loading
MPIF LIQUID SINTERING - LIQUID PHASE SINTERING
MPIF
A description is not available for this item.
SWRI APPLYING LIQUID SEAL - Applying Liquid Sealants Program
January 1, 2001 - SWRI

This training program is designed to train new employees or use as a refresher course for experienced personnel.

ASTM D6688-20(2026) - Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique
June 1, 2026 - ASTM International

4.1 Many types of printed matter, notably container labels, packaging materials, magazine and book covers, must be resistant to liquid materials that may contact them advertently or inadvertently. This practice permits an assessment of resistance of printed matter to several types of...

ASTM D4713-12(2026) - Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
June 1, 2026 - ASTM International

4.1 Nonvolatile content of printing inks is useful for specification acceptance between the producer and the user. 4.2 In order to obtain accurate results for heatset systems within the specified 3?h heating time, the specimen film thickness must be less than 100 g/m2, and the oven must have forced...

ASTM E2071-21(2026) - Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
July 1, 2026 - ASTM International

1.1 This practice describes the calculation of the heat of vaporization of a liquid or the heat of sublimation of a solid from measured vapor pressure data. It is applicable to pure liquids, azeotropes, pure solids, and homogenous solid solutions over the temperature range for which...

ASTM D8456-26 - Standard Test Method for Determination of Nitrosamines in Water by Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
July 1, 2026 - ASTM International

1.1 This test method covers the liquid chromatography tandem mass spectrometry (LC-MS/MS) detection and quantitation of N-nitrosamines after direct injection. It has been validated for groundwater, surface water, wastewater influents, and wastewater effluents. This test method is not limited...

ASTM D7884-26 - Standard Test Method for Determination of 4-Carboxybenzaldehyde and p -Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
July 1, 2026 - ASTM International

1.1 This test method covers the determination of the 4-Carboxybenzaldehyde (4-CBA) and p-Toluic acid (p-TOL) in purified terephthalic acid (PTA) by reverse phase high performance liquid chromatography (HPLC). 1.2 This method is applicable for 4-CBA and p- TOL with upper limits of 24.5?mg/kg...

ASTM D7483-26 - Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
July 1, 2026 - ASTM International

1.1 This test method covers the measurement of dynamic viscosity and derivation of kinematic viscosity of liquids, such as new and in-service lubricating oils, by means of an oscillating piston viscometer. 1.2 This test method is applicable to Newtonian and non-Newtonian liquids;...

ASTM D445-26 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
July 1, 2026 - ASTM International

1.1 This test method specifies a procedure for the determination of the kinematic viscosity, ?, of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. The dynamic...

ASTM D1319-26 - Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
July 1, 2026 - ASTM International

5.1 The determination of the total volume?percent of saturates, olefins, and aromatics in petroleum fractions is important in characterizing the quality of petroleum fractions as gasoline blending components and as feeds to catalytic reforming processes. This information is also important in...

ASTM D8606-26 - Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Modified Continuously Closed Cup (MCCCFP) Tester
May 1, 2026 - ASTM International

1.1 This test method covers the procedure for a finite flash point test, within the range of -25?°C to 90?°C, of liquid wastes using an MCCCFP tester. This test method is used in the determination of flash point of liquid wastes. Note 1: The connection of tap water or a cooling device...

ASTM D1712-09(2026) - Standard Practice for Resistance of Plastics to Sulfide Staining
July 1, 2026 - ASTM International

4.1 Plastic compositions containing salts of lead, cadmium, copper, antimony, and certain other metals (as stabilizers, pigments, driers, or fillers) may stain due to the formation of a metallic sulfide when in contact with external materials that contain sulfide. The external sulfide source may be...

ASTM D5482-26 - Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)
May 1, 2026 - ASTM International

5.1 Vapor pressure is an important physical property of volatile liquids. 5.2 Vapor pressure is critically important for both automotive and aviation gasolines, affecting starting, warm-up, and tendency to vapor lock with high operating temperatures or high altitudes. Maximum vapor pressure...

ASTM D8463/D8463M-26 - Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric, Silyl-Terminated Polymer Based Waterproofing Membrane for Use with Separate Wearing Course
June 15, 2026 - ASTM International

1.1 This specification describes the required properties and test methods for a one or two-component, cold liquid-applied elastomeric-type membrane comprised of silyl-terminated polyether polymer, silyl-terminated polyurethane polymer, or a blend of the two polymers for waterproofing...

ASTM D7945-26 - Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
July 1, 2026 - ASTM International

5.1 Many petroleum products are used as lubricants and the correct operation of the equipment depends upon the appropriate viscosity of the liquid being used. In addition, the viscosity of many petroleum fuels is important for the estimation of optimum storage, handling, and operational...

ASTM F3826-26 - Standard Specification for Liquid Energy Storage Systems for Light Sport Category Aircraft
May 1, 2026 - ASTM International

1.1 This specification covers requirements for liquid energy storage systems-fuel tanks-for light sport category aircraft. 1.2 This specification only addresses liquid energy storage systems that are either vented to the atmosphere or are pressurized to less than one atmosphere. 1.3...

ASTM E1209-18(2026) - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
May 1, 2026 - ASTM International

5.1 Liquid penetrant testing methods indicate the presence, location, and, to a limited extent, the nature and magnitude of the detected discontinuities. This method is normally used for production inspection of large volumes of parts or structures, where emphasis is on productivity. The...

ASTM E1001-21(2026) - Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
July 1, 2026 - ASTM International

1.1 This practice describes procedures for the ultrasonic examination of bulk materials or parts by transmitting pulsed, longitudinal waves through a liquid couplant into the material and observing the indications of reflected waves (see Fig. 1). It covers only examinations in which one...

ASTM D1460-86(2026) - Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
April 1, 2026 - ASTM International

3.1 This test method gives the rubber technologist two means to evaluate the effect of liquids on rubber vulcanizates or rubbery materials. Volatile, nonvolatile, and other liquids that require pressure to maintain a liquid state may be used. Data obtained on rubbery materials...

Advertisement