loading
ICBO MECHANICAL CODE - INTERNATIONAL MECHANICAL CODE
ICBO
A description is not available for this item.
ANSI MECHANICAL - ANSI MECHANICAL
IHS
A description is not available for this item.
ICBO MECHANICAL - INTERNATIONAL MECHANICAL CODE
ICBO
A description is not available for this item.
MPIF MECHANICAL ALLOYING - Mechanical Alloying and Milling
January 1, 2004 - MPIF
A description is not available for this item.
ISO HDBK MECHANICAL V2 - MECHANICAL VIBRATION AND SHOCK - VOLUME 2
ISO
A description is not available for this item.
IAPMO MECHANICAL CODE LL - UNIFORM MECHANICAL CODE LOOSE LEAF
IAPMO
A description is not available for this item.
ASHRAE STD 64 - Methods of Laboratory Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers
January 1, 2020 - ASHRAE

This standard provides a method of laboratory testing for obtaining performance data of remote mechanical-draft evaporative refrigerant condensers, including the following: a. Definition of terms b. Specification of data to be recorded c. Calculation formulas d. Test limits and...

ASHRAE STD 20 - Methods of Laboratory Testing Remote Mechanical-Draft Air-Cooled Refrigerant Condensers
January 4, 2019 - ASHRAE

This standard provides a. methods of laboratory testing for obtaining performance data, b. definitions of terms, c. specification of data to be recorded, d. calculation formulas, e. test limits and tolerances, and f. apparatus and instrumentation with associated accuracies. This standard does not...

CTI ATC-106 - ACCEPTANCE TEST CODE for MECHANICAL DRAFT EVAPORATIVE VAPOR CONDENSERS
July 1, 2011 - CTI

This Code applies to single circuit, mechanical draft, evaporative vapor condensers. The level of accuracy provided by tests conducted in accordance with this code is satisfactory for thermal acceptance testing and for establishing or confirming commercial ratings of evaporative vapor...

AHRI 460 - PERFORMANCE RATING OF REMOTE MECHANICAL- DRAFT AIR-COOLED REFRIGERANT CONDENSERS
January 1, 2005 - AHRI

Purpose. The purpose of this standard is to establish for Remote Mechanical-Draft Air-Cooled Condensers: definitions; test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions. This standard applies...

AHRI 491 SI - Performance Rating of Remote Mechanical-Draft Evaporatively-Cooled Refrigerant Condensers
January 1, 2011 - AHRI

This standard applies to Evaporative Condensers as defined in Section 3 of this standard and is limited to Halocarbon Refrigerants and ammonia (R-717), for use with or without external air resistance. Purpose. The purpose of this standard is to establish for Remote Mechanical-Draft...

AHRI 490 I-P - Performance Rating of Remote Mechanical-Draft Evaporatively-Cooled Refrigerant Condensers
January 1, 2011 - AHRI

This standard applies to Evaporative Condensers as defined in Section 3 of this standard and is limited to Halocarbon Refrigerants and ammonia (R-717), for use with or without external air resistance. Purpose. The purpose of this standard is to establish for Remote Mechanical-Draft...

JIS B 8609 - Performance tests of mechanical draft cooling tower
March 20, 2008 - JSA
A description is not available for this item.
ASTM A493-25 - Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
March 1, 2025 - ASTM International

This specification covers cold-finished and hot-finished stainless steel wire and wire rods for cold heading or cold forging for applications, such as fasteners, where corrosion resistance is a factor. The steel shall conform to the required chemical composition requirements. The material shall...

AHRI 490 - Remote Mechanical-Draft Evaporatively-Cooled Refrigerant Condensers
January 1, 2003 - AHRI
A description is not available for this item.
ASTM D4120-07(2024) - Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests
November 1, 2024 - ASTM International

1.1 This test method describes the measurement of fiber cohesion as the dynamic cohesive force required to maintain drafting in rovings, slivers or tops when they are subjected to stress induced by passing between pairs of drafting rolls of different surface speeds. The cohesive force...

CTI ESG-153 - Recommended Guidelines for Portland Cement Concrete for Mechanical Draft Cooling Towers
February 1, 2007 - CTI

This guideline offers recommendations for the use of Portland cement concrete in the use of mechanical draft cooling towers. The contents are applicable for towers, basins and auxiliary structures of both cast in place and precast concrete construction, except for prestressed...

JIS B 8617 - Remote mechanical-draft air-cooled refrigerant condenser
March 1, 1994 - JSA
A description is not available for this item.
Advertisement