forensic...

ASTM D4814-25a - Standard Specification for Automotive Spark-Ignition Engine Fuel
December 15, 2025 - ASTM International

This specification describes the various characteristics and requirements of automotive fuels for use over a wide range of operating conditions in ground vehicles equipped with spark-ignition engines. It provides for a variation of the volatility and water tolerance of automotive fuel in accordance...

ASTM E2920-26 - Standard Guide for Recording Priority Occupational Injuries and Illnesses and Serious Injury or Fatality (SIF)-Related Serious Injuries/Illnesses and Fatalities
January 1, 2026 - ASTM International

1.1 In this guide, criteria are established for recording occupational injuries and illnesses to aid in continuously improving management systems; identifying and preventing serious injuries, illnesses, and fatalities; measuring safety performance; evaluating safety programs; and ensuring...

ASTM F3803-26 - Standard Guide for Applying Goods Movement Process Codes in Common Approaches to Transport Management
January 1, 2026 - ASTM International

5.1 This section elaborates how the GMPC may be used in the context of the two main approaches to managing the execution of transportation mentioned in 4.8. These elaborations do not go into every possible detail of these approaches. The purpose of the elaborations is to provide an outline of the...

ASTM D6756-25 - Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
October 1, 2025 - ASTM International

5.1 In the United States, high sulfur content (defined by the United States Environmental Protection Agency (USEPA)) middle distillate products and diesel fuel used for off-road purposes, other than aviation turbine fuel, are required by government agencies to contain red dye. The dye concentration...

ASTM E3502-25 - Standard Practice for Enterprise Risk Management (ERM)
September 15, 2025 - ASTM International

1.1 This practice establishes a structured framework for identifying, assessing, treating, monitoring, and communicating risk across an organization. It provides a common language and approach to risk that supports the integration of enterprise risk management (ERM) into governance, strategic...

Advertisement