loading
ASTM C478/C478M-26 - Standard Specification for Circular Precast Reinforced Concrete Manhole Sections
May 15, 2026 - ASTM International

This specification covers the manufacture and purchase requirements of products used for the assembly and construction of circular vertical precast reinforced concrete manholes and structures used in sewer and water works. Reinforced concrete shall consist of cementitious materials, mineral...

ASTM C1964-26 - Standard Practice for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Post Backfill
February 1, 2026 - ASTM International

5.1 This is not a routine test. The values recorded are applicable only to the manhole being tested and at the time of testing. 5.2 This permits the ability to field test manholes in the installed state as a system. 5.3 This allows contractors to field test manholes.

ASTM F3080-21(2026) - Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector, Infrared Measurement, and CCTV Camera System
June 1, 2026 - ASTM International

1.1 Laser profiling is a non-contact inspection method used to create a pipe wall profile and internal measurement using a standard CCTV pipe inspection system, 360° laser light projector, a measurement by means of infrared sensors and geometrical profiling software. This practice covers the...

ASTM F3095-17a(2026) - Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System
June 1, 2026 - ASTM International

1.1 This practice covers the procedure for the post installation verification and acceptance of buried pipe deformation using a visible rotating laser light diode(s), a pipeline and conduit inspection analog or digital CCTV camera system and image processing software. The combination CCTV pipe...

ASTM C1821/C1821M-25 - Standard Practice for Installation of Underground Circular Precast Concrete Manhole Structures
September 1, 2025 - ASTM International

1.1 This practice covers the procedures to be followed in the planning, site preparation, installation, testing and backfilling of underground vertical reinforced circular precast concrete manholes and components manufactured in accordance with Specification C478/C478M and used in sewer,...

ASTM D3753-25 - Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
December 1, 2025 - ASTM International

This specification covers glass fiber-reinforced polyester manholes and wetwells for use primarily in sanitary and storm sewer applications. Manhole and wetwell cylinders, manway reducers, and connectors shall be produced from glass fiber-reinforced polyester resin with construction...

ASTM C891/C891M-25 - Standard Practice for Installation of Underground Precast Concrete Utility Structures
December 1, 2025 - ASTM International

1.1 This practice covers the procedures to be followed in the planning, site preparation, and installation of underground precast concrete utility structures. Concrete pipe and box culverts are not covered under this practice. Also, precast concrete manholes covered in Specification...

ASTM C877-25 - Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
October 1, 2025 - ASTM International

This specification deals with the metric standard for three types of external sealing bands to be used in conjunction with concrete pipe, manholes, and precast box sections. The first type of bands shall be composed of rubber, mastic, and protective film elements, while the second type shall...

ASTM C923/C923M-20(2025) - Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
April 1, 2025 - ASTM International

This specification covers resilient connectors between reinforced concrete manhole structures, pipes, and laterals. Resilient materials for connectors and filler rings shall be manufactured from natural or synthetic rubber and shall conform to the prescribed requirements. Mechanical devices...

ASTM C990/C990M-25 - Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
September 1, 2025 - ASTM International

1.1 This specification covers joints for precast concrete pipe and box, and other sections using preformed flexible joint sealants for use in storm sewers and culverts which are not intended to operate under internal pressure, or are not subject to infiltration or exfiltration limits. Joint...

ASTM C497/C497M-25 - Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
March 1, 2025 - ASTM International

These test methods cover production and acceptance tests for concrete pipes, manhole sections, and tiles. Tests include procedures for evaluating external load crushing strength, flat slab top, core strength, absorption, hydrostatic, permeability, manhole step, cylinder, gasket...

ASTM C139-25 - Standard Specification for Dry-Cast Concrete Masonry Units for Construction of Catch Basins and Manholes
July 1, 2025 - ASTM International

1.1 This specification covers dry-cast solid precast segmental concrete masonry units machine-made from hydraulic cement, water, and suitable mineral aggregates, with or without the inclusion of other materials. The units are intended for use in the construction of catch basins and manholes....

ASTM C1244/C1244M-20(2025) - Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
April 1, 2025 - ASTM International

1.1 This test method covers procedures for testing precast concrete manhole sections when using the vacuum test method to demonstrate the integrity of the installed materials and the construction procedures. This test method is used for testing concrete manhole sections utilizing...

ASTM D5813-04(2025) - Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
March 1, 2025 - ASTM International

1.1 This specification covers cured-in-place thermosetting resin pipe (CIPP), 4 through 132-in. (100 through 3353-mm) equivalent diameter, for use in gravity flow systems for conveying sanitary sewage, storm water, and certain industrial wastes. This specification is suited for the evaluation and...

ASTM F1143-19(2024) - Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight
May 1, 2024 - ASTM International

1.1 This specification provides design and construction criteria for a raised, bolted, oiltight and watertight manhole cover assembly. 1.2 The manhole cover assemblies depicted in this specification are for use in decks or bulkheads in which the manhole cover assemblies must be...

ASTM F1144-19(2024) - Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged
May 1, 2024 - ASTM International

1.1 This specification provides design and construction criteria for a semi-flush, oiltight and watertight bolted hinged manhole cover assembly. 1.2 The manhole cover assemblies depicted on this specification are for use in decks or bulkheads requiring oiltight and watertight covers...

ASTM F1142-19(2024) - Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight
May 1, 2024 - ASTM International

1.1 This specification provides design and construction criteria for a semi-flush, oiltight and watertight bolted manhole cover assembly. 1.2 The manhole cover assembly depicted in this specification is for use in decks or bulkheads requiring oiltight and watertight covers that are...

ASTM C969-24 - Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines and Manholes
September 1, 2024 - ASTM International

1.1 This practice covers procedures for testing installed precast concrete pipe sewer lines and manholes using either water infiltration or exfiltration acceptance limits to demonstrate the integrity of the installed materials and construction procedure. 1.2 This practice is the inch-pound...

ASTM F1759-97(2024) - Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
March 15, 2024 - ASTM International

4.1 Uses-The requirements of this practice are intended to provide manholes suitable for installation in pipeline or conduit trenches, landfill perimeters, and landfills with limited settlement characteristics. Direct installation in sanitary landfills or other fills subject to large (in...

ASTM C1719-24 - Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
May 1, 2024 - ASTM International

1.1 This test method covers procedures for testing precast concrete tanks (and installed accessories) used for on-site wastewater treatment, grease interception, grit/oil separation, water storage, or other applications requiring watertight construction and installation. This test method uses...

Advertisement