This comprehensive review of calibration provides an excellent foundation for understanding principles and applications of the most frequently performed tasks of a technician. Topics addressed include terminology, bench vs. field calibration, loop vs. individual instrument...
1.1 This practice covers guidelines for acoustic emission (AE) examinations of new and in-service aboveground storage tanks of the type used for storage of liquids. 1.2 This practice will detect acoustic emission in areas of sensor coverage that are stressed during the course of the...
1.1 This practice covers handling, mixing, and conditioning procedures that are required to ensure that a representative sample of the liquid petroleum or petroleum product is delivered from the primary sample container or container or both into the analytical apparatus or into intermediate...
4.1 From a quality risk management perspective (ICH Q9), extraneous solid and insoluble particulate matter in a final parenteral drug product is a potential hazard that may cause harm to the patient receiving the drug product in addition to potentially reducing drug product quality, efficacy, and...
1.1 Test Packages-Packages that can be nondestructively evaluated by this test method include: 1.1.1 Rigid and semi-rigid non-lidded trays. 1.1.2 Trays or cups sealed with porous barrier lidding material. 1.1.3 Rigid, nonporous packages. 1.1.4 Flexible, nonporous packages. 1.2 Leaks Detected-This...
1.1 This test method covers the determination of trace peroxides in various hydrocarbon streams. A list of typical hydrocarbon streams can be found in Appendix X2. 1.2 This test method is applicable to the determination of peroxides in petroleum liquids including, but not limited to,...
1.1 This test method covers procedures for the determination of kinematic viscosity of liquid asphalts, road oils, and distillation residues of liquid asphalts all at 60?°C [140?°F] and of liquid asphalt binders at 135?°C [275?°F] (see table notes, 11.1) in the range from 6 to...
5.1 A key aspect in understanding the thermal performance of cryogenic insulation systems is to perform tests under representative and reproducible conditions, simulating the way that the materials are actually put together and used in service. Therefore, a large temperature differential across the...
1.1 This test method covers the determination of trace peroxides in various hydrocarbon streams. A list of typical hydrocarbon streams can be found in Appendix X2. 1.2 This test method is applicable to the determination of peroxides in petroleum liquids including, but not limited to,...
1.1 This test method evaluates an engine oil's resistance to aeration in automotive diesel engine service. It is commonly referred to as the Caterpillar-C13 Engine-Oil Aeration Test (COAT). The test is conducted under high-engine-speed (1800?r/min), zero-load conditions using a specified...
1.1 This test method covers procedures for the determination of kinematic viscosity of liquid asphalts, road oils, and distillation residues of liquid asphalts all at 60?°C [140?°F] and of liquid asphalt binders at 135?°C [275?°F] (see table notes, 11.1) in the range from 6 to...
1.1 This practice covers procedures for calibrating leak artifacts of a specified gas, that may be used for determining the response of leak detectors, or in other situations where a known small flow of gas is required. The purpose of this practice is to establish calibration without...
5.1 This test method is intended for use in the laboratory or in the field to evaluate the cleanliness of distillate fuels, and liquid biofuels, such as biodiesel and diesel blends. This specific test method and the precision statement applies to off-line analysis. Note 5: These PCMs can be...
5.1 This bench test method is intended to produce comparable oil aging characteristics to those obtained with ASTM TMC Sequence IIIGA matrix reference oils 434, 435, and 438 after aging in the Sequence IIIG engine test. 5.2 To the extent that the method generates aged oils comparable to those from...
This document specifies procedures for the following: a) primary particle-sizing calibration for particle sizes 1 μm(c) and larger, sensor resolution and counting performance of liquid automatic particle counters that are capable of analysing bottle samples; b) secondary...
1.1 This test method is for the separation of lipids in liposomal formulations through high performance liquid chromatography (HPLC) and their quantitation using a mass-flow sensitive charged aerosol detector (CAD). 1.2 This test method is specifically for liposomal formulations...
1.1 This guide provides information on emerging in-process monitoring sensors, sensor configurations, sensor data analysis, and sensor data uses for the laser powder bed fusion additive manufacturing process. 1.2 The sensors covered produce data related to and affected by feedstock, processing...
Narrow Your Results