loading
ASTM E2677-26 - Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
March 1, 2026 - ASTM International

1.1 In harmony with the Joint Committee for Guides in Metrology (JCGM) and detection concepts of the International Union of Pure and Applied Chemistry (IUPAC) (1, 2), this test method uses a series of replicated measurements of an analyte at dosage levels giving instrumental responses that...

ASTM E1297-26 - Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
February 1, 2026 - ASTM International

5.1 Refer to Practice E261 for a general discussion of the determination of decay rates, reaction rates, and neutron fluence rates with threshold detectors (1-29). Refer to Practice E1006, Practice E185, and Guide E1018 for the use and application of results obtained by this test method (30-32). 5...

ASTM E2624-17(2025) - Standard Practice for Torque Calibration of Testing Machines
October 1, 2025 - ASTM International

1.1 This practice covers procedures and requirements for the calibration of torque for static and quasi-static torque capable testing machines. These may, or may not, have torque indicating systems and include those devices used for the calibration of hand torque tools. Testing machines may be...

ASTM D4753-25 - Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
July 1, 2025 - ASTM International

1.1 This guide provides minimum requirements for general-purpose balances and standard masses used in testing soil, rock, and related construction materials. 1.2 This guide provides guidance for evaluating, selecting, and specifying general purpose balances and standard masses used in testing soil,...

ASTM F2979-20(2025) - Standard Guide for Characterization of Wear from the Articulating Surfaces in Retrieved Metal-on-Metal and Other Hard-on-Hard Hip Prostheses
June 15, 2025 - ASTM International

1.1 This standard guide provides options and a compendium of information for measuring the bearing surface and estimating the in vivo wear of explanted Metal-on-Metal (MoM) and other "hard" (for example, ceramic) hip components. The guide covers the measurement of acetabular cups and femoral heads...

ASTM E4-24 - Standard Practices for Force Calibration and Verification of Testing Machines
September 1, 2024 - ASTM International

5.1 Testing machines that apply and indicate force are used in many industries, in many ways. They might be used in a research laboratory to measure material properties, or in a production line to qualify a product for shipment. No matter what the end use of the testing machine may be, it is...

ASTM F3294-18(2024) - Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
October 1, 2024 - ASTM International

1.1 This guidance document has been developed to facilitate the collection of microscopy images with an epifluorescence microscope that allows quantitative fluorescence measurements to be extracted from the images. The document is tailored to cell biologists that often use fluorescent staining...

ASTM D4753-24 - Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
February 1, 2024 - ASTM International

1.1 This guide provides minimum requirements for general-purpose balances and standard masses used in testing soil, rock, and related construction materials. 1.2 This guide provides guidance for evaluating, selecting, and specifying general purpose balances and standard masses used in testing soil,...

ASTM E181-23 - Standard Guide for Detector Calibration and Analysis of Radionuclides in Radiation Metrology for Reactor Dosimetry
February 15, 2023 - ASTM International

1.1 This guide covers general procedures for the calibration of radiation detectors and measurement for radiation metrology for reactor dosimetry. For any particular radionuclide, one or more of these methods may apply. 1.2 These techniques are concerned only with specific radionuclide...

ASTM E617-23 - Standard Specification for Laboratory Weights and Precision Mass Standards
August 15, 2023 - ASTM International

1.1 This specification covers weights and mass standards used in laboratories, specifically classes 000, 00, 0, 1, 2, 3, 4, 5, 6, and 7. This specification replaces National Bureau of Standards Circular 547, Section 1, which is out of print. 1.2 This specification and calibration method is intended...

ASTM E3376-23 - Standard Practice for Calibration and Usage of Germanium Detectors in Radiation Metrology for Reactor Dosimetry
February 15, 2023 - ASTM International

1.1 This standard establishes techniques for calibration, usage, and performance testing of germanium detectors for the measurement of gamma-ray emission rates of radionuclides in radiation metrology for reactor dosimetry. The practice is applicable only to samples of small size,...

ASTM E2911-23 - Standard Guide for Relative Intensity Correction of Raman Spectrometers
April 1, 2023 - ASTM International

4.1 Generally, Raman spectra measured using grating-based dispersive or Fourier transform Raman spectrometers have not been corrected for the instrumental response (spectral responsivity of the detection system). Raman spectra obtained with different instruments may show significant variations in...

ASTM C1919-22 - Standard Practice for Measurement of the Steady-State Thermal Transmission Properties of Small Specimens Using the Heat Flow Meter Apparatus
December 1, 2022 - ASTM International

5.1 Thermal conductivity measurements on small insulation specimens are important during new product development processes or when larger specimens cannot be collected during forensic investigation (that is, failure analysis) (1, 2). 5.2 Numerous research projects have recently been initiated to...

ASTM D8146-22 - Standard Guide for Evaluating Test Method Capability and Fitness for Use
November 1, 2022 - ASTM International

4.1 This guide provides the developers of test methods with systematic approaches to evaluate the inherent adequacy (capability) of the precision and the adequacy of between-laboratory standardization as determined by interlaboratory testing in accordance with Practice D6300 for a new or modified...

ASTM 51707-22 - Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
December 1, 2022 - ASTM International

1.1 This standard provides guidance on the use of concepts described in the JCGM (Joint Committee for Guides in Metrology) Evaluation of Measurement Data - Guide to the Expression of Uncertainty in Measurement (GUM) to estimate the uncertainties in the measurement of absorbed dose in...

ASTM 51707-22e1 - Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
December 1, 2022 - ASTM International

1.1 This standard provides guidance on the use of concepts described in the JCGM (Joint Committee for Guides in Metrology) Evaluation of Measurement Data - Guide to the Expression of Uncertainty in Measurement (GUM) to estimate the uncertainties in the measurement of absorbed dose in...

J1757/1_202108 - Standard Metrology for Vehicular Displays
August 24, 2021 - SAE International

The scope of this SAE Standard is to provide methods to determine display optical performance in all typical automotive ambient light illumination, with focus on high ambient contrast ratio, which is critical for display legibility in a sunshine environment. It covers indoor measurements and...

Characterization, Testing, Measurement, and Metrology
October 26, 2020 - CRC

This book presents the broad aspects of measurement, performanceanalysis, and characterization for materials and devices through advanced manufacturing processes. The field of measurement and metrology as a precondition for maintaining high-quality products, devices, and systems in materials...

ASTM E3330-22 - Standard Guide for Contents of Documentation and Statistical Treatments for Reference Materials for Metals, Ores, and Related Materials
April 1, 2022 - ASTM International

5.1 This guide is intended for use by developers of RMs and CRMs for the metals and mining industries. 5.2 The guidance is related to uniform procedures and requirements and is intended to prevent the proliferation of widely varying documentation practices, definitions, and terminology. Where the...

ASTM E542-22 - Standard Practice for Gravimetric Calibration of Laboratory Volumetric Instruments
January 1, 2022 - ASTM International

1.1 This practice covers procedures for use in the calibration of volumetric instruments that include glassware, plasticware, and laboratory standards that are in common use in chemical, analytical, clinical, and calibration laboratories. It is based on the gravimetric determination of the quantity...

Advertisement