loading
IEEE MICROWAVE HDBK - MICROWAVE ENGINEERING HANDBOOK, THREE-VOLUME SET
IEEE
A description is not available for this item.
IEEE MICROWAVE ELECTRONIC - MICROWAVE ELECTRONIC DEVICES
IEEE
A description is not available for this item.
IEEE MICROWAVE INTEGRATED - MICROWAVE INTEGRATED CIRCUITS
IEEE
A description is not available for this item.
IEEE MICROWAVE MOBILE - MICROWAVE MOBILE COMMUNICATIONS
IEEE
A description is not available for this item.
IEEE NONLINEAR MICROWAVE - NONLINEAR MICROWAVE CIRCUITS
IEEE
A description is not available for this item.
ASTM F1360-25a - Standard Specification for Ovens, Microwave, Electric
December 1, 2025 - ASTM International

This specification covers commercial microwave ovens. These ovens use ultrahigh frequency electromagnetic radiation in the approved industrial, scientific, and medical bands to defrost, heat, and cook food. The microwave ovens are classified by types, sizes, groups, styles, and...

ASTM D4309-18(2026) - Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
May 1, 2026 - ASTM International

1.1 This practice covers the general considerations for quantitative sample digestion for total metals in water using closed vessel microwave heating technique. This practice is applicable to surface, saline, domestic, and industrial wastewater. 1.2 Because of the differences among various...

ASTM D7876-26 - Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
March 1, 2026 - ASTM International

1.1 This practice covers the procedure for use of microwave radiation for sample decomposition prior to elemental determination by atomic spectroscopy. 1.1.1 Although this practice is based on the use of inductively coupled plasma atomic emission spectrometry (ICP-AES) and atomic absorption...

ASTM D8607-26 - Standard Test Method for Determination of Selected Elements in Aqueous Solutions by Single Quadrupole Inductively Coupled Plasma-Mass Spectrometry (ICP-MS)
July 1, 2026 - ASTM International

1.1 This test method covers the determination of dissolved elements in ground waters, surface waters, and drinking water. It may also be used for determination of total recoverable or total element concentrations in these waters as well as wastewater, mine-impacted waters, and digested biosolids,...

ASTM D4643-25 - Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
October 1, 2025 - ASTM International

1.1 This test method outlines procedures for determining the water content of soils by incrementally drying soil in a microwave oven. The test specimens called "soils" in this test method can include any amount of rock and gravel. 1.2 This test method can be used as a substitute for Test...

ASTM E3101-18(2025) - Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints
September 1, 2025 - ASTM International

1.1 This practice covers microwave (MW) examination of butt fusion joints made entirely of polyethylene for the purpose of joining polyethylene piping or vessel parts. Note 1: The notes in this practice are for information only and shall not be considered part of this practice. Note 2: This...

ASTM F1360-25 - Standard Specification for Ovens, Microwave, Electric
March 1, 2025 - ASTM International

This specification covers commercial microwave ovens. These ovens use ultrahigh frequency electromagnetic radiation in the approved industrial, scientific, and medical bands to defrost, heat, and cook food. The microwave ovens are classified by types, sizes, groups, styles, and...

ASTM C1607-12(2025) - Standard Test Method for Determination of "Microwave Safe for Reheating" for Ceramicware
June 1, 2025 - ASTM International

1.1 This test method determines the suitability of ceramicware for use in microwave re-heating applications. Microwave ovens are mainly used for reheating and defrosting frozen foods. Severe thermal conditions can occur while reheating foods. Typical reheating of foods requires one to...

ASTM E1979-25 - Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
October 1, 2025 - ASTM International

5.1 Ultrasonic extraction using dilute nitric acid is a simpler and easier method for extracting lead from environmental samples than are traditional digestion methods that employ hot plate or microwave digestion with concentrated acids (3), (5), (7), (8). Hence, ultrasonic extraction may be...

ASTM E3102-18(2025) - Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application
September 1, 2025 - ASTM International

1.1 This practice covers microwave (MW) examination of electrofusion joints made entirely of polyethylene for the purpose of joining polyethylene piping. Note 1: The notes in this practice are for information only and shall not be considered part of this practice. Note 2: This practice...

ASTM E1645-25 - Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
August 1, 2025 - ASTM International

1.1 This practice covers the sample preparation procedures for paint samples that are collected during the assessment, management or control of lead hazards. 1.2 This practice describes the digestion procedures using a hot plate or microwave oven or similar apparatus for paint samples that...

ASTM D5765-25 - Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
June 1, 2025 - ASTM International

1.1 This practice covers the solvent extraction of total petroleum hydrocarbon (TPH) from soils and sediments, using closed vessel microwave heating, for subsequent determination by gravimetric or gas chromatographic techniques. 1.2 This practice is recommended only for solid samples that...

ASTM E1522-93(2025) - Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
July 1, 2025 - ASTM International

This specification covers the requirements for autoclavable protective coatings on laboratory glassware. These coatings will not prevent the escape of liquids from vessels under pressure. Materials shall be tested and shall conform to requirements for physical and chemical resistance,...

ASTM D8322-25 - Standard Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES)
July 1, 2025 - ASTM International

1.1 This test method covers the determination of metals and other elements in residual fuel and crude oil by microwave plasma atomic emission spectroscopy (MP-AES). The specific elements within the scope of this method are V, Ni, Ca, Na, Al, Si, Zn, P, and S for residual fuel oil and Fe, V,...

Advertisement