loading
AWWA METERS SET - AWWA METERS SET
AWWA
A description is not available for this item.
ASTM E3137/E3137M-26 - Standard Specification for Heat Meter Instrumentation
March 1, 2026 - ASTM International

1.1 This specification defines general specifications for heat meters. Heat meters are instruments that measure heat in heat exchange circuits in which energy is absorbed (cooling) or given up (heating) by a flowing liquid. 1.2 For this specification, the necessary elements of a heat...

ASTM D2624-26 - Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
July 1, 2026 - ASTM International

1.1 These test methods cover the determination of the electrical conductivity of aviation and distillate fuels with and without a static dissipator additive. The test methods normally give a measurement of the conductivity when the fuel is uncharged, that is, electrically at rest (known as the rest...

ASTM D2084-19a(2026) - Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
April 1, 2026 - ASTM International

1.1 This test method covers the use of the oscillating disk cure meter for determining selected vulcanization characteristics of vulcanizable rubber compounds. 1.2 ISO 3417 is very similar to this test method. It has minor technical differences that are not considered to be significant. 1.3...

ASTM E3534-26 - Standard Test Method for Vacuum Insulating Glass Durability
July 1, 2026 - ASTM International

1.1 This test method covers procedures for testing the durability of preassembled, permanently sealed vacuum insulating glass (VIG) units. 1.2 This test method is applicable only to VIG units that are constructed with flat glass lites (glass panes). 1.3 This test method is applicable to units made...

ASTM F2961-26 - Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
April 1, 2026 - ASTM International

1.1 This test method is used for evaluating how gloves affect an individual wearer's ability to grip onto a hard surface object. 1.1.1 This test method establishes procedures for measuring the maximum torque that can be attained by an individual's bare hand as compared to the maximum torque that is...

ASTM F433-02(2026) - Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
June 1, 2026 - ASTM International

1.1 This practice covers a means of measuring the amount of heat transfer quantitatively through a material or system. 1.2 This practice is similar to the Heat Flow Meter System of Test Method C518, but modified to accommodate small test samples of higher thermal conductance. 1.3 The values...

ASTM D5289-19a(2026) - Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
April 1, 2026 - ASTM International

1.1 This test method covers a method for the measurement of selected vulcanization characteristics of rubber compounds using unsealed and sealed torsion shear cure meters. The two types of instruments may not give the same results. Note 1: An alternative method for the measurement of...

ASTM D6846-02(2026) - Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
June 1, 2026 - ASTM International

4.1 Laboratory proofing of inks is necessary to establish a reproducible prediction of print appearance and performance properties, most of which are highly sensitive to ink film thickness. The apparatus described in this practice has found wide use for routine control proofing because it provides...

ASTM D653-26a - Standard Terminology Relating to Soil, Rock, and Contained Fluids
May 15, 2026 - ASTM International

3.1 Definitions in this standard are to be regarded as the correct ones for terms found in other ASTM standards of Committee D18. Certain terms may be found in more than one standard issued under the jurisdiction of this committee and many of these terms have been placed in this standard. 3.2 Terms...

ASTM F2840-26a - Standard Practice for Design and Manufacture of Electric Engine for Light Sport Aircraft
May 1, 2026 - ASTM International

1.1 This practice covers minimum requirements for the design and manufacture of Electric Engines for light sport aircraft, VFR use. The Electric Propulsion System (EPS) shall as a minimum consist of the electric engine, associated controllers, disconnects and wiring, and EPS monitoring gauges and...

ASTM C204-26 - Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
May 1, 2026 - ASTM International

1.1 These test methods cover determination of the fineness of hydraulic cement, using the Blaine air-permeability apparatus, in terms of the specific surface expressed as total surface area in square centimeters per gram, or square meters per kilogram, of cement. Two test methods are given:...

ASTM B703-21(2026) - Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
March 1, 2026 - ASTM International

5.1 The apparent density is an important measure of a material characteristic of the powder that is useful to the powder producers and powder users in determining quality and lot to lot consistency. 5.2 This test method is applicable to free-flowing and non-free-flowing metal powders, lubricated...

ASTM F2840-26 - Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft
March 1, 2026 - ASTM International

1.1 This practice covers minimum requirements for the design and manufacture of Electric Propulsion Units (EPU) for light sport aircraft, VFR use. The EPU shall as a minimum consist of the electric engine, associated controllers, disconnects and wiring, an Energy Storage Device (ESD) such as a...

ASTM D8160-20(2026) - Standard Test Method for Un-notched Cantilever Beam Impact Resistance (Izod Impact) Testing of Thermoplastic Pavement Marking Materials
March 1, 2026 - ASTM International

1.1 This test method covers the sample preparation for cantilever beams and test methodology of thermoplastic pavement marking materials, similar to the "Izod Impact" method listed in Test Method D4812. 1.1.1 Some methods call for results in inch pound-force (in.·lbf) as opposed to the common foot...

ASTM E408-13(2025) - Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
December 1, 2025 - ASTM International

These test methods cover determination of the total normal emittance of surfaces by means of portable, inspection-meter instruments. At least two different types of instruments are commercially available for performing this measurement. Test Method A uses an instrument which measures radiant...

ASTM C173/C173M-26 - Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
January 1, 2026 - ASTM International

4.1 This test method covers the determination of the air content of freshly mixed concrete. It measures the air contained in the mortar fraction of the concrete, but is not affected by air that may be present inside porous aggregate particles. 4.1.1 Therefore, this is the appropriate test to...

ASTM E2832-26 - Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
March 1, 2026 - ASTM International

1.1 This test method covers a measurement of the wet retroreflective (RL-2) properties of horizontal pavement marking materials, such as traffic stripes and road surface symbols. A standardized method utilizing a standardized continuous wetting device and a portable retroreflectometer is described...

ASTM F855-26 - Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
March 1, 2026 - ASTM International

1.1 These specifications cover the equipment making up the temporary grounding system used on de-energized electric power lines, electric supply stations, and equipment. 1.2 It is common practice for the users of protective grounding equipment to prepare complete instructions and regulations to...

Advertisement