loading
ANSI MECHANICAL - ANSI MECHANICAL
IHS
A description is not available for this item.
ICBO MECHANICAL CODE - INTERNATIONAL MECHANICAL CODE
ICBO
A description is not available for this item.
ICBO MECHANICAL - INTERNATIONAL MECHANICAL CODE
ICBO
A description is not available for this item.
MPIF MECHANICAL ALLOYING - Mechanical Alloying and Milling
January 1, 2004 - MPIF
A description is not available for this item.
IAPMO MECHANICAL CODE LL - UNIFORM MECHANICAL CODE LOOSE LEAF
IAPMO
A description is not available for this item.
ISO HDBK MECHANICAL V2 - MECHANICAL VIBRATION AND SHOCK - VOLUME 2
ISO
A description is not available for this item.
JIS MECHANICAL HDBK - JIS Mechanical Instrumentation Handbook
January 1, 2019 - JSA
A description is not available for this item.
ASTM E2425-21(2026) - Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
July 1, 2026 - ASTM International

5.1 This test method demonstrates conformity of a dynamic mechanical analyzer at an isothermal temperature of 21 °C. 5.2 Dynamic mechanical analysis experiments often use linear temperature change. This test method does not address the effect of that change in temperature on the loss...

ASTM E3301-26 - Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
July 1, 2026 - ASTM International

5.1 Dynamic mechanical analysis monitors changes in the viscoelastic properties (that is, storage modulus, loss modulus, tangent angle delta) of a material as a function of temperature and frequency, providing a means to quantify these changes. In many cases, the value to be assigned is the...

ASTM D7540-26 - Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller
June 1, 2026 - ASTM International

5.1 The results obtained with a mechanical muller do not necessarily correlate directly with an industrial situation where different dispersing conditions exist. However, dispersion with a mechanical muller is a quick and inexpensive way to prepare specimens for testing the color and...

MPIF TRENDS IN MECHANICAL - Trends in Mechanical Alloying
January 1, 2001 - MPIF
A description is not available for this item.
ASTM D5114/D5114M-90(2026) - Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
July 15, 2026 - ASTM International

4.1 This test method uses specific starting point conditions for the froth flotation response to accomplish the following: 4.1.1 Assess responses of one or more coals or blends of coal, and 4.1.2 Evaluate and determine froth flotation circuit performance.

ASTM D5417-21(2026) - Standard Practice for Operation of the Vettermann Drum Tester
July 1, 2026 - ASTM International

1.1 This practice describes the equipment and operation of the Vettermann drum tester for testing pile yarn floor covering to produce changes in appearance and color due to changes in surface structure by mechanical action. 1.2 This practice is only applicable for use in testing unused pile...

ASTM E2912-26 - Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
May 1, 2026 - ASTM International

1.1 This fire-test-response standard assesses the ability of non-mechanical fire dampers used in vented construction in its open state to limit passage of hot gases, radiation, and flames during a prescribed fire test exposure. The fire exposure condition in this test method is sudden direct...

ASTM A554-26 - Standard Specification for Welded Stainless Steel Mechanical Tubing
April 1, 2026 - ASTM International

This guide covers standard specification for welded stainless steel tubing for mechanical applications where appearance, mechanical properties, or corrosion resistance is needed. The tubes shall be made from flat-rolled steel by an automatic welding process without the addition of...

ASTM A788/A788M-26a - Standard Specification for Steel Forgings, General Requirements
August 1, 2026 - ASTM International

This specification covers a group of common requirements that, unless covered by the individual product specification in another ASTM document, applies to steel forgings for general use. Materials shall be produced primarily by either electric-furnace, basic oxygen, vacuum-induction (VIM), or...

ASTM B930-03(2026) - Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
July 1, 2026 - ASTM International

5.1 The microstructure and grain growth of cemented tungsten carbides affect the material's mechanical and physical properties. The grain size and distribution will affect the material's wear resistance and fracture toughness. Abnormally large grains as compared to the background may...

ASTM B777-15(2026) - Standard Specification for Tungsten Base, High-Density Metal
July 1, 2026 - ASTM International

This specification establishes the requirements for four classes of machinable, high-density tungsten base metal produced by consolidating metal powder mixtures, the composition of which is mainly tungsten. This material specification may be used for bare parts or for parts that may be coated with...

Advertisement