loading
LIA/LASER LASER SAFETY - LASER SAFETY GUIDE
LIA/LASER
A description is not available for this item.
ASTM F2602-18(2025) - Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
October 1, 2025 - ASTM International

1.1 This test method covers the determination of the molar mass of chitosan and chitosan salts intended for use in biomedical and pharmaceutical applications as well as in tissue-engineered medical products (TEMPs) by size exclusion chromatography with multi-angle laser light...

ASTM F3604-23 - Standard Practice for Validating the Additive Manufacturing (AM) Production Process for Medical Devices Produced Using Laser Powder Bed Fusion
October 15, 2023 - ASTM International

1.1 This practice provides an overview of how to perform process validation for medical devices manufactured using PBF/LB/M. The topics that will be covered include machine qualifications, software used in the manufacturing process, the importance of design specification and verification on...

ASTM F2605-16(2025) - Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
January 1, 2025 - ASTM International

1.1 This test method covers the determination of the molar mass (typically expressed as grams/mole) of sodium alginate intended for use in biomedical and pharmaceutical applications as well as in tissue-engineered medical products (TEMPs) by size exclusion chromatography with multi-angle...

ASTM F2819-24 - Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing, and Wire to be Used for Medical Devices
August 15, 2024 - ASTM International

5.1 Significance-With the birth of minimally invasive surgery in the 1960s, there has been a requirement for guide wires. The guide wires serve as the access line by which procedures like balloon angioplasty and stent placement are conducted. A guide wire typically consists of a mandrel, coil, and...

ASTM F3659-24 - Standard Guide for Bioinks Used in Bioprinting
March 15, 2024 - ASTM International

1.1 This guide is a resource for bioprinting tissue-engineered medical products (TEMPs) with bioinks and biomaterial inks. There are existing standards that cover biomaterials and scaffolds in a more general fashion (Guide F2150, Guide F2027, ISO 10993 series). This guide focuses...

BS IEC 60825-8 - Safety of laser products - Part 8: Guidelines for the safe use of medical laser equipment
May 15, 2000 - BSI

Provides guidance for the employer and user covering the subject areas of beam delivery systems, biological effects of laser radiation, reporting of accidents and dangerous situations and checklists.

JIS MEDICAL DEVICES I - JIS Medical Devices I Handbook
January 1, 2015 - JSA
A description is not available for this item.
JIS MEDICAL DEVICES III - JIS Medical Devices III Handbook
January 1, 2015 - JSA
A description is not available for this item.
JIS MEDICAL DEVICES II - JIS Medical Devices II Handbook
January 1, 2015 - JSA
A description is not available for this item.
JIS MEDICAL DEVICES IV - JIS Medical Devices IV Handbook
January 1, 2015 - JSA
A description is not available for this item.
UL 60335-2-113 - Household and Similar Electrical Appliances - Safety - Part 2-113: Particular Requirements for Beauty Care Appliances Incorporating Lasers and Intense Light Sources
January 27, 2023 - ULSE

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of beauty care appliances incorporating lasers or intense light sources for household and similar purposes, where their operation relies on contact with the skin, their rated voltage being...

ISO 22248 - Lasers and laser-related equipment — Test methods for laser-induced damage threshold — Classification of medical beam delivery systems
November 1, 2020 - ISO

This document specifies a method of testing the laser-induced ignition and damage of medical beam delivery systems to allow checking of suitable products according to the classification system. NOTE 1 Take care when interpreting these results, since the direct applicability of the...

Laser-Matter Interaction for Radiation and Energy
March 15, 2021 - CRC

The interaction of high-power lasers with matter can generate Terahertz radiations that efficiently contribute to THz Time-Domain Spectroscopy and also would replace X-rays in medical and security applications. When a short intense laser pulse ionizes a gas, it may produce new...

DS/EN IEC 60601-2-22 - Medical electrical equipment – Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
November 2, 2020 - DS

201.1 Scope, object and related standards Clause 1 of the general standard1 applies, except as follows: 201.1.1 Scope Replacement: This part of IEC 60601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of laser equipment for surgical, therapeutic, medical diagnostic, cosmetic or...

Handbook of Laser Technology and Applications Volume 3: Applications
September 29, 2020 - CRC

The invention of the laser was one of the towering achievements of the twentieth century. At the opening of the twenty-first century we are witnessing the burgeoning of the myriad technical innovations to which that invention has led. The Handbook of Laser Technology and Applications...

Handbook of Laser Technology and Applications Volume 1: Principles
September 29, 2020 - CRC

The invention of the laser was one of the towering achievements of the twentieth century. At the opening of the twenty-first century we are witnessing the burgeoning of the myriad technical innovations to which that invention has led. The Handbook of Laser Technology and Applications...

IEC 60601-2-22 REDLINE - Medical electrical equipment – Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
November 1, 2019 - IEC

This part of IEC 60601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of laser equipment for surgical, therapeutic, medical diagnostic, cosmetic or veterinary applications, intended for use on humans or animals, classified as LASER PRODUCT of CLASS 1C where the ENCLOSED...

Advertisement