loading
MPIF LIQUID SINTERING - LIQUID PHASE SINTERING
MPIF
A description is not available for this item.
ASTM E3469-26 - Standard Practice for Validating End-User Sterilizing Filtration of Pharmaceutical, Biopharmaceutical, and Biological Products
April 1, 2026 - ASTM International

4.1 This practice may be used to evaluate the microbial retentivity of any membrane filter used for liquid sterilization where validation is required in the manufacturing of pharmaceutical, biopharmaceutical, and biological products or their intermediates (where applicable). These processes...

ASTM A437/A437M-26 - Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
February 1, 2026 - ASTM International

This specifications covers alloy-steel bolting material specially heat treated for high-temperature service, such as steam turbine, gas turbine, and similar uses. The grades of steels covered here are: Grade B4B, Grade B4C, and Grade B4D. Steels of Grades B4B and...

ASTM E3508-25 - Standard Practice for Reporting the Counts, Sizes, and Types of Particulate Matter on the Surfaces of Single-Use Bioprocessing Equipment
September 15, 2025 - ASTM International

4.1 Any risks to final drug product purity from particulate matter on the surfaces of single-use bioprocessing equipment (single-use systems (SUS)) depend on if the SUS is implemented upstream or downstream of sterilizing grade filters or in aseptic processes (see "Recommendations for the...

ASTM E410-24 - Standard Test Method for Moisture and Residue in Liquid Chlorine
October 1, 2024 - ASTM International

5.1 This test method provides for the determination of moisture and residue in liquid chlorine. The concentration levels of these impurities are important factors in many commercial uses of liquid chlorine.

ASTM E1617-09(2024) - Standard Practice for Reporting Particle Size Characterization Data
February 1, 2024 - ASTM International

1.1 This practice covers reporting particle size measurement data. 1.2 This practice applies to particle size measurement methods, devices, detail levels, and data formats for dry powders, and wet suspensions of solids, gels, or emulsion droplets. This practice does not pertain to...

ASTM C830-00(2023) - Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
August 1, 2023 - ASTM International

1.1 These test methods cover the determination of the following properties of refractory shapes: 1.1.1 Apparent porosity, 1.1.2 Liquid absorption, 1.1.3 Apparent specific gravity, and 1.1.4 Bulk density. 1.2 These test methods are applicable to all refractory shapes except those that...

ASTM D7941/D7941M-23 - Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
January 15, 2023 - ASTM International

1.1 This test method describes contaminant determination in fuel cell grade hydrogen as specified in relevant ASTM and ISO standards using cavity ring-down spectroscopy (CRDS). This standard test method is for the measurement of one or multiple contaminants including, but not limited to,...

ASTM D8166-22 - Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors (Withdrawn 2025)
October 1, 2022 - ASTM International

5.1 This test method is intended for use in the laboratory or in the field to evaluate the cleanliness of distillate fuels, and liquid biofuels, such as biodiesel and diesel blends. This specific test method and the precision statement applies to off-line analysis. Note 5: These PCMs can be...

ASTM D6021-22 - Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
April 1, 2022 - ASTM International

5.1 Residual fuel oils can contain H2S in the liquid phase, and this can result in hazardous vapor phase levels of H2S in storage tank headspaces. The vapor phase levels can vary significantly according to the headspace volume, fuel temperature, and agitation. Measurement of...

ASTM E381-22 - Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
June 1, 2022 - ASTM International

4.1 Macroetching is used in the steel industry because it is a simple test that will provide information about the relative homogeneity of the sample. The method employs the action of an acid or other corrosive agent to develop the macrostructural characteristics of a suitably prepared specimen....

ASTM D7619-22 - Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
April 1, 2022 - ASTM International

5.1 This test method is intended for use in the laboratory or in the field for evaluating the cleanliness of distillate fuels, and liquid bio fuels. It is not applicable to on or in-line applications. 5.2 This test method offers advantage over traditional filtration methods in that it is a...

UL 2583 - Accessoires de réservoirs de carburant pour liquides inflammables et combustibles
December 8, 2021 - ULSE

1.1 These requirements cover mechanical type accessories that are typically intended for attachment to storage tanks or connecting pipe for flammable and combustible liquids in commercial (public) or private (fleet) automotive fueling station and similar storage or dispensing applications...

ULC 2583 - Accessoires de réservoirs de carburant pour liquides inflammables et combustibles
December 8, 2021 - ULSE

1.1 These requirements cover mechanical type accessories that are typically intended for attachment to storage tanks or connecting pipe for flammable and combustible liquids in commercial (public) or private (fleet) automotive fueling station and similar storage or dispensing applications...

ASTM A437/A437M-15(2021) - Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
September 1, 2021 - ASTM International

This specifications covers alloy-steel bolting material specially heat treated for high-temperature service, such as steam turbine, gas turbine, and similar uses. The grades of steels covered here are: Grade B4B, Grade B4C, and Grade B4D. Steels of Grades B4B and...

SNZ AS/NZS ISO 8124.3 - Safety of Toys Part 3: Migration of certain elements
February 12, 2021 - SNZ

This document specifies maximum acceptable levels and methods of sampling, extraction and determination for the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials and from parts of toys. Maximum acceptable levels are...

ASTM A352/A352M-21 - Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
March 1, 2021 - ASTM International

1.1 This specification2 covers steel castings for valves, flanges, fittings, and other pressure-containing parts intended primarily for low-temperature service. 1.2 Several grades of ferritic steels and one grade of martensitic steel are covered. Selection of analysis will depend on...

ASTM D7230-06(2021) - Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates
February 1, 2021 - ASTM International

5.1 Safety-related service water system (SWS) components are designed to provide adequate cooling to equipment essential to the safe operation and shutdown of the plant. Linings in these systems are installed to maintain the integrity of the system components by preventing corrosion and erosion of...

ASTM D8166-21a - Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Condition Monitors
March 1, 2021 - ASTM International

5.1 This test method is intended for use in the laboratory or in the field to evaluate the cleanliness of distillate fuels, and liquid biofuels, such as biodiesel and diesel blends. This specific test method and the precision statement applies to off-line analysis. Note 4: These PCMs can be...

Advertisement