1.1 This guide is designed for application at a wide range of sediment sites where non-aqueous phase liquid (NAPL) is present or suspected to be present. This guide describes emplacement mechanisms that can result in NAPL presence within sediment and how the characteristics of the sediment, aquatic...
1.1 Many contaminants (such as petroleum products and coal tar) are emplaced in sediment in the form of an immiscible liquid, known as a non-aqueous phase liquid (NAPL). NAPL can either be a light non-aqueous phase liquid (LNAPL) that is less dense than water or a dense non-aqueous phase liquid...
5.1 In this guide, test methodologies and data collection metrics for demonstrating adequate design and performance characteristics of DAA systems in accordance with Specification F3442/F3442M are outlined. DAA systems are essential for BVLOS flight operations for UAS as they enable the UAS...
4.1 Intended Users: 4.1.1 This guide may be used by various parties involved in programs evaluating the movement of NAPL in sediment, including regulatory agencies, project sponsors, environmental consultants, risk assessors, site remediation professionals, environmental contractors, environmental...
1.1 This guide provides guidance to develop manufacturer-specifi
5.1 Ergonomic assessment tools are useful to safety professionals for quantifying LBD risks. However, there are currently no industry standards for assessing changes in LBD risk when a worker wears a back exoskeleton (also commonly referred to as a back-assist exoskeleton, back-support-exoskel
4.1 Testing machines that apply and indicate torque are used in many industries, in many ways. They may be used in a research laboratory to measure material properties, and in a production line to qualify a product for shipment. No matter what the end use of the machine may be, it is necessary for...
1.1 This guide is designed for application at a wide range of sediment sites where non-aqueous phase liquid (NAPL) is present or suspected to be present. This guide describes emplacement mechanisms that can result in NAPL presence within sediment and how the characteristics of the sediment, aquatic...
4.1 This guide is aimed at providing a range of in vivo model and experimental-related
1.1 The purpose of this test method is to specify the apparatuses, procedures, and performance metrics necessary to quantitatively measure a robot's visual acuity as displayed to a remote operator or vision algorithm. The primary performance metric for this test method shall be a...
1.1 This terminology identifies and precisely defines terms as used in the standard test methods, practices, and guides for evaluating response robots intended for hazardous environments. Further discussions of the terms can be found within the standards in which the terms appear. 1.2 The term...
1.1 This terminology identifies and precisely defines terms as used in the standard test methods, practices, and guides for evaluating response robots intended for hazardous environments. Further discussions of the terms can be found within the standards in which the terms appear. 1.2 The term...
1.1 This guide addresses the use of flux chambers for quantifying the transport of gas and non-aqueous phase liquids (NAPL)/contaminants from sediment to surface water by ebullition. Degradation of labile organic compounds in the sediment can generate biogenic gas that can migrate through the...
Narrow Your Results