loading
DIN MACHINERY SAFETY - DIN MACHINERY SAFETY - 3 VOLUME SET
DIN
A description is not available for this item.
DIN MACHINERY SAFETY CD - DIN MACHINERY SAFETY ON CD-ROM
DIN
A description is not available for this item.
FORD MACHINERY/EQUIPMENT - MACHINERY & EQUIPMENT GUIDELINES
FORD
A description is not available for this item.
MACHINERY'S - MACHINERY'S HANDBOOK
HI/HYDRAUL
A description is not available for this item.
JIS MACHINE TOOLS HDBK - JIS Machine Tools Handbook
January 1, 2019 - JSA
A description is not available for this item.
JIS MACHINE ELEMENTS HDBK - JIS Machine Elements Handbook (Excluding Fasteners & Screw Threads)
January 1, 2019 - JSA
A description is not available for this item.
ASTM D6110-26 - Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
July 1, 2026 - ASTM International

1.1 This test method is used to determine the resistance of plastics to breakage by flexural shock as indicated by the energy extracted from standardized (see Note 1) pendulum-type hammers, mounted in standardized machines, in breaking standard specimens with one pendulum swing. This test...

HUMAN-MACHINE INTERFACE D - Human-Machine Interface Design for Process Control Applications
January 1, 2009 - ISA
A description is not available for this item.
ASTM B777-15(2026) - Standard Specification for Tungsten Base, High-Density Metal
July 1, 2026 - ASTM International

1.1 This specification covers the requirements for four classes of machinable, high-density tungsten base metal produced by consolidating metal powder mixtures, the composition of which is mainly tungsten. This material specification may be used for bare parts or for parts that may be coated...

ASTM C129-26 - Standard Specification for Dry-Cast Nonloadbearing Concrete Masonry Units
July 15, 2026 - ASTM International

1.1 This specification covers dry-cast hollow and solid nonloadbearing concrete masonry units machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. These units are intended for use in nonloadbearing partitions, but under...

ASTM D4966-22(2026) - Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
July 1, 2026 - ASTM International

5.1 Acceptance Testing-this test method is not considered satisfactory for acceptance testing of commercial shipments of fabric. The between-laboratory precision of this test method is poor and, because of the nature of abrasion testing itself, technicians frequently fail to obtain results in...

ASTM A234/A234M-26 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
July 1, 2026 - ASTM International

1.1 This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. These fittings are for use in pressure piping and in pressure vessel fabrication for...

ASTM D3262-26 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
July 1, 2026 - ASTM International

1.1 This specification covers machine-made fiberglass pipe intended for use in gravity-flow systems for conveying sanitary sewage, storm water, and some industrial wastes. Both glass-fiber-reinforced thermosetting-resin pipe (RTRP) and glass-fiber-reinforced polymer mortar pipe (RPMP) are...

ASTM D6456-10(2026) - Standard Specification for Finished Parts Made from Polyimide Resin
July 1, 2026 - ASTM International

1.1 This specification is intended to be a means of calling out finished plastic parts ready for industrial or consumer use. 1.2 This specification covers finished parts and shapes from which parts are machined, made from a semi-crystalline polyimide (PI). 1.3 This specification is intended...

ASTM D5848-20(2026) - Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
July 1, 2026 - ASTM International

1.1 This test method covers the measurement of mass per unit area of machine-made woven, knitted, and tufted pile yarn floor covering both before and after an adhesive-back coating application. 1.2 This test method encompasses three techniques for determination of mass per unit area as...

ASTM A420/A420M-26 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
July 1, 2026 - ASTM International

This specification covers wrought carbon steel and alloy steel pipe fittings of seamless and welded construction for use in pressure piping and pressure vessel service at low temperatures. Materials shall consist of forgings, bars, plates, seamless or fusion welded tubular products with filler...

ASTM D8394-21(2026) - Standard Test Method for Automated Measurement of Maturity, Fineness, Ribbon Width, and Micronaire of Cotton Fibers
July 1, 2026 - ASTM International

5.1 Cotton fiber that is on average finer and more mature is more desirable than coarse or immature fiber, although distinction between these qualities cannot be made quickly and accurately using current test methods. Immature fibers break more easily during processing and have a tendency to form...

ASTM D7919-26 - Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes
June 1, 2026 - ASTM International

5.1 This guide is intended to provide machinery maintenance and monitoring personnel with a guideline for performing filter debris analysis as a means to determine machine condition. Correlating the filter contaminants to 'normal' and 'abnormal' lube system operation provides early...

CASADING LOGIC: A MACHINE - Casading Logic: A Machine Control Methodology for Programmable Logic Controllers
January 1, 2003 - ISA

Learn how to create a functional machine control program for industrial equipment that is sequential in nature. The programming methodology starts by breaking the machine into its basic elements. These small and manageable elements allow the programmer to focus on large concerns...

ASTM G203-10(2026) - Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
June 1, 2026 - ASTM International

1.1 This guide covers and is intended for use in interpreting the friction forces recorded in reciprocating tribosystems. The guide applies to any reciprocating tribosystem, whether it is a wear or fretting test or an actual machine or device. 1.2 The energy dissipation guide was developed...

Advertisement