loading
ASTM E2905/E2905M-26 - Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
July 1, 2026 - ASTM International

5.1 Visual interpretation of gear teeth condition, such as contact patterns, scuffing, and wear, differs from examination for surface-breaking cracks or early signs of macro-pitting. Guidance for visual interpretation of gear tooth condition is provided in ASNI/AGMA 1010-F14. 5.2 Eddy current array...

ASTM F3840-26 - Standard Specification for Integration for Light Sport Powered Lift and Multicopter
July 1, 2026 - ASTM International

1.1 This speci?cation covers minimum requirements for Powered Lift and Multicopter, within the scope of Specification F3851?-?26 Speci?cation for Light Sport Category Aircraft. Note 1: Referenced standards may have further limitations. 1.2 Units-The values given in this standard are in SI...

ASTM D7119/D7119M-21(2026) - Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
May 1, 2026 - ASTM International

4.1 Adequate coating thickness (mil thickness) is necessary to protect polyurethane foam from the effects of ultraviolet degradation. This guide outlines general procedures for sampling and measuring the coating thickness by using slit or core samples. 4.2 Thickness of individual lifts of...

ASTM D7313-20(2026) - Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
July 1, 2026 - ASTM International

4.1 The test method was developed for determining the fracture resistance of asphalt mixtures. The fracture resistance can help differentiate asphalt mixtures whose service life might be compromised by cracking. The test method is generally valid for specimens that are tested at temperatures of...

ASTM F851-87(2026) - Standard Test Method for Self-Rising Seat Mechanisms
May 1, 2026 - ASTM International

3.1 This test method provides the criteria for a practical, reproducible test for assuring the proper life-cycle of self-rising or automatic-lifting seat mechanisms of chairs. 3.2 This test method should be considered suitable for the testing required for design purposes, manufacturing...

ASTM C901-26 - Standard Guide for Design and Installation of Prefabricated Masonry Elements
June 1, 2026 - ASTM International

1.1 This guide provides information regarding masonry elements constructed at locations other than in-place. Prefabrication may occur on the jobsite or offsite and transported to the jobsite. This guide covers lintels, arches, sloped sills, spandrels, soffits, wall panels, and other masonry...

ASTM E1976-26 - Standard Specification for Shelter, Tactical, Nonexpandable
March 15, 2026 - ASTM International

This specification covers a rigid wall, nonexpendable shelter constructed of aluminum-faced, nonmetallic honeycomb sandwich panels. Electrical continuity testing, water leakage and operational testing, performance testing, paint adhesion testing, packaging examination, thermal shock test, panel...

ASTM F3783-26 - Standard Guide for Inspections and Maintenance of Permanently Installed Indoor Gymnasium Equipment
May 1, 2026 - ASTM International

1.1 This standard provides guidance for inspection, maintenance and service for permanently installed indoor gymnasium equipment including ceiling suspended and wall mounted basketball backstops, ceiling suspended volleyball systems, gymnasium divider curtains, and wrestling mat lifting and...

ASTM F3793-26a - Standard Specification for Flight Characteristics and Performance
May 15, 2026 - ASTM International

1.1 This specification covers minimum flight characteristics and performance requirements for aircraft, and is applicable to aircraft capable of any wing-borne flight, semi-thrustborne flight, and thrustborne flight, or combinations thereof. Specifically, this version of the specification is...

ASTM F3828-26 - Standard Specification for Structures for Light Sport Category Aircraft
May 1, 2026 - ASTM International

1.1 This specification covers minimum requirements for primary aircraft structures critical to the safety of flight and is applicable to aircraft capable of wing-borne flight, semi-thrust-borne flight, thrust-borne flight or autorotation-borne flight. Specifically, this version of the specification...

ASTM C1131-26 - Standard Practice for Life Cycle Cost Analysis (LCCA) of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
May 1, 2026 - ASTM International

1.1 This practice covers procedures for least cost (life cycle) analysis (LCA) of materials, systems, or structures proposed for use in the construction of concrete culvert, storm sewer, and sanitary sewer systems. Note 1: As intended in this practice, examples of analyses include, but are not...

ASTM F3832-26 - Standard Specification for Rotors and Rotor Systems for Light Sport Helicopters
May 1, 2026 - ASTM International

1.1 This specification covers the performance, safety, and marking requirements for main lift rotors and anti-torque systems, including rotor speed limits, drive system design, warning systems, operational limitations, and documentation requirements. 1.2 Units-The values given in this...

ASTM F3813-26 - Standard Specification for Light Sport Category Aircraft Occupant Safety
May 1, 2026 - ASTM International

1.1 This specification covers the requirements for light sport aircraft related to occupant safety as required by reference from integration standards. This specification covers areas such as external inertial loads, visibility, emergency evacuation, baggage restraint, occupant restraints (seat...

ASTM F2754/F2754M-26 - Standard Test Method for Measurement of Camber, Cast, Helix, and Direction of Helix of Coiled Wire
April 1, 2026 - ASTM International

5.1 The process of coiling wire causes the wire to take on a curvature from the process of being mechanically deformed into a coiled geometry. The curvature in the wire is permanent unless the wire is straightened. It will affect how the coiled wire will react when it is subjected to additional...

ASTM D5782-18(2026) - Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
March 1, 2026 - ASTM International

4.1 The application of direct air-rotary drilling to geoenvironmental exploration may involve sampling, coring, in situ or pore-fluid testing, installation of casing for subsequent drilling activities in unconsolidated or consolidated materials, and for installation of subsurface water-quality...

ASTM F3793-26 - Standard Specification for Flight Characteristics and Performance
March 1, 2026 - ASTM International

1.1 This specification covers minimum flight characteristics and performance requirements for aircraft, and is applicable to aircraft capable of any wing-borne flight, semi-thrust-borne flight, and thrust-borne flight, or combinations thereof. Specifically, this version of the specification is...

ASTM D8569-26 - Standard Practice for Surface Sampling of Non-Volatile and Semi-Volatile Organic Chemicals for Worker Protection
January 1, 2026 - ASTM International

5.1 This practice is intended for the collection of samples on surfaces for the subsequent measurement of target nonvolatile and semi-volatile organic chemicals. The practice is meant for use in the collection of samples that are of interest in hazard evaluation, exposure assessment, risk...

ASTM F2973-25 - Standard Specification for Insulating Lifting Links for Load Lifting Equipment Working Near Energized Power Lines
September 1, 2025 - ASTM International

1.1 This specification covers insulating lifting links used for protection of workers positioning a load from accidental contact of the load lifting equipment with live electrical conductors, apparatus, and circuits. 1.2 This specification includes design, material, and testing...

ASTM E2217-12(2026) - Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
January 1, 2026 - ASTM International

1.1 The purpose of this practice is to provide design and construction guidelines for contamination controlled facilities used in the assembly and integration of aerospace hardware. The guidelines herein are intended to ensure that the facilities, when used properly, will meet the cleanliness...

ASTM F3773-25 - Standard Test Method for Assessing the Effect of Back Exoskeletons on Low Back Loading and Risk
November 1, 2025 - ASTM International

5.1 Ergonomic assessment tools are useful to safety professionals for quantifying LBD risks. However, there are currently no industry standards for assessing changes in LBD risk when a worker wears a back exoskeleton (also commonly referred to as a back-assist exoskeleton, back-support-exoskeleton,...

Advertisement