loading
JIS MEDICAL DEVICES I - JIS Medical Devices I Handbook
January 1, 2015 - JSA
A description is not available for this item.
JIS MEDICAL DEVICES III - JIS Medical Devices III Handbook
January 1, 2015 - JSA
A description is not available for this item.
JIS MEDICAL DEVICES II - JIS Medical Devices II Handbook
January 1, 2015 - JSA
A description is not available for this item.
JIS MEDICAL DEVICES IV - JIS Medical Devices IV Handbook
January 1, 2015 - JSA
A description is not available for this item.
ASTM F3306-26 - Standard Test Method for Ion Release Evaluation of Medical Implants
June 1, 2026 - ASTM International

5.1 Components of implanted medical devices can release ions, which may lead to adverse biological effects if released in sufficient quantities. Therefore, it may be necessary to characterize the ion release behavior over time to verify that a medical device or device components or...

ASTM E3357-26 - Standard Terminology for Combination Products (Drug/Medical Device/Biologic Combinations)
April 1, 2026 - ASTM International

3.1 Currently, there are a variety of terminologies and interpretations applied across jurisdictions globally with respect to combined use of medical products in which two or more differently regulated medical products are to be used together or are being studied for use together to...

ASTM F2100-26 - Standard Specification for Medical Face Masks
February 15, 2026 - ASTM International

This specification covers the classifications, performance requirements, and test methods for the materials used in the construction of medical face masks that are used in health care services such as surgery and patient care. Medical face mask material performance is based on testing...

ASTM F2063-26 - Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
June 1, 2026 - ASTM International

This specification covers the chemical, physical, mechanical, and metallurgical requirements for wrought nickel-titanium bar, flat rolled products, and tubing containing nominally 54.5 % to 57.0 % nickel and used for the manufacture of medical devices and surgical implants. The material...

ASTM F2901-26 - Standard Guide for Neurotoxicity Evaluation and Additional Biocompatibility Assessment for Medical Devices Contacting the Nervous System
May 1, 2026 - ASTM International

5.1 The objective of this guide is to recommend biological tests that can be used in addition to the testing recommended in Practice F748 for medical devices contacting the nervous system. This guide is primarily designed to evaluate neurotoxicity caused by medical devices that...

ASTM F3811-26 - Standard Guide for Ontology of Extracellular Matrices for Use as Tissue Engineered Medical Products
May 1, 2026 - ASTM International

1.1 This standard intends to serve as a foundational document for individuals and organizations involved in the development, production, delivery, and regulation of extracellular matrices (ECMs) and related tissue products used in tissue engineered medical products (TEMPs). 1.2 This standard...

ASTM F2503-26 - Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
May 1, 2026 - ASTM International

1.1 This practice applies to medical devices and other items that are anticipated to enter the magnetic resonance (MR) environment. Note 1: "Medical devices and other items" will be referred to as "items" for the remainder of this practice. 1.2 The practice specifies the marking of...

ASTM F3206-26 - Standard Guide for Assessing Medical Device Cytocompatibility with Delivered Cellular Therapies
May 1, 2026 - ASTM International

4.1 This guide is designed to assist medical device manufacturers as they develop new devices or qualify existing devices (e.g., catheters, needles) for delivering clinical cell therapies (ISO 23033). Cytocompatibility considers the impact of the delivery device on the cells passing through...

ASTM D1601-18(2026) - Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
July 1, 2026 - ASTM International

1.1 This test method covers the determination of the dilute solution viscosity of ethylene polymers at 135°C. It is applicable to a reasonably wide spectrum of ethylene polymers having densities from 0.910 to 0.970 g/cm2. Directions are given for the determination of relative viscosity (viscosity...

ASTM D445-26 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
July 1, 2026 - ASTM International

1.1 This test method specifies a procedure for the determination of the kinematic viscosity, ?, of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. The dynamic viscosity, ?,...

ASTM F2062-00(2026) - Standard Specification for Square Drive Interconnections on Surgical Instruments
May 1, 2026 - ASTM International

This specification covers the dimensions and tolerances for both driving and driven elements in square drive interconnections on stainless steel surgical instruments used for drilling, tapping, driving, or placing of medical devices during surgery. The specification is intended to lessen the...

ASTM F1671/F1671M-26 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
July 1, 2026 - ASTM International

5.1 This test method is based on Test Method F903 for measuring resistance of chemical protective clothing materials to penetration by liquids. This test method is normally used to evaluate specimens from individual finished items of protective clothing and individual samples of materials that are...

IEEE BIO-MEDICAL - BIO-MEDICAL TELEMETRY
IEEE
A description is not available for this item.
ASTM D1319-26 - Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
July 1, 2026 - ASTM International

1.1 This test method covers the determination of hydrocarbon types of total aromatics, total olefins, and total saturates in petroleum fractions that distill below 315?°C. Samples containing dark-colored components that interfere in reading the chromatographic bands cannot be analyzed. Note 1: For...

ASTM F2315-26 - Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels
May 1, 2026 - ASTM International

4.1 The main use is to immobilize, support, or suspend living cells or tissue in a matrix. The use of an encapsulation/immobilization system may protect cells or tissues from immune rejection. When immobilizing biological material in alginate gels, there are numerous parameters that must be...

Advertisement