loading
ISA BTM-LINE AUTOMTN - Bottom-Line Automation
January 1, 2006 - ISA
A description is not available for this item.
API REPORT OF LINE PIPE - Report of Eastern and Western Hemisphere Production of Line Pipe
January 1, 2004 - API
A description is not available for this item.
IEEE POLE LINE HARDWARE - POLE LINE HARDWARE (C135)
IEEE
A description is not available for this item.
IEEE TRANSMISSION LINE - IEEE TRANSMISSION LINE CONSTRUCTION
IEEE
A description is not available for this item.
IEEE TRANS LINE MODELING - TRANSMISSION-LINE MODELING METHOD: TLM
IEEE
A description is not available for this item.
API REPORT OF LINE PIPE E - Report of Eastern Hemisphere Production of Line Pipe
January 1, 2000 - API
A description is not available for this item.
API REPORT OF LINE PIPE W - Report of Western Hemisphere Production of Line Pipe
January 1, 1999 - API
A description is not available for this item.
ASTM D5930-26 - Standard Test Method for Thermal Conductivity of Plastics by Transient Line-Source Technique
July 1, 2026 - ASTM International

5.1 The relative simplicity of the test method makes it applicable for a wide range of materials (4, 5). The technique is capable of fast measurements, making it possible to take data before the materials suffer thermal degradation. Alternatively, it is possible to study the effect of compositional...

ASTM E3168-20a(2026) - Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters
July 1, 2026 - ASTM International

4.1 This practice is used to evaluate the ability of a radiographic interpreter to discriminate low contrast slit images in a radiographic interpretation environment. A radiographic viewer, as described in Specification E1390, and a viewing environment, as described in Guide E94/E94M, are strongly...

ASTM D2624-26 - Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
July 1, 2026 - ASTM International

1.1 These test methods cover the determination of the electrical conductivity of aviation and distillate fuels with and without a static dissipator additive. The test methods normally give a measurement of the conductivity when the fuel is uncharged, that is, electrically at rest (known as the rest...

ASTM D7997-21(2026) - Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
July 1, 2026 - ASTM International

5.1 General Utility: 5.1.1 This practice is suitable for research, quality control, specification testing and process control. 5.1.2 It is useful to define and verify the reactivity of non-foam polyurethane formulations. 5.2 Limitations: 5.2.1 Operator-to-operator variability and lab-to-lab...

ASTM F2468-05(2026) - Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
June 1, 2026 - ASTM International

4.1 The purpose of this classification system is to provide a method of adequately identifying silicone adhesives and sealants through the use of a line call-out designation. 4.2 This classification system was designed to permit the addition of property values for future silicone adhesives...

ASTM F2523-13(2026) - Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
June 1, 2026 - ASTM International

5.1 This practice may be used to determine the viability of an RTV sealant to withstand pressure leak testing before cure at maximum gap conditions of a system. This practice may be used to indicate an RTV's acceptability to undergo an assembly line leak check without causing a leak path due...

ASTM A390-06(2026) - Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
April 1, 2026 - ASTM International

1.1 This specification covers zinc-coated fence fabric intended for enclosure of poultry, or to prevent entry into special areas. It is available in three styles as: 1.1.1 Poultry Netting, consisting of a mesh of woven wire with openings hexagonal in shape, 1.1.2 Poultry-and-Garden Fence Fabric,...

ASTM F21-20(2026) - Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
July 1, 2026 - ASTM International

5.1 The atomizer test as described in this test method is rapid, nondestructive, and may be used for control and evaluation of processes for the removal of hydrophobic contaminants. The test may also be used for the detection and control of hydrophobic contaminants in processing environments. For...

ASTM D6110-26 - Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
July 1, 2026 - ASTM International

5.1 Before proceeding with this test method, refer to the material specification for the material being tested. Any test specimen preparation, conditioning, dimensions and testing parameters required by the materials specification shall take precedence over those required by this test method. Table...

ASTM D4935-18(2026) - Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials
June 1, 2026 - ASTM International

4.1 This test method applies to the measurement of SE of planar materials under normal incidence, far-field, plane-wave conditions (E and H tangential to the surface of the material). 4.2 The uncertainty of the measured SE values is a function of material, mismatches throughout the transmission...

ASTM C283-13(2026) - Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid
May 1, 2026 - ASTM International

2.1 Test Method A provides the producers of porcelain enameled utensils with a quality control method of testing for resistance to boiling acid for parts randomly selected from the production line. 2.2 Test Method B provides the supplier of porcelain enamel raw materials with a laboratory...

Advertisement