loading
NEBB MEASURING SOUND - PROCEDURAL STANDARDS FOR MEASURING SOUND AND VIBRATION
NEBB
A description is not available for this item.
MONITORING AND MEASURING - Monitoring and Measuring I&C Performance in Nuclear Power Plants
January 1, 2014 - ISA

Instrumentation and control (I&C) equipment ensures the safety, viability, and efficient operation of nuclear power plants by providing accurate and timely measurements of plant control and safety system variables, primarily temperature and pressure. The previously published papers collected in...

ASTM E1935-26 - Standard Practice for Calibrating and Measuring CT Density
June 15, 2026 - ASTM International

1.1 This practice covers instruction for determining the density calibration of X- and ?-ray computed tomography (CT) systems and for using this information to measure different material densities from CT images. The calibration is based on an examination of the CT image of a disk of...

ASTM E376-26 - Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
July 1, 2026 - ASTM International

4.1 General-Most thickness gauges are not applicable to all combinations of coating-substrate thicknesses and materials. The limitations of a particular instrument are generally delineated by its manufacturer. The substrate material and coating combination to be measured as well as the inherent...

ASTM D1092-26 - Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
June 1, 2026 - ASTM International

1.1 This test method covers measurement, in poises, of the apparent viscosity of lubricating greases in the temperature range from -54?°C to 38?°C (-65?°F to 100?°F). Measurements are limited to the range from 25?P to 100?000?P at 0.1?s-1 and 1?P to 100?P at 15?000?s-1. Note 1: At very low...

ASTM C1679-26 - Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
June 1, 2026 - ASTM International

1.1 This practice describes the apparatus and procedure for measuring relative differences in hydration kinetics of hydraulic cementitious mixtures, either in paste or mortar (see Note 1), including those containing admixtures, various supplementary cementitious materials (SCM), and other...

ASTM D1119-22(2026) - Standard Test Method for Percent Ash Content of Engine Coolants
August 1, 2026 - ASTM International

5.1 This test method is designed to aid in identifying types of coolants. While the ash is primarily due to the inorganic inhibitors used, it is not a measure of the total inhibitor concentration because of the loss of organic inhibitors. 5.2 An ash content greater than that stated in...

ASTM F2199-26 - Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
August 1, 2026 - ASTM International

1.1 This test method covers the determination of the change in linear dimensions of resilient floor tile/plank products after exposure to heat and reconditioning to ambient temperature. 1.2 This test method allows one to also measure curling that can occur after a specimen has been exposed...

ASTM E1354-26 - Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
August 1, 2026 - ASTM International

1.1 This fire-test-response standard provides for measuring the response of materials exposed to controlled levels of radiant heating with or without an external ignitor. 1.2 This test method is used to determine the ignitability, heat release rates, mass loss rates, effective heat of...

ASTM D6524/D6524M-26 - Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
July 1, 2026 - ASTM International

5.1 Resiliency may be used to control the quality of many TRMs. Resiliency may be indicative of a TRM's ability to retain original configuration after exposure to the stresses which may be exerted during manufacture, shipping, and installation. Resiliency is not generally indicative of field...

ASTM D4935-18(2026) - Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials
June 1, 2026 - ASTM International

1.1 This test method provides a procedure for measuring the electromagnetic (EM) shielding effectiveness (SE) of a planar material for a plane, far-field EM wave. From the measured data, near-field SE values can be calculated for magnetic (H) sources for electrically thin specimens.,...

ASTM E74-18(2026) - Standard Practices for Calibration and Verification for Force-Measuring Instruments
April 1, 2026 - ASTM International

1.1 The purpose of these practices is to specify procedures for the calibration of force-measuring instruments. Procedures are included for the following types of instruments: 1.1.1 Elastic force-measuring instruments, and 1.1.2 Force-multiplying systems, such as balances and small...

ASTM D2843-26 - Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
July 1, 2026 - ASTM International

1.1 This fire-test-response test method covers a laboratory procedure for measuring and observing the relative amounts of smoke obscuration produced by the burning or decomposition of plastics. It is intended to be used for measuring the smoke-producing characteristics of plastics...

ASTM D6347/D6347M-05(2026) - Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
July 15, 2026 - ASTM International

1.1 This test method covers procedures for determining the bulk density of coal using instrumentation that measures the relative backscatter of nuclear gamma radiation throughout the depth of the stockpile under test. 1.2 This procedure is applicable to all ranks of coal. 1.3 The values...

ASTM B930-03(2026) - Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
July 1, 2026 - ASTM International

1.1 This test method describes a procedure for measuring abnormally large grains and the frequency of those grains in cemented tungsten carbides (hardmetals). 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility...

ASTM D6657-16(2026) - Standard Test Method for pH of Wet Blue and Wet White
July 1, 2026 - ASTM International

4.1 This test method is designed to measure the pH of a distilled-water extract of Wet Blue and Wet White. This is considered to be a measure of the acidity or alkalinity of the Wet Blue or Wet White. Excessive acidity or alkalinity may have a deleterious effect on the aging...

ASTM D7997-21(2026) - Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
July 1, 2026 - ASTM International

5.1 General Utility: 5.1.1 This practice is suitable for research, quality control, specification testing and process control. 5.1.2 It is useful to define and verify the reactivity of non-foam polyurethane formulations. 5.2 Limitations: 5.2.1 Operator-to-operator variability and lab-to-lab...

ASTM D1238-26 - Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
July 15, 2026 - ASTM International

5.1 This test method is particularly useful for quality control tests on thermoplastics. 5.2 The data produced by this test method serves to indicate the uniformity of the flow rate of the polymer as made by an individual process. It is not to be used as an indication of uniformity of other...

ASTM D7674-14a(2026) - Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White
July 1, 2026 - ASTM International

4.1 This test method measures the amount of solvent-soluble (hexane or petroleum ether) materials in wet blue and wet white.

ASTM D8451-22(2026) - Standard Test Method for Calculation of Unfixed Chrome Concentration in Wet Blue
July 1, 2026 - ASTM International

5.1 This test method measures the amount of unfixed chrome in Wet Blue. Results may vary according to the age of the Wet Blue.

Advertisement