1.1 This speci?cation covers minimum requirements for Powered Lift and Multicopter, within the scope of Specification F3851?-?26 Speci?cation for Light Sport Category Aircraft. Note 1: Referenced standards may have further limitations. 1.2 Units-The values given in this standard are in SI...
5.1 Visual interpretation of gear teeth condition, such as contact patterns, scuffing, and wear, differs from examination for surface-breaking cracks or early signs of macro-pitting. Guidance for visual interpretation of gear tooth condition is provided in ASNI/AGMA 1010-F14. 5.2 Eddy current array...
4.1 Adequate coating thickness (mil thickness) is necessary to protect polyurethane foam from the effects of ultraviolet degradation. This guide outlines general procedures for sampling and measuring the coating thickness by using slit or core samples. 4.2 Thickness of individual lifts of...
4.1 The test method was developed for determining the fracture resistance of asphalt mixtures. The fracture resistance can help differentiate asphalt mixtures whose service life might be compromised by cracking. The test method is generally valid for specimens that are tested at temperatures of...
3.1 This test method provides the criteria for a practical, reproducible test for assuring the proper life-cycle of self-rising or automatic-lifting seat mechanisms of chairs. 3.2 This test method should be considered suitable for the testing required for design purposes, manufacturing...
1.1 This guide provides information regarding masonry elements constructed at locations other than in-place. Prefabrication may occur on the jobsite or offsite and transported to the jobsite. This guide covers lintels, arches, sloped sills, spandrels, soffits, wall panels, and other masonry...
This specification covers a rigid wall, nonexpendable shelter constructed of aluminum-faced, nonmetallic honeycomb sandwich panels. Electrical continuity testing, water leakage and operational testing, performance testing, paint adhesion testing, packaging examination, thermal shock test, panel...
1.1 This standard provides guidance for inspection, maintenance and service for permanently installed indoor gymnasium equipment including ceiling suspended and wall mounted basketball backstops, ceiling suspended volleyball systems, gymnasium divider curtains, and wrestling mat lifting and...
1.1 This specification covers minimum flight characteristics and performance requirements for aircraft, and is applicable to aircraft capable of any wing-borne flight, semi-thrustborne flight, and thrustborne flight, or combinations thereof. Specifically, this version of the specification is...
1.1 This specification covers minimum requirements for primary aircraft structures critical to the safety of flight and is applicable to aircraft capable of wing-borne flight, semi-thrust-borne flight, thrust-borne flight or autorotation-borne flight. Specifically, this version of the specification...
1.1 This practice covers procedures for least cost (life cycle) analysis (LCA) of materials, systems, or structures proposed for use in the construction of concrete culvert, storm sewer, and sanitary sewer systems. Note 1: As intended in this practice, examples of analyses include, but are not...
1.1 This specification covers the performance, safety, and marking requirements for main lift rotors and anti-torque systems, including rotor speed limits, drive system design, warning systems, operational limitations, and documentation requirements. 1.2 Units-The values given in this...
1.1 This specification covers the requirements for light sport aircraft related to occupant safety as required by reference from integration standards. This specification covers areas such as external inertial loads, visibility, emergency evacuation, baggage restraint, occupant restraints (seat...
5.1 The process of coiling wire causes the wire to take on a curvature from the process of being mechanically deformed into a coiled geometry. The curvature in the wire is permanent unless the wire is straightened. It will affect how the coiled wire will react when it is subjected to additional...
4.1 The application of direct air-rotary drilling to geoenvironmental exploration may involve sampling, coring, in situ or pore-fluid testing, installation of casing for subsequent drilling activities in unconsolidated or consolidated materials, and for installation of subsurface water-quality...
1.1 This specification covers minimum flight characteristics and performance requirements for aircraft, and is applicable to aircraft capable of any wing-borne flight, semi-thrust-borne flight, and thrust-borne flight, or combinations thereof. Specifically, this version of the specification is...
5.1 This practice is intended for the collection of samples on surfaces for the subsequent measurement of target nonvolatile and semi-volatile organic chemicals. The practice is meant for use in the collection of samples that are of interest in hazard evaluation, exposure assessment, risk...
1.1 The purpose of this practice is to provide design and construction guidelines for contamination controlled facilities used in the assembly and integration of aerospace hardware. The guidelines herein are intended to ensure that the facilities, when used properly, will meet the cleanliness...
5.1 Ergonomic assessment tools are useful to safety professionals for quantifying LBD risks. However, there are currently no industry standards for assessing changes in LBD risk when a worker wears a back exoskeleton (also commonly referred to as a back-assist exoskeleton, back-support-exoskel
1.1 This specification covers minimum flight characteristics and performance requirements for aircraft, and is applicable to aircraft capable of wing-borne flight, semi-thrust-borne flight, and thrust-borne flight. Specifically, this version of the specification is focused on airplanes,...
Narrow Your Results